• Korean Journal of Materials Research
• /
• 제6권5호
• /
• pp.449-456
• /
• 1996

BaO, SrCI2.6H2O 그리고 Ti(OPri)4를 출발 원료로 사용하여 균일한 BaxSr1-xTiO3(BST) 솔을 합성하였고, BST 박막을 회전 코팅 법으로 Si 및 Pt/Ti/SiO2/Si 기판위에 제조하였다. 적외선 및 NMR 스펙트럼 분석으로 킬레이션 조제로 사용한 acetylacetone(AcAc)이 엔올 형태로 Ti-알콕사이드와 결합하여 솔 안정화에 기여함을 확인하였다. Xedrogel에 대한 DT/TGA 및 적외선 스펙트럼 결과로부터 페로브스카이트 상생성이 $600^{\circ}C$ 이상에서 이루어짐을 관찰하였다. $700^{\circ}C$에서 열처리한 박마은 -300(10 KHz)의 상대유전율을 나타내었고, 결정립의 저항 및 입계의 병렬 RC 성분으로 등가회로를 구성할 수 있었다.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• 제43권7호
• /
• pp.1144-1151
• /
• 1994

The humidity-sensitive specimens-(BaS11T-S1xTCaS1xT)TiOS13T, x=0, 0.1, 0.2, 0.3, 0.4, 0.5-were fabricated by a solid-state reaction method which is easy in process control of microstructure and good in mass production, and their humidity-sensitive characteristics were examined. Ca inhibits grain growth and the open porosity increases with Ca substitution, and the specimens at x=0.5 show the best humidity sensitivity. Their humidity sensitivity is higher at the lower frequencies, and drift phenomenon in humidity sensitivity is exhibted with aging in the air, which disappears by a heat treatment. The electrical conduction with water adsorption is dominated by the ions, and the activation energy decreases with increasing relative humidity.

• Journal of the Microelectronics and Packaging Society
• /
• 제1권2호
• /
• pp.105-112
• /
• 1994

BaTiO3 의 B-site에 0-0.03 몰 범위의 NiO를 첨가한 Ba1-xSrxTi1-y-wNiyZrwO3-y 유전 체에서 NiO 첨가가 유전특성 및 절연저항의 내환원성에 미치는 영향을 조사하였다. B-site Ni 치환에 의해 a 축의 격자상수는 증가하고 c 축의 격자상수는 감소하여 정방성 c/a가 감 소하였으며 단위격자의 부피는 증가하였다. NiO 첨가에 따라 큐리온도는 저온으로 이동하 였으며 큐리온도의 변화율은 소결분위기에 영향을 받았다. NiO가 첨가되지 않은 조성에서 는 산소분압 109 MPa의 환원분위기 소성에 의해 비정항이 107$\Omega$.cm로 저하되었으나 0.01 몰이상의 NiO를 첨가한 조성에서는 공기중 소결시 얻을수 있었던 1011$\Omega$.cm로 저하되었으 나 0.01 몰 이상의 NiO를 첨가한 조성에서는 공기중 소결시 얻을 수 있었던 1011$\Omega$.cm 이 상의 비저항을 유지하였다.

• Journal of the Korean Magnetics Society
• /
• 제13권1호
• /
• pp.21-28
• /
• 2003

M-type hexagonal BaF $e_{12-2x}$ $Co_{x}$ $Ti_{x}$ $O_{19}$ (0$\leq$x$\leq$1.0) ferrite powders prepared by a sol-gel method. The crystallographic and magnetic properties were characterized with a x-ray diffraction (XRD), thermogravimetry (TG), differential thermal analysis (DIA), Fourier transform infrared spectroscopy (FT-IR), vibrating sample magnetometer (VSM), and Mossbauer spectroscopy. The result of XRD measurements show that the a and c lattice parameters increase with increasing x from $\alpha$=5.882 and c=23.215 $\AA$ for $\chi$=0.0, to $\alpha$=5.895 and c=23.295 $\AA$ for $\chi$=1.0. From the Mossbauer results, the $Co^{2+}$- $Ti^{4+}$ site occupancies have been affected the changes in the magnetization and in the coercivity. The Curie temperature linearly decreases with increasing $Co^{2+}$- $Ti^{4+}$ concentration x.

• Journal of the Korean Ceramic Society
• /
• 제48권4호
• /
• pp.323-327
• /
• 2011

The effects of $Dy_2O_3$ and $Er_2O_3$ co-doping on electrical properties and temperature stability of barium titanate ($BaTiO_3$) ceramics were investigated in terms of microstructure and structural analysis. The dielectric constant and the insulation resistance (IR) of 0.7 mol% $Dy_2O_3$ and 0.3 mol% $Er_2O_3$ co-doped dielectrics had about 60% and 20% higher than the values of undoped one, respectively, and the temperature coefficient of capacitance (TCC) met the X7R specification. The addition of $Dy_2O_3$ contributed to electrical properties caused by increase of tetragonality; however, preferential diffusion of $Dy^{3+}$ ions toward A site in $BaTiO_3$ grain exhibited an adverse effect on temperature stability by grain growth. On the other hand, The $Er_2O_3$ addition in $BaTiO_3$ could affect the TCC behavior and the IR with suppression of grain growth caused by reinforcement of grain boundary and electrical compensation. Therefore, the enhanced electrical properties and temperature stability through the co-doping could be deduced from the increase of tetragonality and the suppression of grain growth.

• Journal of the Korean Ceramic Society
• /
• 제43권9호
• /
• pp.569-574
• /
• 2006

Transparent glass-ceramics containing fresnoite crystals have been prepared by controlled heat treatment in $K_2O-BaO-TiO_2-SiO_2$ and their nonlinear optical and luminescent properties were investigated using Maker fringe method and Spectrofluorometer. The second harmonic generation was observed in all samples and the values decreased with increasing $K_2O$ content. The luminescence of blue light at ${\sim}482nm$ could be observed and it was shown that the luminescent property was controlled by the $K_2O$ content.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.190-192
• /
• 1994

Microwave dielectric properties of $0.15(Ba_xSr_{0.05})O-0.15(Sm_{2(1-y)}Nd_{2y})O_3-0.7TiO_2$ ($x=0.9{\sim}1.0[mol.]$, y=6[m/0]) and $0.15(Ba_{0.95}Sr_{0.05})O-0.15(Sm_{2(1-y)}Nd_{2y})O_3-zTiO_2$(y=6[m/o], $z=0.66{\sim}0.7[mol.]$) ceramics were investigated with the contents of BaO and $TiO_2$. In the specimen with contents of BaO (0.975[mol.]), dielectric constant, quality factor and temperature coefficient of resonant frequency have good values of 76.52, 3001(at 3[GHz]), +0.71[ppm/$^{\circ}C$], respectively. In the specimen with contents of $TiO_2$(0.69[mol.]), dielectric constant, quality factor and temperature coefficient of resonant frequency showed the maximum values of 80.89, 3057(at 3[GHz]), +26.12[ppm/$^{\circ}C$], respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 1989년도 춘계학술대회 논문집
• /
• pp.70-73
• /
• 1989

(1-x-y)Pb($Zn_{1/3}Nb_{2/3})O_3-Ba(Zn_{1/3}Nb_{2/3})O_3-PbTiO_3(0.12{\leq}x{\leq}0.21, 0.24{\leq}y{\leq}0.33$) ternary compound ceramics were fabricated by the mixed oxide method. The sintering temperature and time were 1050 [$^{\circ}C$], 2[hr]. Morphotropic phase boundary region was chosen for the composition. 0.55 PZN-0.21 BZN-0.24 PT specimen had the highest value of relative dielectric constants, 5353. The curie temperature of specimens were increased linearly with PT content. Near the morphotropic phase boundary, electro-mechanical coupoling factor and mechanical quality factor of the specimens had the highest values.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1386-1393
• /
• 2018

The solubility of $TiO_2$ in $NaF-CaF_2-BaF_2$ ternary eutectic melts was investigated at the temperature range of $1025-1150^{\circ}C$. The least-squares equation was obtained from the relationship between the reciprocal temperature and the natural logarithm of the titanium concentration in the melts saturated with $TiO_2$. The corresponding partial molar enthalpy of dissolution of $TiO_2$ was found to be 188 kJ/mol. The titanium saturation concentration was 3.73 wt% at $1100^{\circ}C$. From the titanium concentration change with the added amount of $TiO_2$ at different holding time after a final stirring, it was found that not only complete dissolution of $TiO_2$ but also enough sedimentation of excessive $TiO_2$ should be guaranteed to obtain more reliable solubility data. The holding time of 10 h was found to be enough for the excessive $TiO_2$ particles to settle down in our experimental conditions. It is noteworthy that in case of adding $TiO_2$ in excess of its solubility, the $Ba_{1.12}(Ti_8O_{16})$ phase was observed at the lower and bottom of the solidified salt ingots.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• 제49권5호
• /
• pp.265-269
• /
• 2000

$(Ba, Sr)TiO_3$thin films were etched with a magnetically enhanced inductively coupled plasma (MEICP) at different CF4/Ar gas mixing ratios. Experimental was done by varying the etching parameters such as rf power, dc bias and chamber pressure. The maximum etch rate of the BST films was $1800{AA}/min$ under $CF_4/(CF_4+Ar)$ of 0.1, 600 W/350 V and 5 mTorr. The selectivity of BST to Pt and PR was 0.6, 0.7, respectively. X-ray photoelectron spectroscopy (XPS) results show that surface reaction between Ba, Sr, Ti and C, F radicals occurs during the (Ba, Sr)TiO3 etching. To analyze the composition of surface residue after the etching, films etched with different CF_4/Ar$ gas mixing ratio were investigated using XPS and secondary ion mass spectroscopy (SIMS).