• Journal of the Korean Institute of Gas
• /
• v.17 no.2
• /
• pp.36-43
• /
• 2013

In order to asses gas production behavior for $CO_2$ ECBM, the sorption charcteristics on coal are considered to be a key factor. In this study, we have investigated the change of the sorption rate of adsorbed gas as a function of pressure and temperature below the appropriate depth for $CO_2$-ECBM. The experiment were carried out under four different temperatures varying from $15^{\circ}C$ to $45^{\circ}C$, while the coal pressure was varied from atmosphere to 1,400 psi for every temperature. From this results, the sorption rate both $CO_2$ and $CH_4$ increased with increasing the coal pressure. Otherwise, the sorption rate both $CH_4$ and $CO_2$ decreased linearly as the coal temperature increased. From the sensitivity studies on pressure and temperature change, it was experimentally identified that $CO_2$ sequestration rate and $CH_4$ production rate are better at deeper depths below a depth of 800 m in coal seams. However, the results showed continued decline in the increasing ratio of ECBM with formation depth.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1514-1515
• /
• 1998

Diamond thin films were deposited on n-type (100) Si wafers from $H_2-CH_4$ gas mixture by rf PACVD. Prior to deposition, mechanical scratching was done to improve density of nucleation sites with diamond paste of 3${\mu}m$. The microstructure of deposited diamond thin films was studied by using the following conditions : discharge power of 500W, $H_2$ flow rate of 50sccm, reaction pressure of 20torr, and $CH_4/H_2$ ratio of 0.3$\sim$1%. The deposited diamond thin films showed that the crystallite was increased at the lower methane concentration. The deposited thin films were characterized by Scanning Electron Microscopy. Raman Spectroscopy and Fourier-Transform Infrared Spectroscopy.

• Journal of Environmental Science International
• /
• v.1 no.2
• /
• pp.33-48
• /
• 1992

Since November 1990, the observations of methane (CH4) level have been carried out at Tae-ahn Peninsula (TAP) in Korea. Analysis on atmospheric data obtained in the period from November 1990 to August 1992 is carried out and the results are included in this study. We 임ole that CIL does not have a clear seasonal cycle with a minor maximum in August- september and with a minimum in June-July. The variations in monthly average level are much larger with 1765.01∼ 1857.21 pub (amplitude 92.20 ppb). The occurrence of a minimum in June-July is due to the inflow of the North Pacific air, an increase of OH radical and due to a decrease in CH4 emission from rice paddy. A maximum in August and September appears to result from an increase in organic materials in agriculture (rice paddy) and forests, inputs of local sources due to weak airflows, stagnation of the warm and moist air and from a decrease in OH radical.'rho present analysis indicates that according to CH4 data from Mongolia and from several sites in North Pacific TAP is influenced as much as 31 pub in average from the inputs of Chinese omission. When the atmospheric CH4 of TAP is compared with data observed at Korea National University of Education (KNU), the values of KNU are higher (127 ppb) than those of TAP. It is clear that air samples taken at KNU are influenced strongly by local sources in central Korea than those at TAP. According to analysis of trajectories and airflows, we find that there are 4 types in classification. Firstly, when an air flow is originated mainly in China values of CH4 gas are in medium ranges. Secondly, when an airflow is from both local (Korea) and China we find higher values. Thirdly, with an airflow from both local (Korea) and Japan origins medium values are recorded. Fourths)r, when an airflow of maritime origin arrives low values of atmospheric CH4 are observed at TAP.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.7
• /
• pp.387-394
• /
• 2004

Diamond films were deposited on the cemented tungsten carbide WC-Co cutting insert substrates by using both microwave plasma chemical vapor deposition(MWPCVD) and radio frequency plasma chemical vapor deposition (RFPCVD) from $CH_4$$-H_2$$-O_2$ gas mixture. Scanning electron microscopy and X-ray diffraction techniques were used to investigate the microstructure and phase analysis of the materials and Raman spectrometry was used to characterize the quality of the diamond coating. Diamond films deposited using MWPCVD from $CH_4$$-H_2$$-O_2$ gas mixture show a dense, uniform, well faceted and polycrystalline morphology. The compressive stress in the diamond film was estimated to be (1.0∼3.6)$\pm$0.9 GPa. Diamond films which were deposited on the WC-Co cutting insert substrates by RFPCVD from $CH_4$$-H_2$$-O_2$ gas mixture show relatively good adhesion, very uniform, dense and polycrystalline morphology.

• Korean Journal of Materials Research
• /
• v.14 no.2
• /
• pp.157-162
• /
• 2004

The object of this research is to develop a carbon molecular sieve(below CMS) which can separate selectively to convert mixture gases spout at waste landfill into fuel. And this research is meaningful from the viewpoint of a quality improvement of CH$_4$ gas and an utilization of by-product. CMS was prepared using coconut shell powder as starting material and the effects of activators, temperature and modifier on the reaction were investigated in this research. Also, pore diameter, surface area of CMS and adsorption rate were measured and studied by cahn balance and ASAP2010. Its specific surface area and pore distribution were controlled easily at 800^{\circ}C and adsorption rate was very good. The CMS prepared in this research is shown to be able to separate landfill gases very effectively.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.73-74
• /
• 2015

Synthesis gas such as hydrogen and carbon monoxide was produced from $CH_4/oxygen$ mixture using insulated pressurized porous media combustor. Experimentally, two cylindrical SiC foams with the different pore density were piled up in a quartz tube and fully premixed mixture was supplied in the axial direction. After stabilizing fuel-rich flame at the interface of the two foams at several pressure conditions, mole fractions of synthesis gases were measured by gas chromatography. Heat recirculation through the inner foam structure could extend the flow velocity of stable region over the laminar burning velocity. As the pressure increased, the rich flammability limit, $H_2/CO$ ratio, and module M increased.

• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.104-111
• /
• 2001

B-doped hydrogenated amorphous silicon carbide (a-SiC:H) thin films were prepared by plasma-enhanced chemical-vapor deposition in a gas mixture of $SiH_4, CH_4,\;and\; B_2H_6$. Physical and chemical properties of a-SiC:H films grown with varing the ratio of $B_2H_6/(SiH_4+CH_4)$ were characterized with various analysis methods including scanning electron microscopy (SEM), X-ray diffractometry (XRD), Raman spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, secondary ion mass spectroscopy (SIMS), UV absorption CH_4spectroscopy and electrical conductivity measurements. With the B-doping concentration, the doping efficiency and the micro-crystallinity were decreased and the film became amorphous when $B_2H_6/(SiH_4{plus}CH_4)$ was over $5{\times}10^{-3}$. The addition of $B_2H_6$ gas during deposition decreased the H content in the film by lowering the quantity of Si-C-H bonds. Consequently, the optical band gap and the activation energy of a-SiC:H films were decreased with increasing the B-doping level.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.11a
• /
• pp.20-21
• /
• 2002

• Korean Chemical Engineering Research
• /
• v.49 no.3
• /
• pp.367-371
• /
• 2011

TBAB (tetra-n-butyl ammonium bromide) forms a semi-clathrate with water under atmospheric pressure conditions and recently has attracted great attention due to its usage as a thermodynamic promoter in gas storage and separation process using gas hydrate formation. In this study, we measured the three-phase (hydrate (H) - liquid water ($L_{w}$)-vapor (V)) equilibria of the ternary $CH_{4}$+TBAB+water and $CO_{2}$+TBAB+water mixtures at the TBAB concentrations of 5 and 32 wt% to investigate promoting characteristics of TBAB. The greater promotion effect of TBAB was observed at 32 wt% than at 5 wt%. This result was in good agreement with that from pure TBAB semi-clathrate phase diagram under atmospheric pressure conditions. Through $^{13}C$ NMR analysis of the $CH_{4}$+TBAB semi-clathrate, it was found that $CH_{4}$ molecules are enclathrated in the cages of the double semi-clathrate and the position of resonance peak from encaged $CH_{4}$ molocules in the double semi-clathrate is the same as that from encaged $CH_{4}$ molocules in the pure $CH_{4}$ hydrate of structure I.

• Membrane Journal
• /
• v.25 no.1
• /
• pp.27-31
• /
• 2015

PEBAX[poly(ether-block-amide)]-NaY zeolite composite membrane was studied on the permeability of penetrant $H_2$, $N_2$, $CO_2$ and $CH_4$ and the selectivity. When the NaY zeolite contents of PEBAX-NaY zeolite membranes were increased, the permeability of $H_2$ was increased, but the permeability of $N_2$, $CH_4$ and $CO_2$ was decreased. By the addition of NaY zeolite into PEBAX, the gas selectivity for $H_2$, $N_2$ and $CO_2$ was decreased except the increase of selectivity of $H_2/N_2$. $CO_2/N_2$, $H_2/CO_2$ and Gas/$CH_4$. The highest selectivity among these gases was from $CO_2$. In particular, the gas selectivity for $CO_2$ was the greatest with a value of 12~156.