Journal of the Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회논문지)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지
DOI QR코드

DOI QR Code

Effect According to Additive (Bi0.5Na0.5)TiO3 in BT-BNT System

BT-BNT계에서 (Bi0.5Na0.5)TiO3 첨가에 따른 효과

  • 이미재 (요업기술원 전자부품소재본부) ;
  • 백종후 (요업기술원 전자부품소재본부) ;
  • 김세기 (요업기술원 전자부품소재본부) ;
  • 김빛남 (요업기술원 전자부품소재본부) ;
  • 이우영 ((주)하이엘 연구소) ;
  • 이경희 (명지대학교 신소재공학과)
  • Published : 2009.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

Lead free positive temperature coefficient of resistivity (PTCR) ceramics based on $BaTiO_3-(Bi_{0.5}Na_{0.5})TiO_3$ solid solution were prepared by a conventional solid state reaction method. The phase structure was showed single phase with perovskite structure regardless calcinations temperature and $Ba_{1-x}(Bi_{0.5}Na_{0.5})_xTiO_3$ structure was transformed from tetragonal to orthorhombic phase at $x{\geq}0.15$ mole. The XRD peaks with $45^{\circ}{\sim}46^{\circ}$ shifted in right the influence of crystal structure change and the intensity of peak was decreased with additive $(Bi_{0.5}Na_{0.5})TiO_3$. The curie temperature risen with additive $(Bi_{0.5}Na_{0.5})TiO_3$ but disappeared for $(Bi_{0.5}Na_{0.5})TiO_3$ addition more than 0.15 mole in TMA. In relative permittivity, the curie temperature by the transform of ferroelectric phase risen with additive $(Bi_{0.5}Na_{0.5})TiO_3$ but decreased in relative permittivity. Also, the peak of new curie temperature showed the sample containing $0.025{\sim}0.045$ mole of $(Bi_{0.5}Na_{0.5})TiO_3$ near $70^{\circ}C$ caused by phase transform from ferroelectric to ferroelectric and the peak of new curie temperature disappeared at 0.045 mole of $(Bi_{0.5}Na_{0.5})TiO_3$. In our study, it was found that the PTCR in $BaTiO_3-(Bi_{0.5}Na_{0.5})TiO_3$ system was possible for $0{\sim}0.025$ mole of $(Bi_{0.5}Na_{0.5})TiO_3$ and the maximum curie temperature by phase transition showed about at $145^{\circ}C$.

Keywords

References

  1. W. Huo and Y Qu, 'Effect of $Bi_{1/2}Na_{1/2}TiO_{3}$ on the curie temperature and the PTC effects of Ba$TiO_{3}$-based positive temperature coefficient ceramics', Sensor and Acturators A, Vol. 128, p. 265, 2006 https://doi.org/10.1016/j.sna.2006.01.022
  2. J. shieh, K. C. Wu, and C. S. Chen, 'Switching characteristics of MPB compositions of $(Bi_{0.5}Na_{0.5})TiO_{3}-BaTiO_{3}-(Bi_{0.5}K_{0.5})TiO_{3}$ lead- free ferroelectric ceramics', Act. Mater., Vol. 55, p. 3081, 2007 https://doi.org/10.1016/j.actamat.2007.01.012
  3. T. shimada, K. Touji, Y. Katsuyama, H. Takeda, and T. Shiosaki, 'Lead free PTCR ceramics and its electrical properties', J. Euro. Ceram. Soc., Vol. 27, p. 3877, 2007 https://doi.org/10.1016/j.jeurceramsoc.2007.02.171
  4. T. Takenaka, K. I. Maruyama, and K. Sakata, '$(Bi_{\frac{1}{2}}Na_{\frac{1}{2}})TiO_{3}-BaTiO_{3}$ system for lead-free piezoelectric ceramics', Japan. J. App. Phys., Vol. 30, No. 9B, p. 2236, 1991 https://doi.org/10.1143/JJAP.30.2236
  5. Y. Luo, X. Liu, X. Li, and J. Cheng, 'PTCR effect in $BaBi_{2}Nb_{2}O_{9}$-doped $BaTiO_{3}$ ceramics', J. Mater Sci ; Mater Electron, Vol. 18, p. 883, 2007
  6. Z. Yang, B. Liu, L. Wei, and Y. Hou, 'Structure and electrical properties of (1-x)$Bi_{0.5}Na_{0.5}TiO_{3}-xBi_{0.5}K_{0.5}TiO_{3}$ceramics near morphotropic phase boundary', Mat. Research Bull., Vol. 43, p. 81, 2008 https://doi.org/10.1016/j.materresbull.2007.02.016
  7. T. Takenaka and H. Nagata, 'Curent status and prospects of lead-free piezoelectric ceramics', J. Euro. Ceram. Soc., Vol. 25, p. 2693, 2005 https://doi.org/10.1016/j.jeurceramsoc.2005.03.125
  8. H. Takdea, W. Aoto, and T. Shiosaki, '$BaTiO_{3}-(Bi_{\frac{1}{2}}Na_{\frac{1}{2}})TiO_{3}$ solid-solution semiconducting ceramics with Tc> 130 ${^{\circ}C}$', Appl. Phys. Lett., Vol. 87, p. 102, 2005
  9. 김형욱, 김성철, 진병문, 안창원, 김일원, 김영혁, 이재신, '$Bi_{0.5}(Na_{1-x}K_{x})_{0.5}TiO_{3}$ 무연 세라믹의 유전 및 압전특성', 한국물리학회지, 53권, 1호, p. 56, 2006