• 한국전기전자재료학회논문지
• /
• 제30권1호
• /
• pp.13-16
• /
• 2017

In this study, in order to develop composition ceramics for refrigeration device application, $Ba(Ti_{0.9}Zr_{0.1})O_3$ composition was fabricated using conventional solid-state method. Electrocaloric effect of this ceramic was investigated using the characteristics of P-E hysteresis loops at wide temperature range from room temperature to $150^{\circ}C$. Curie temperature of $Ba(Ti_{0.9}Zr_{0.1})O_3$ ceramics showed $80^{\circ}C$. The maximum value of ${\Delta}T=0.12^{\circ}C$ in ambient temperature of $115^{\circ}C$ under 30 kV/cm was appeared. It is concluded that $Ba(Ti_{0.9}Zr_{0.1})O_3$ ceramics can be applied as refrigeration device application.

• 한국세라믹학회지
• /
• 제30권12호
• /
• pp.1023-1028
• /
• 1993

To obtain a single phase of Ba2Ti9O20 at lower temperature than previious other researches. We investigated the effect of Zr substitution for predetermined portions of Ti in Ba2Ti9O20. In this study, the four compounds(x=0, 0.028, 0.048, 0.068) of Ba2(Ti1-xZrx)9O20 were prepared by coprecipitation reaction of BaCl2, TiCl4 and ZrOCl2 with (NH4)2CO3 and NH4OH as the coprecipitating agents and pH regulators, in queous solution. Owing to 4.8 mol% addition, the single phase of Ba2Ti9O20 showing high Q was obtained at 115$0^{\circ}C$ which is lower by 25$0^{\circ}C$ than the temperature in case of mechanical mixtures of BaCO3 and TiO2.

• 대한전기학회논문지
• /
• 제44권5호
• /
• pp.644-648
• /
• 1995

Transparent xBa(La$_{1}$2/Nb$_{1}$2/)O$_{3}$-(1-x)Pb(Zr, Ti)O$_{3}$ (x=8.5, 9.0[mol.%], Zr/Ti=70/30~40/60) ceramics were fabricated by the two-stage sintering method, the electrooptic properties were investigated with Ba(La$_{1}$2/Nb$_{1}$2/)O$_{3}$ content and Zr/Ti composition ratio. Decreasing the Zr/Ti ratio, the electrooptic property was changed from a quadratic electrooptic effect to a linear electrooptic effcet. In the BLN-PZT 9.0/50/50 specimen having the tetragonal structure, the linear electrooptic coefficient had the highest value of 6.01*10$^{-10}$ [m/V] and in the BLN-PZT 9.0/55/45 specimen which located near the MPB region, the quadratic electrooptic coefficient had the highest value of 10.53*10$^{-16}$ [m$^{2}$/V$^{2}$].

• 한국세라믹학회지
• /
• 제30권5호
• /
• pp.397-403
• /
• 1993

Widely used dielectrics, barium titanate was promising material for ceramic capacitor. It was produced by specific formulation with various dopants-La2O3, ZrO2, SnO2, CaZrO3, CaTiO3, CaSnO3, Bi2O3, and etc.-according to demanded properties of capacitor. In this study, we would examinate the study of dielectric properties and temperatuer characteristics (T.C.) with the amount of Bi2O3. The sample was prepared with [BaTiO3]10＋[BaZrO3, SnO2, La2O3, ZrO2]10 and Bi2O3 varied from 1.0, 1.5, 2.0, 2.5 to 3.0wt%. After milling and mixing for 15hrs, each sample was dried and then pressed at 700kg/$\textrm{cm}^2$ into pellets. Pellets were fired at 131$0^{\circ}C$, for 3hrs in air. As the result of measurements, dielectric constant, break down voltage, and insulation resistance were increased with the amount of Bi2O3, and the resonant frequency was shifted from high frequency to low frequency range. In the case of temperature characteristics, capacitance change rate was symmetrically changed at -$25^{\circ}C$ and ＋85$^{\circ}C$ respectively. Therefore, it is recognized that the temperature characteristics can be moderated with doping Bi2O3 in our study.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
• /
• pp.75-78
• /
• 2002

The dielectric properties for Ni electrode multilayer ceramic chip capacitor for Y5V has been studied with $(Ba_{0.93}Ca_{0.07})_m(Ti_{0.82}Zr_{0.18})O_2+MnO_2$ 0.2wt%, $Y_2O_3$ 0.18wt%, $SiO_2$ 0.15wt%, glass frit 1 wt% composition. The m ratio in the range of 1.006 ~ 1.012 have dielectric constant 9,500 ~ 14,500 and insulation resistance 390 ~ 460 $G{\Omega}$. Using the dielectrics, nikel electrode multilayer chip capacitor with Y5V, 104Z in EIA 0603 size specific capacitance were developed.

• 한국전기전자재료학회논문지
• /
• 제26권9호
• /
• pp.651-655
• /
• 2013

$(Ba_{0.85}Ca_{0.15})(Ti_{0.9}Zr_{0.1})O_3$ + 0.04 wt% $CeO_2$ lead-free ceramics were synthesized by conventional sintering process and the effect of calcination temperature on microstructure, dielectric and piezoelectric properties were investigated. Improved piezoelectric properties have been observed at $1,125^{\circ}C$ calcination temperature which show the optimal electrical properties, $k_p$~0.457, $d_{33}$~367 pC/N, $Q_m$~158 and $T_c$~$85^{\circ}C$. These results show that the piezoelectric properties can be improved by appropriate calcination temperature.

• 한국전기전자재료학회논문지
• /
• 제27권1호
• /
• pp.22-26
• /
• 2014

$(Ba_{0.85}Ca_{0.15})(Ti_{0.9}Zr_{0.1})O_3$ + 0.04 wt% $CeO_2$ lead-free ceramics were prepared by conventional oxide-mixed method and the effect of sintering temperature on microstructure, dielectric and piezoelectric properties were investigated. Improved piezoelectric properties have been observed at $1,400^{\circ}C$ sintering temperature which show the optimal electrical properties, $k_p{\sim}0.412$, $d_{33}{\sim}316pC/N$, $Q_m{\sim}144$, ${\varepsilon}_r{\sim}3,345$ and $T_c{\sim}85^{\circ}C$. These results show that the sintering temperature plays an important role in piezoelectric properties.

• 한국전기전자재료학회논문지
• /
• 제28권7호
• /
• pp.424-427
• /
• 2015

In this study, in order to develop the capacitor composition ceramics with the good dielectric properties, $(Ba_{0.86}Ca_{0.14})(Ti_{0.85}Zr_{0.12}Sn_{0.03})O_3+xCuO$ (x= 0.006~0.010) ceramics were prepared by the conventional solid-state reaction method. The effects of CuO addition on the microstructure and dielectric properties was investigated. All specimens indicated rhombohedral phase without any secondary phase. As CuO addition increased, the variation width of TCC was increased at more than $40^{\circ}C$. Also, the specimen with x=0.007 sintered at $1,250^{\circ}C$ showed the high dielectric constant of 9,632 in spite of low temperature sintering temperature.

• 한국재료학회지
• /
• 제33권11호
• /
• pp.465-474
• /
• 2023

The effects of La³⁺ substitution for Sr²⁺-site on the crystal structure and the dielectric properties of (Ba_0.7Sr_0.3-3x/2La_x) (Ti_0.9Zr_0.1)O₃ (BSLTZ) (0.005 ≤ x ≤ 0.02) ceramics were investigated. The structural characteristics of the BSLTZ ceramics were quantitatively evaluated using the Rietveld refinement method from X-ray diffraction (XRD) data. For the specimens sintered at 1,550 ℃ for 6 h, a single phase with a perovskite structure and homogeneous microstructure were observed for the entire range of compositions. With increasing La³⁺ substitution (x), the unit cell volume decreased because the ionic size of La³⁺ (1.36 Å) ions is smaller than that of Sr²⁺ (1.44 Å) ions. With increasing La³⁺ substitution (x), the tetragonal phase fraction increased due to the A-site cation size mismatch effect. Dielectric constant (ε_r) increased with the La³⁺ substitution (x) due to the increase in tetragonality (c/a) and the average B-site bond valence of the ABO₃ perovskite. The BSLTZ ceramics showed a higher dielectric loss due to the smaller grain size than that of (Ba_0.7Sr_0.3)(Ti_0.9Zr_0.1)O₃ ceramics. BSLTZ (x = 0.02) ceramics met the X7R specification proposed by the Electronic Industries Association (EIA).

• 한국세라믹학회지
• /
• 제50권2호
• /
• pp.157-162
• /
• 2013

The need for lead-free piezoceramics has caused a renewal of interest in $BaTiO_3$-based systems. Recently, it was found that ceramics in the $(Ba,Ca)(Zr,Ti)O_3$ system have properties comparable to those of $Pb(Zr,Ti)O_3$. However, these ceramics require rather high sintering temperatures of $1450-1550^{\circ}C$. In this work, the effect of $TiO_2$ and CuO addition on the sintering behavior, microstructure, dielectric and piezoelectric properties of $(Ba_{0.85}Ca_{0.15})(Zr_{0.1}Ti_{0.9})O_3$ (BCTZ) ceramics will be discussed. BCTZ ceramics were prepared by the mixed oxide route and 1 mol % of $TiO_2$ or CuO was added. Undoped and doped ceramics were sintered at $1350^{\circ}C$ for 1-5 h. CuO was found to be a very effective sintering aid, with samples sintered for 1 h at $1350^{\circ}C$ having a bulk density of 95% theoretical density; however the piezoelectric properties were greatly reduced, probably due to the small grain size.