• Journal of the Korean Ceramic Society
• /
• v.30 no.11
• /
• pp.911-918
• /
• 1993

X-ray photoelectron spectroscopy(XPS) has been empolyed to investigate the structure of PbO-Bi2O3-Ga2O3 glasses. XPS OIS spectra recorded from binary PbO-Ga2O3 glasses clearly showed the presence of two peacks due to bridging and non-bridging oxygens, respectively. Gaussin best-fit deconvolution of the OIS peaks suggested there are substaintial amount of non-bridging oxygens in the structure. Therefore, in addition to the glassforming and charge compensating roles of PbO as suggested from the previous works, role of PbO as network modifiers needs to be considered. Addition of Bi2O3 to binary glasses resulted in the rapid decrease in the amount of non-bridging oxygens as well as in values of FWHM (Full Width at the Half Maximum intensity). It is believed that Bi2O3 form distorted BiO6 octahedra and therefore, work as intermediates. Infrared spectra also suggested that Ga2O3 behave as network-formers in the form of GaO4- tetrahedra.

• Journal of Surface Science and Engineering
• /
• v.48 no.6
• /
• pp.303-308
• /
• 2015

Pd-functionalized ${\beta}-Bi_2O_3$ nanowires are synthesized by thermal evaporation of Bi powder using VLS mechanism followed by Pd coating and annealing. In this study, sensing properties of Pd-functionalized ${\beta}-Bi_2O_3$ nanowires sensor to selected concentrations of $NO_2$ gas were examined. Scanning electron microscopy showed that the nanowires with diameters in a range of 100 - 200 nm and lengths of up to a few tens of micrometers. Transmission electron microscopy and X-ray diffraction confirmed that the products corresponded to the nanowires of ${\beta}-Bi_2O_3$ crystals and Pd nanoparticles. Pd-functionalized ${\beta}-Bi_2O_3$ nanowires sensor showed an enhanced sensing performance to $NO_2$ gas compared to as-synthesized ${\beta}-Bi_2O_3$ nanowires sensor. As synthesized and Pd-functionalized ${\beta}-Bi_2O_3$ nanowire sensors showed responses of 178% - 338% and 196% - 535% at $300^{\circ}C$, respectively, to 0.05 - 2 ppm $NO_2$. In addition, the underlying mechanism of the enhancement of the sensing properties of ${\beta}-Bi_2O_3$ nanowires by Pd-functionalization is discussed.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.85-87
• /
• 2002

The $(Ba_xBi_{0.6-x}Sr_{0.4})TiO_3$[x=0.1, 0.2, 0.3] ceramics were prepared by conventional mixed oxide method The structural properties of the $(Ba_xBi_{0.6-x}Sr_{0.4})TiO_3$[x=0.1, 0.2, 0.3] ceramics with the sintering temperature($1200^{\circ}C,\;1250^{\circ}C,\;1300^{\circ}C$) were investigated by XRD, SEM, EDS. Increasing the sintering temperature, the intensity of the $Ba_{0.5}Sr_{0.5}TiO_3$ (100), (110), (111), (200), (310) peaks and $SrBi_4Ti_4O_{15}$ (319), (040) peaks were increased. The gram of the $(Bi_{0.2}Ba_{0.4}Sr_{0.4})TiO_3$ ceramics sintered at $1250^{\circ}C$ were fine and uniform. Increasing the sintering temperature. the average gram size of the $(Bi_{0.2}Ba_{0.4}Sr_{0.4})TiO_3$ ceramics were decreased. The density of $(Bi_{0.1}Ba_{0.5}Sr_{0.4})TiO_3$ ceramics sintered at $1250^{\circ}C$ was 5.4524 [$g/cm^2$].

• Journal of the Korean Magnetics Society
• /
• v.8 no.4
• /
• pp.203-209
• /
• 1998

Crystallographic and magnetic properties of single phase garnet $Y_{3-x}Bi_xFe_5O_{12}$ (x=0.0, 0.25, 0.5, 0.75, 1.0) were studied by using x-ray diffraction, Mossbauer spectroscopy and vibrating sample magnetometer (VSM). Ultra-fine polycrystalline cubic samples have been prepared by sol-gel method. The lattice constant increase linearly with increasing an amount of Bi. Annealing temperature was larger than 800 $^{\circ}C$ for the growth of a single-phase garnet powder. The second phase of garnet, $(BiFeO_3)$, was at 1000 $^{\circ}C$ for x=0.75, and 950 $^{\circ}C$ for x=1.00. From Mossbauer spectroscopy and VSM measurements, the magnetization and the coercivity were decreased and the Curie temperature $Y_{3-x}Bi_xFe_5O_{12}$(x=0.0, 0.25, 0.5, 0.75, 1.0) was slightly increased as increasing the Bi content.

• Journal of the Korean Ceramic Society
• /
• v.38 no.6
• /
• pp.558-567
• /
• 2001

본 연구에서는 알콕사이드를 전구물질로 하는 졸겔공정을 이용하여 Bi 과잉 12 mol%의 조성인 B $i_4$ $Ti_3$ $O_{12}$ 박막과 B $i_4$ $Ti_{3-x}$T $a_{x}$ $O_{12}$(x=0.1, 0.2, 0.3) 박막을 제조하였다. XPS 분석에 따르면 Ta 치환 x=0.2에서 Bi 4f의 photoemission 곡선이 낮은 결합에너지로 이동하였고 피크 강도가 감소하는 현상이 관측되었다. 이는 x=0.1과 0.2 사이에서 Bi-O 결합이 길어져 인장상태 하에 있었음을 나타내었다. B $i_4$ $Ti_3$ $O_{12}$(BIT) 박막의 유전상수와 유전손실은 100 kHz에서 340, 0.05이었고, B $i_4$ $Ti_{3-x}$T $a_{x}$ $O_{12}$ 박막에서 이들 값은 x=0.1에서 가장 높았으며, 각각 480, 0.13이었다. B $i_4$ $Ti_3$ $O_{12}$ 박막의 잔류분극과 항전계는 1.24$\mu$C/$ extrm{cm}^2$, 31.4 kV/cm 이었으나, Ta 치환 x=0.2에서 이들 값은 각각 19.7$\mu$C/$\textrm{cm}^2$, 49.5 kV/cm 에 이르렀다. 또한, B $i_4$ $Ti_3$ $O_{12}$ 박막의 누설전류 밀도는 ~$10^{-6}$ A/$\textrm{cm}^2$ 정도이었으며, Ta 치환은 누설전류를 감소시켜 Ta 치환 x=0.2 이상에서 BIT 박막에 비해 한 차수 정도 낮아졌다. Ta 치환에 따른 B $i_4$ $Ti_3$ $O_{12}$ 전기 물성에서 변화는 Bi-O 결합에서 관측된 인장상태로의 전이와 연관성이 있었으며, 덧붙여 치환에서 생성된 전자에 의한 정공보상이 이에 영향을 끼쳤다. 정공보상이 이에 영향을 끼쳤다.끼쳤다.

• Korean Journal of Materials Research
• /
• v.22 no.12
• /
• pp.689-695
• /
• 2012

We have examined the co-doping effects of 1/2 mol% NiO and 1/4 mol% $Cr_2O_3$ (Ni:Cr = 1:1) on the reaction, microstructure, and electrical properties, such as the bulk defects and the grain boundary properties, of ZnO-$Bi_2O_3-Sb_2O_3$ (ZBS; Sb/Bi = 0.5, 1.0, and 2.0) varistors. The sintering and electrical properties of Ni,Cr-doped ZBS, ZBS(NiCr) varistors were controlled using the Sb/Bi ratio. Pyrochlore ($Zn_2Bi_3Sb_3O_{14}$), ${\alpha}$-spinel ($Zn_7Sb_2O_{12}$), and ${\delta}-Bi_2O_3$ were detected for all of compositions. For the sample with Sb/Bi = 1.0, the Pyrochlore was decomposed and promoted densification at lower temperature by Ni rather than by Cr. A homogeneous microstructure was obtained for all of the samples affected by ${\alpha}$-spinel. The varistor characteristics were not dramatically improved (non-linear coefficient, ${\alpha}$ = 5~24), and seemed to form ${Zn_i}^{{\cdot}{\cdot}}$(0.17 eV) and ${V_o}^{\cdot}$(0.33 eV) as dominant defects. From impedance and modulus spectroscopy, the grain boundaries were found to have been divided into two types, i.e., one is tentatively assigned to ZnO/$Bi_2O_3$ (Ni,Cr)/ZnO (0.98 eV) and the other is assigned to a ZnO/ZnO (~1.5 eV) homojunction.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.1
• /
• pp.35-40
• /
• 2009

Lead free positive temperature coefficient of resistivity (PTCR) ceramics based on $BaTiO_3-(Bi_{0.5}Na_{0.5})TiO_3$ solid solution were prepared by a conventional solid state reaction method. The phase structure was showed single phase with perovskite structure regardless calcinations temperature and $Ba_{1-x}(Bi_{0.5}Na_{0.5})_xTiO_3$ structure was transformed from tetragonal to orthorhombic phase at $x{\geq}0.15$ mole. The XRD peaks with $45^{\circ}{\sim}46^{\circ}$ shifted in right the influence of crystal structure change and the intensity of peak was decreased with additive $(Bi_{0.5}Na_{0.5})TiO_3$. The curie temperature risen with additive $(Bi_{0.5}Na_{0.5})TiO_3$ but disappeared for $(Bi_{0.5}Na_{0.5})TiO_3$ addition more than 0.15 mole in TMA. In relative permittivity, the curie temperature by the transform of ferroelectric phase risen with additive $(Bi_{0.5}Na_{0.5})TiO_3$ but decreased in relative permittivity. Also, the peak of new curie temperature showed the sample containing $0.025{\sim}0.045$ mole of $(Bi_{0.5}Na_{0.5})TiO_3$ near $70^{\circ}C$ caused by phase transform from ferroelectric to ferroelectric and the peak of new curie temperature disappeared at 0.045 mole of $(Bi_{0.5}Na_{0.5})TiO_3$. In our study, it was found that the PTCR in $BaTiO_3-(Bi_{0.5}Na_{0.5})TiO_3$ system was possible for $0{\sim}0.025$ mole of $(Bi_{0.5}Na_{0.5})TiO_3$ and the maximum curie temperature by phase transition showed about at $145^{\circ}C$.

• Journal of Magnetics
• /
• v.21 no.2
• /
• pp.168-172
• /
• 2016

$BiMnO_3$ has been a promising candidate as a magnetoelectric multiferroic while there have been many controversial reports on its ferroelectricity. The detailed analysis of its film growth, especially the growth of thin film having monoclinic symmetry has not been reported. We studied the effect of miscut angle, the substrate surface, and film thickness on the symmetry of $BiMnO_3$ thin film. A flat $SrTiO_3$ (110) substrate resulted in a thin film with three domains of $BiMnO_3$ and 1 degree miscut in the $SrTiO_3$ (110) substrate resulted in dominant domain preference in the $BiMnO_3$ thin film. The larger miscut resulted in a nearly perfect detwinned $BiMnO_3$ film with a monoclinic phase. This strong power of domain selection due to the step edge of the substrate was efficient even for the thicker film which showed a rather relaxed growth behavior along the $SrTiO_3$ [1-10] direction.

• Journal of the Korean Ceramic Society
• /
• v.29 no.2
• /
• pp.161-165
• /
• 1992

Nonlinear exponents and electron trap density variations were observered in ZnO-Bi2O3-MnO2 ternary ZnO varistors as a function of heat treatment temperature. Three kinds of ZnO varistor compositions were selected; i.e. 99.0 ZnO-0.5 Bi2O3-0.5 MnO2, 98.5 ZnO-1.0 Bi2O3-0.5 MnO2, and 98.0 ZnO-1.5 Bi2O3-0.5 MnO2 in mol%. Sintering was done at 1150$^{\circ}C$ for three hours, and heat treatments were done at 500$^{\circ}C$, 700$^{\circ}C$, and 900$^{\circ}C$. When heat treated at 500$^{\circ}C$, nonlinear exponents were increased regardless of the Bi2O3 amount. Increasing heat treatment temperature above 500$^{\circ}C$ resulted in lowering nonlinear exponents. Nonlinear exponents seem to be related to the 0.17 and 0.33 eV electron traps which are possibly of intrinsic origin.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.4
• /
• pp.47-52
• /
• 2003

A new type of Bi based glass frit was developed for Ag paste in PDP applications and its properties are compared with the commercially used Pb based glass frit. After optimization of the properties of Bi based frits for PDP application such as the softening temperature and the coefficient of thermal expansion (C.T.E), the screen printed electrodes prepared with the Bi based fit contained Ag paste were characterized. In $Bi_2O_3-B_2O_3-Al_2O_3$ glass system with the more than 50% of $Bi_2O_3$, the softening temperature, the thermal expansion coefficient and the line resistivity was 400∼$480^{\circ}C$, 7.31∼$10.02\times 10^{-6}/^{\circ}C$> and 4.1∼4.8$\Omega$ respectively. Properties of the Bi based frits are comparable with the Pb based frits. A printability and an uniformity of the Bi based frits were excellent in screen printed Ag eletrode. The Bi based frit system is an excellent candidate material for Pb free and Alkali free frit in PDP applications.