• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.1
• /
• pp.10-19
• /
• 1986

This is the last part of the four-part describing the development of a packet-switched computer communication network named the KORNET. In this paper we describe the design and implementation of the packet assembler/dissassembler (PAD) protocol for the asynchronous channel service, and of the network management softwares. The line processing module-B(LPMB) system supporting the asynchronous line includes a PAD protocol, a packet mode DTE/DCE protocol converting to the X.25 protocol, and the asynchronous receiver/transmitter(ART) software. The network management software is operated in master central processing module(MCPM) which includes virtual circuit management (VCM) managing the user channel, the routing management and the high level protocol for communication between the network management center (NMC) and the network node processor(NNP). In this paper, the design, implementation and operation of the softwares for the above service functions will be described in detail.

• Journal of Korea Soil Environment Society
• /
• v.4 no.1
• /
• pp.109-118
• /
• 1999

Recently, transport parameters of conservative solutes such as KCl in a porous medium have been successfully determined using time domain reflectometry (TDR) . This study was initiated to Investigate the applicability of TDR technique to monitoring the fate of a heavy metal ion in a sandy soil and the distribution of its concentration along travel distance with time. A column test was conducted in a laboratory that consists of monitoring both resident and flux concentrations of $ZnCl_2$in a sandy soil under a breakthrough condition. A tracer of $ZnCl_2$(10 g/L) was injected onto the top surface of the sample as pulse type as soon as a steady-state condition was achieved. Time-series measurements of resistance and electrical conductivity were performed at 10 cm and 20 cm of distances from the inlet boundary by horizontal-positioning of parallel TDR metallic rods and using an EC-meter for the effluent exiting the bottom boundary respectively. In addition. Zn ions of the effluent were analyzed by ICP-AES. Since the mode and position of concentration detected by TDR and effluent were different, comparison between ICP analysis and TDR-detected concentration was made by predicting flux concentration using CDE model accommodating a decay constant with the transport parameters obtained from the resident concentrations. The experimental results showed that the resident concentration resulted in earlier and higher peak than the flux concentration obtained by EC-meter, implying the homogeneity of the packed sandy soil. A close agreement was found between the predicted from the transport parameters obtained by TDR and the measured $ZnCl_2$concentration. This indicates that TDR technique can also be applied to monitoring heavy metal concentrations in the soil once that a decay constant is obtained for a given soil.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.2
• /
• pp.149-160
• /
• 2013

The objective of present study was to simultaneously isolate of isoflavone and soyasaponin compounds from the germ of soybean seeds. Soy germ flours were defatted with hexane for 48h at room temperature, and methanolic extracts were prepared using reflux apparatus at $90^{\circ}C$ for 6h, two times. After extraction, extracts were separated with preparative RP-$C_{18}$ packing column ($125{\AA}$, $55-105{\mu}m$, $40{\times}150mm$), and collected 52 fractions were identified with TLC plate (Kieselgel 60 F-254) and HPLC, respectively. Among the identified isoflavone and soyasaponin fractions, isoflavone fractions were re-separated using a recycling HPLC with gel permeation column (Jaigel-W252, $20{\times}500mm$). Final fractions were air-dried, and the purified compounds of two isoflavones (ISF-1-1, ISF-1-2) and four soyasaponins (SAP-1, SAP-2, SAP-3, SAP-4) were obtained. Two isoflavone compounds (ISF-1-1, ISF-1-2) were acid-hydrolyzed for the identification of their aglycones, and confirmed by comparing with 12 types of isoflavone isomers. While the four kinds of soyasaponins were identified by using a micro Q-TOF mass spectrometer in the ESI positive mode with capillary voltage of 4.5kV, and dry temperature of $200^{\circ}C$. Base on the obtained results, it was conclude that ISF-1-1 is the mixture isomers of daidzin (43.4%), glycitin (47.0%), and genistin (9.6%), but ISF-1-2 is the single compound of genistin (99.8% <). On the other hand, soyasaponin SAP-1 is the mixture compounds of soyasaponin A-group (Aa, Ab, Ac, Ae, Af); SAP-2 is soyasaponin B-group (Ba, Bb, Bc) and E-group (Bd, Be); SAP-3 is soyasaponin B-group (Ba, Bb, Bc), E-group (Bd, Be), and DDMP-group (${\beta}g$); SAP-4 is soyasaponin B-group (Ba, Bb, Bc), E-group (Bd, Be), and DDMP-group (${\beta}g$, ${\beta}a$), respectively.

• Economic and Environmental Geology
• /
• v.47 no.4
• /
• pp.351-362
• /
• 2014

In order to grasp the geological characteristics, the occurrence mode of ore body and development potential of Bophi Vum chromite mineralized zone in northwestern Myanmar, Korea Institute of Geoscience and Mineral Resources(KIGAM) and Department of Geological Survey and Mineral Exploration(DGSE) carried out joint exploration targeting on the $6km^2$ areas within the mineralized zone. Chromitites occur as a major Cr-ore body in the Bophi Vum area, and are enveloped by dunitic peridotites. As a result of geological survey, the geological map of Bophi Vum was drawn in the scale of 1:1,000, and we discovered that the chromitite ores are mainly distributed at the elevation range between 200 and 400 m. The soil geochemistry was conducted by collecting total 114 soil samples in the interval of 50 m after pitting ground surface under 0.7-1 m. Geochemical anomaly maps of Cr, Ni, Fe, and Mn were prepared by ICP-AES.

• Cartoon and Animation Studies
• /
• s.19
• /
• pp.113-126
• /
• 2010

The digital cartoons market is looking for a new growth momentum as the radical increases of the demands and markets about the mobile contents with portable instrument popularization. The conventional digital cartoons markets which are based on web-toon, page viewer cartoons and e-paper cartoons have been studied various fields to overcome some limitations such as the traditional cartoons had. The mobile cartoons which have been changed more and more, have some canvas limitations due to the mobile screen size. These limitations lead to the communication problems between the cartoonists and the subscribers and resulting some obstacles of mobile cartoons activations. In this paper, we developed a authoring tool applied the Screen Flow method to overcome inefficiency of conventional authoring methods. This proposed method can reflect the cartoonists' during the process of authoring mobile cartoons, thereafter we studied about the authoring method of mobile cartoons and its effects. For the convenience of users creating and distributing content in a way has been studied.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.4
• /
• pp.479-484
• /
• 2013

PURPOSE. The aim of this study was to evaluate the effects of additional acid etching and curing mechanism (light-curing or self-curing) of a composite resin on the dentin bond strength and compatibility of one-step self-etching adhesives. MATERIALS AND METHODS. Sixteen human permanent molars were randomly divided into eight groups according to the adhesives used (All-Bond Universal: ABU, Clearfil S3 Bond: CS3), additional acid etching (additional acid etching performed: EO, no additional acid etching performed: EX), and composite resins (Filtek Z-250: Z250, Clearfil FII New Bond: CFNB). Group 1: ABU-EO-Z250, Group 2: ABU-EO-CFNB, Group 3: ABU-EX-Z250, Group 4: ABU-EX-CFNB, Group 5: CS3-EO-Z250, Group 6: CS3-EO-CFNB, Group 7: CS3-EX-Z250, Group 8: CS3-EX-CFNB. After bonding procedures, composite resins were built up on dentin surfaces. After 24-hour water storage, the teeth were sectioned to make 10 specimens for each group. The microtensile bond strength test was performed using a microtensile testing machine. The failure mode of the fractured specimens was examined by means of an optical microscope at ${\times}20$ magnification. The data was analyzed using a one-way ANOVA and Scheffe's post-hoc test (${\alpha}$=.05). RESULTS. Additional etching groups showed significantly higher values than the no additional etching group when using All-Bond Universal. The light-cured composite resin groups showed significantly higher values than the self-cured composite resin groups in the Clearfil S3 Bond. CONCLUSION. The additional acid etching is beneficial for the dentin bond strength when using low acidic one-step self-etch adhesives, and low acidic one-step self-etch adhesives are compatible with self-cured composite resin. The acidity of the one-step self-etch adhesives is an influencing factor in terms of the dentin bonding strength and incompatibility with a self-cured composite resin.

• Journal of agricultural medicine and community health
• /
• v.24 no.2
• /
• pp.291-299
• /
• 1999

This study was conducted to evaluate the health status including mainly cognitive function and activities of daily living of institutional elderly in a rural area. We studied 466 subjects dwelling in ten institutions at Chonnam province, Korea. The participants consist of 148 males(31.8%) and 318 females(68.2%). We collected the information of socioeconomic state, mini-mental state examination(MMSE), activities of daily living(ADL), instrumental activities of daily living(IADL), and Dartmouth Primary Care Cooperative Information Project(COOP) chart. The results were followed: 1. Severe cognitive function impairment was appeared in 45 males(30.4%) and 115 females(36.2%). 2. The percentage of fully independent in the six ADL items was 50.0% of males and 42.8% of females, but 31.1% of males and 26.1% of females were fully dependent. 3. Males had more impairment in mode of transportation among IADL, but females had most impairment in laundry. 4. Observing health status by COOP chart, both had more grade in feeling and social activity than physical fitness.

• Journal of Preventive Medicine and Public Health
• /
• v.42 no.5
• /
• pp.298-304
• /
• 2009

Objectives : The aim of this study was to investigate the association of blood pressure levels with the common carotid artery intima-media thickness (CCA-IMT) and carotid plaques. Methods : Data were obtained from 2,635 subjects, aged 50 years and over, who participated in the Community Health Survey (a population-based, cross-sectional study) in Dong-gu, Gwangju city between 2007 and 2008. Participants were categorized into three groups according to blood pressure levels; normotensives (<120/80 mmHg), prehypertensives (120-139/80-89 mmHg), and hypertensives ($\geq$140/90 mmHg). Prehypertensives were further categorized as low prehypertensives (120-129/80-84 mmHg) and high prehypertensives (130-139/85-89 mmHg). Carotid intima-media thickness and plaques were evaluated with a high-resolution B-mode ultrasound. Statistical analyses were performed using chi-square test, ANOVA, and multiple logistic regression. Results : Prehypertensives had significantly greater maximal CCA-IMT values than normotensives, with a multivariate adjusted odds ratio of 1.78 (95% CI=1.36-2.32) for abnormal CCA-IMT (maximal CCA-IMT$\geq$1.0 mm), and 1.45 (95% CI=1.19-1.77) for carotid plaques. The multivariate adjusted odds ratio of low prehypertensives was 1.64 (95% CI=1.21-2.21) for abnormal CCA-IMT, and 1.30 (95% CI=1.04-1.63) for carotid plaques compared with normotensives. Subject with hypertension had higher frequency of abnormal CCA-IMT (odds ratio, 2.18; 95% CI=1.49-3.18), and carotid plaques (odds ratio, 1.98; 95% CI=1.46-2.67) compared with normotensives after adjustment for other cardiovascular risk factors. Conclusions : Our results indicate that there is a significant increase in the prevalence of carotid atherosclerosis in subjects with prehypertension (even in low prehypertensives) compared with normotensive subjects. Further studies are required to confirm the benefits and role of carotid ultrasonography in persons with prehypertension.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.1
• /
• pp.75-82
• /
• 2007

As one of the main support systems, rock bolts play a crucial role in the reinforcement of tunnels. Numerical and experimental studies using a transmission method of ultrasonic guided waves are performed to evaluate the integrity of rock bolts encapsulated by grouting paste. Numerical simulations using "DISPERSE" are carried out for the selection of the optimal experimental setup, i.e. non-destructive testing (NDT) system of the rock bolt. Based on results of the numerical simulation, the calculated frequency range for NDT testing is between 20kHz and 70kHz with the first longitudinal L(1) mode. Laboratory transmission tests are performed by attaching the piezo electric sensor at the tip of the rock bolt before embedding. Both of analytical and experimental results show that the amplitude of signals as well as the wave velocity increases with increase in the defect ratio of grouting paste. The defect in grouting paste means that the space around the rock bolt is not fully filled with the grouting paste. Experimental results also show that the increase of the wave velocity is more sensitive to the defect ratio increase than that of the amplitude. This study demonstrates that the transmission technique of ultrasonic guided waves may be a valuable tool in the evaluation of the rock bolt integrity.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.2
• /
• pp.84-91
• /
• 2005

For long time, the takeoff and landing control of airship was worked by human handling. With the development of the autonomous control system, the exact controls during the takeoff and landing were required and lots of methods and algorithms were suggested. This paper presents the result of airship take-off and landing by buoyancy control using air ballonet volume change and performance control of pitch angle for stable flight within the desired altitude. For the complexity of airship's dynamics, firstly, simple PID controller was applied. Due to the various atmospheric conditions, this controller didn't give satisfactory results. Therefore, new control method was designed to reduce rapidly the error between designed trajectory and actual trajectory by learning algorithm using an artificial neural network. Generally, ANN has various weaknesses such as large training time, selection of neuron and hidden layer numbers required to deal with complex problem. To overcome these drawbacks, in this paper, the RBFN (radial basis function network) controller developed. The weight value of RBFN is acquired by learning which to reduce the error between desired input output through and airship dynamics to impress the disturbance. As a result of simulation, the controller using the RBFN is superior to PID controller which maximum error is 15M.