• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.374-377
• /
• 2003

Sol-gel processing of BaTiO$_3$ ceramics doped with La(0.01-1.00 at.%) were prepared from metal barium, titanium n-butoxide and lanthanum isopropoxide. Characterization of the sol-gel-derived powder using XRD, SEM is also reported. The obtained results suggested that insulator to semiconductor transition for highly donor-doped barium titanate was closely related to the incorporation of donor into the grains and to the resultant grain size, which were significantly affected by the sinterability of BaTiO$_3$ powders and sintering conditions used.

• Journal of the Korean Ceramic Society
• /
• v.28 no.2
• /
• pp.101-108
• /
• 1991

0.2 mo1% La doped BaTiO3 samples were prepared by a wet chemical process (Pechini process) and electrical conductivity were measured from annealing temperatures(800-110$0^{\circ}C$) to room temperature continuously. 2 probe I-V characteristics showed that Pt electrodes were non-ohmic below about 80$0^{\circ}C$ for Ladoped sample. I-V curves showed varistor behavior and breakdown voltages showed PTC-like behavior. AC complex impedance of 0.2 La and 0.05 Mn mo1% doped BaTiO3 samples with three different electrodes (electroless Ni, Pt, Ag electrodes) were measured with temperature variation. Complex impedance plots showed that the samples with electroless Ni electrodes have negligible electrode resistance. Samples with Ag or Pt paste electrodes showed large electrode resistance. PTC effect, which is defined as the ratio of maximum resistance to minimum resistance, was found to be less than 10 for 0.2 mo1% La doped dense sample however greater than 105 with codoping of 0.05 mo1% Mn and 0.2 mol% La.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.410-413
• /
• 1988

In this paper, the real-time optical associative memory using multiple hologram which is generated with two angular multiplexed reference beams and Fourier transformed object beam in the $BaTiO_{3}$ crystal based on DFWM mechanism. When one image is recorded in the $BaTiO_{3}$ crystal, complete image can be recalled by 9 % partial input of the stored original image without any additional thresholding and optical feedback process. As an experimental result of multiple Fourier hologram which is recorded with two binary images, OHCHAS and PARKHK, we can obtain complete image recalled by 1/6 partial input of the stored image.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1573-1576
• /
• 1997

Thin films of $BaTiO_3$ system were prepared by radio frequency (rf)/dc magnetron sputtering method. We have investigated crystal structure, surface morphology and PTCR(positive-temperature coefficient of resistance) characteristics of the specimen depending on second heat - treatment temperatures. Scanning electron microscope(SEM) image of $BaTiO_3$ thin films shows that the specimen heat treated in between 900 and 1100[$^{\circ}C$] shows a grain growth. At 1100[$^{\circ}C$], the specimen stops grain-growing and becomes a crystal. A resistivity-temperature characteristics of the specimen depends on the doping concentrations of Mn.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.252-253
• /
• 2003

광굴절 물질은 광학적 위상공액 및 신호처리, 홀로그램 기록소자 및 광정보처리를 포함한 다양한 분야에 응용되고 있다. 또한 광굴절 결정의 광굴절 특성도 실험 및 이론적으로 활발하게 연구되고 있다. 그리고 본 연구에서 사용한 BaTiO$_3$ 결정은 외부에서 인가하는 전기장 없이도 매우 높은 전기광학계수(electrooptic coefficient)를 가지고 있어서 다양한 응용이 기대되는 광굴절 매질이다. 광굴절 결합계수를 측정하게 될 때, BaTiO$_3$ 결정에서의 두 빔의 결합에 대한 이득(gain)의 변화는 물질의 외부적인 특성, 즉 전기광학 텐서와 트랩의 농도 등에 의존할 뿐만 아니라, 외부적으로 조정될 수 있는 변수들, 예를 들면 매질에 입사되는 두 빔사이의 각도, 매질의 광축과 격자벡터 사이의 각도, 그리고 입사된 두 빔의 세기의 비 등에 의존하게 된다. (중략)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.323-323
• /
• 2008

Hydro-thermal 방법으로 만들어진 200nm, 300nm, 400nm, 500nm의 $BaTiO_3$를 800 ~ $1100^{\circ}C$ 범위에서 하소하여 하소온도에 따른 결정 구조, 비표면적, 입경의 크기를 조사하였다. 고유전율이면서 안정적 전기적 특성을 가지는 하이브리드 복합체를 만들기 위하여 에폭시와 경화제에 분말의 크기와 하소 온도를 달리한 $BaTiO_3$를 혼합하여 전기적 특성을 조사하였다. 연구 결과 분말의 크기에 의한 영향보다는 하소온도에 따른 영향이 크게 나타남을 볼 수 있었다. 이와 같은 결과는 하소 온도가 증가할 수록 유전체 분말의 응집이 많이 발생하고 이를 에폭시와 혼합시 유전체 함량에 의한 영향보다는 체적비 영향을 크게 받아 나타난 결과로 예상된다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.10a
• /
• pp.58-60
• /
• 1988

The dielectric properties of glass ceramics with BaTiO$_3$ crystallites are described. In this study measurements were made over the frequency range 1kHz-10MHz and temperature range $25^{\circ}C$-15$0^{\circ}C$. There are several minor constituents in the glass which needed to obtain the desired properties. The fluorine ion substitutes for oxygen in glass-crystallized BaTiO$_3$. And additions of Mg ion is used to shift the Curie temperature. We show the addition of Mg ion lowers the Curie point to about 323。K.

• Journal of the Korean Ceramic Society
• /
• v.35 no.11
• /
• pp.1197-1202
• /
• 1998

To check the possibility for microwave sintering of MLCC(multi layer ceramic capacitor) the tape cast-ed BaTiO3 thick films in zirconia insulation box were sintered by the domestic microwave oven. Microwave sintered samples had higher density lower porosity than coventionally sintered ones. but they didn't show Z5U electrical properties due to short sintering time about 15 minutes.

• Journal of the Korean Ceramic Society
• /
• v.43 no.11 s.294
• /
• pp.673-679
• /
• 2006

The discovery of ferroelectric barium titanate (BaTiO$_3$) in 1942 began the present era of dielectrics-based electronic ceramics. Ferroelectric barium titanate has a high dielectric constant and after the recognition of BaTiO$_3$ as a new ferroelectric compound, various attractive electrical properties have been extensively studied and reported. Since then, pioneering work on valence-compensated semiconduction led to the discovery of the positive temperature coefficient (PTC) of the resistance effect found in doped BaTiO$_3$. Significant progress has since followed with respect to understanding the PTC phenomena, advancing materials capabilities, and developing devices for sensor and switching applications. In this paper, the theoretical aspects of the various PTC models are discussed and the future trends of practical applications for PTC devices are briefly mentioned.

• Journal of information and communication convergence engineering
• /
• v.1 no.1
• /
• pp.31-34
• /
• 2003

Sol-gel processing of $BaTiO_{3}$ ceramics doped with La (0.01∼1.00 at.%) were prepared from metal barium, titanium n-butoxide and lanthanum isopropoxide. Characterization of the sol-gel-derived powder using XRD, SEM is also reported. The obtained results suggested that insulator to semiconductor transition for highly donor-doped barium titanate was closely related to the incorporation of donor into the grains and to the resultant grain size, which were significantly affected by the sinterability of $BaTiO_{3}$ powders and sintering conditions used.