• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.3
• /
• pp.1-8
• /
• 2008

Effects of annealing process in a reduction ambient on thermoelectric properties of the $(Bi,Sb)_{2}Te_3$ thin films prepared by thermal evaporation have been investigated. With annealing at $300^{\circ}C$ for 2 hrs in a reduction ambient(50% $H_2$+50% Ar), the crystallinity of the $(Bi,Sb)_{2}Te_3$ thin films were substantially improved with remarkable increase in the grain size. Seebeck coefficients of the $(Bi,Sb)_{2}Te_3$ thin films increased from$\sim90{\mu}V/K$ to $\sim180{\mu}V/K$ with annealing in the reduction ambient due to decrease in the hole concentration. Power factors of the $(Bi,Sb)_{2}Te_3$ thin films were remarkably improved for $5\sim16$ times with annealing in the reduction atmosphere. After annealing in the reduction ambient, a $(Bi,Sb)_{2}Te_3$ evaporated film exhibited a maximum power factor of $18.6\times10^{-4}W/K^{2}-m$.

• Korean Journal of Materials Research
• /
• v.12 no.12
• /
• pp.911-917
• /
• 2002

0.5 at% $Na_2$Te-doped ($Pb_{0.7}Sn_{0.3}$)Te and ($Bi_{0.2}Sb_{0.8}$)$_2$$Te_3$ powders were fabricated by mechanical alloying process. 0.5 at% Na$_2$Te-doped ($Pb_{0.7}Sn_{0.3}$)Te powders were charged at one end of mold and ($Bi_{0.2}Sb_{0.8}$)$_2$$Te_3$ powders were charged at the other end of a mold. Then these powders were hot-pressed to form p-type ($Pb_{0.7}Sn_{0.3}$)Te/($Bi_{0.2}Sb_{0.8}$)$_2$$Te_3$ functional gradient materials with the segment ratios (the ratio of ($Pb_{0.7}Sn_{0.3}$)Te to ($Bi_{0.2}Sb_{0.8}$)$_2$$Te_3$ ) of 1:2, 1:1, and 2:1. Power generation characteristics of the ($Pb_{0.7}Sn_{0.3}$)Te/($Bi_{0.2}Sb_{0.8}$)$_2$$Te_3$ were measured. When the temperature difference ΔT at both ends of the specimen was larger than $300^{\circ}C$, the ($Pb_{0.7}Sn_{0.3}$)Te/($Bi_{0.2}Sb_{0.8}$)$_2$$Te_3$ with the segment ratios of 1:2 and 1:1 exhibited larger output power than those of the ($Bi_{0.2}Sb_{0.8}$)$_2$$Te_3$ and 0.5 at% $Na_2$ Te-doped ($Pb_{0.7}Sn_{0.3}$)Te alloys. The maximum output power of the ($Pb_{0.7}Sn_{0.3}$)Te/($Bi_{0.2}Sb_{0.8}$)$_2$$Te_3$ predicted with the measured Seebeck coefficient and the estimated electrical resistivity was in good agreement with the measured maximum output power.

• Korean Journal of Materials Research
• /
• v.9 no.4
• /
• pp.349-354
• /
• 1999

The temperature dependences of the Hall coefficient, carrier mobility, electrical resistivity, Seebeck coefficient, thermal conductivity, and figure-of-merit of the undoped and $CdI_2$-doped 90% $Bi_2Te_3-10% Bi_2Se_3$, single crystals, grown by the Bridgman method, have been characterized at temperatures ranging from 77K to 600K. The saturated carrier concentration and degenerate temperature of the undoped 90% $Bi_2Te_3-10% Bi_2Se_3$ single crystal are $5.85\times10_{18}cm^{-3}$ and 127K, respectively. The scattering parameter of the 90% $Bi_2Te_3-10% Bi_2Se_3$ single crystal is determined to b -0.23, and the electron mobility to hole mobility ratio ($\mu_e/\mu_h)$ is 1.45. The bandgap energy at 0K of the 90% <$Bi_2Te_3-10% Bi_2Se_3$ single crystal is 0.200 eV. Adding $CdI_2$as a donor dopant, a maximum figure-of-merit of $3.2\times10^{-3}/K$$CdI_2$-doped specimen.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.190-190
• /
• 2013

여러 화합물 반도체 중 $Sb_2Te_3$, $Bi_2Te_3$, 그리고 $Bi_2Se_3$과 같은 $A_2B_3$형 화합물은 열전소자에 적용가능성이 좋아서 광범위하게 연구되고 있다. $A_2B_3$형 화합물 중 특히 $Bi_2Te_3$는 단독 또는 다른 원소와 합금하여 태양전지, 열전소자, 그리고 상-변환 소자 등으로 이용된다. $Bi_2Te_3$ 박막을 형성하는 여러 방법 중에 전기화학적인 전착법은 박막의 조성 및 두께 제어가 용이하고 비용적 측면이나 형성속도 측면에서도 타 방법에 비하여 유리하기 때문에 주목을 많이 받고 있다. 하지만 전기화학적인 전착법에 의해 얻어진 박막은 점 결함, 높은 내부에너지와 결정성이 낮다는 단점이 있다. 본 연구에서는 도금층의 결정성 향상을 위하여 계면 활성제인 CTAB를 첨가하여 $Bi_2Te_3$ 박막을 형성하였다. $Bi_2Te_3$ 박막에 미치는 계면 활성제의 영향을 알아보기 위하여 결정성 및 전기, 열전 특성을 분석하였다. 또한, 도금된 박막을 다양한 온도에서 열처리 하여 열처리가 $Bi_2Te_3$ 박막의 전기 및 열전 특성에 미치는 영향을 알아보았다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.741-742
• /
• 2011

XRD 결과와 TEM 분석으로부터 열처리효과에 따른 Bi-Te 박막의 미세구조 변화를 확인하였다. $Bi_2Te_3$ 상이 $SiO_2$ 와 Bi-Te 박막의 경계면을 따라서 성장하였고 이는 열전성능에 중요한 영향을 미치는 것을 확인하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.4
• /
• pp.363-369
• /
• 1994

Bimuth telluride base thermoelectrics are prepared by AC current applied hot pressing method. It is possible to minimize the defects arising from the vaporization of Te, thanks to the very short processing time compared to the single crystal growing method. The optimum conditions for the AC applied hot pressing of 95 mol% $Bi_2Te_3-5 mol% Bi_2Se_3$ thermoelectrics are sintering at $400^{\circ}C$, for 2 minutes, under 1500 kgf/$\textrm{cm}^2$, with the particle size of $125 to 250 {\mu}m$, range of powder. The resultant Z value (figure of merit) was $2.2{\times}10^{-3}/K$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.6
• /
• pp.502-507
• /
• 2010

In order to design nano structured materials with enhanced thermoelectric properties, the alloys in the pseudo-binary $Bi_2Te_3$-PbTe system are investigated for their micro structure properties. For this synthesis, the liquid alloys are cooled by the water quenching method. Micro structure images are obtained by using an electron probe micro analyzer(EPMA). Dendritic and lamellar structures are clearly observed with the variation in the composition ratio between $Bi_2Te_3$ and PbTe. The increase in the $Bi_2Te_3$ composition ratio causes to change of the structure from dendritic to lamellar. The Seebeck coefficient of sample 5, in which the mixture rate of $Bi_2Te_3$ is 83%, is measured as the highest value. In contrast, the others decrease with the increase of the $Bi_2Te_3$ composition ratio. Meanwhile, p-type characteristics are observed in sample 6, at 91%-$Bi_2Te_3$ mixture rate. The power factors of the all samples are calculated with the Seebeck coefficient and resistivity.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.4
• /
• pp.135-139
• /
• 2015

$Bi_2Te_3-Bi_2Se_3$ alloy which is typical n-type thermoelectric material were grown by traveling heater method (THM) technique. We investigate the effect of the composition of $100-x(Bi_2Te_3)-x(Bi_2Se_3)$ and doping of n-type dopants such as $SbI_3$ and $CdCl_2$. Maximum figure of merit of $Bi_2Te_3-Bi_2Se_3$ alloy was observed with $CdCl_2$ 0.1 wt% (Z: $2.73{\times}10^{-3}/K$) and $SbI_3$ 0.05 wt% (Z: $2.29{\times}10^{-3}/K$). Deviation along the length of $Bi_2Te_3-Bi_2Se_3$ ingot grown by THM method is low, which indicates that the ingot is very homogenized. Also we observed the close relationship of between anisotropy ratio and dopant in the $90(Bi_2Te_3)-10(Bi_2Se_3)$ alloys. And we confirmed the fact that anisotropy ratio exerts thermoelectric performance in $Bi_2Te_3$ based n-type thermoelectric material.

• Korean Journal of Materials Research
• /
• v.5 no.2
• /
• pp.251-258
• /
• 1995

In an effort to increase the thermoelectric figure of merit by reducing the thermal conductivity, the unidirectionally solidified n-type (Bi, Pb)-Te based alloys which form a $Bi_{2}Te_{3}-PbBi_{4}Te_{7}$eutectic lamellar structure were investigated with the microstructural control at various solidification conditions. PbBi_{4}Te_{7}$ lamellae were grown on cleavage plane(0001) of $Bi_{2}Te_{3}$ and the interlamellar spacing decreased from 10.4 $\mu \textrm{m}$to 3.2$\mu \textrm{m}$ with growth velocity variation from 1.4 \times 10^{-4}$cm/sec to $8.3 \times 10^{-4}$cm/sec. Seebeck coefficient was constant, $\mid$$\alpha$$\mid$=29 $\mu$ V/K regardless of growth direction, growth velocity and temperature gradient. Electrical conductivity showed a tendency to decrease slightly with growth velocity and it parallel to growth direction was about three times as large as perpendicular direction. The figures of merit were varied differently from Seebeck coefficients and electrical conductivities depending on the growth direction, growth velocity and temperature gradients. They showed the relative increase in case of perpendicular direction compared with parallel to growth direction. It is believed to be due to the reduction of the thermal conductivity according to decrease of the interlamellar spacing.

• Journal of Surface Science and Engineering
• /
• v.50 no.2
• /
• pp.114-118
• /
• 2017

Bismuth telluride ($Bi_2Te_3$) and its alloys are well-known thermoelectric materials for ambient temperature applications. In this study, the dissolved Bi-Te precursor solution was used to synthesis metallic $Bi_2Te_3$ powder via ultrasonic spray pyrolysis and reduction process. The droplets of the Bi-Te precursor solution were decomposed to Bi-Te oxide powders by ultrasonic spray pyrolysis. The spherical $Bi_2Te_3$ powders were synthesized by reduction reaction in atmosphere of hydrogen gas at the temperature above $375^{\circ}C$ for 6h. The reduced $Bi_2Te_3$ powders have a mean particle size of $1.5{\mu}m$. The crystal structure of the powder was evaluated by X-Ray diffraction(XRD), and the microstructure with size and shape powders was observed by fieldemission scanning electron microscope(FE-SEM) and transmission electron microscope(TEM).