• 한국식품과학회지
• /
• 제30권3호
• /
• pp.709-716
• /
• 1998

양송이의 알칼리 추출물에서 면역계의 주요인자인보체계와 macrophage를 활성화시키는 다당들을 분리, 정제하고 구조적 특성을 비교하였다. AB-20-IVa-2는 항보체 활성과 macrophage 활성능을 동시에 나타내는 단백다당으로 주요 구성당은 glucose > galactose > mannose 순으로 함유되어 있고 주요 구성아미노산은 phenylalanine (34.72%)과 valine (27.84%)이었다. AB-20-Ia와 AB-20-IIa-2a는 macrophage 활성을 갖고 있는 순수다당으로 AB-20-Ia의 주요 구성당은 glucose > xylose > mannose이고 AB-20-IIa-2a는 xylose > glucose > mannose이었다. AB-20-Ia, AB-20-IIa-2a, AB-20-IVa-2의 분자량은 각각 84만, 75만, 65만 정도로 추정되었다. AB-20-Ia, AB-20-IIa-2a, AB-20-IVa-2의 구조적 특성을 비교하기 위하여 NMR 분석, methyl화 분석을 통해 anomer 배위 양식과 당쇄 결합 양식을 조사하였다. AB-20-Ia는 ${\beta}-anomer$ 형태로 존재하는데 비해서 AB-20-IIa-2a는 ${\alpha}-$와 ${\beta}-anomer$ 모두 확인되었으며 ${\beta}-$의 비율이 좀 더 높았다. 또, AB-20-Ia와 AB-20-IIa-2a 모두 구성당 잔기에 acetyl기가 존재하였으며 특히, macrophage 활성능이 더 강한 AB-20-IIa-2a에 더 높은 비율로 함유되어 있었다. 이 정제 다당들의 당쇄 결합양식은 AB-20-Ia는 주로 ${\beta}-1,6-linked\;glucofuranosyl$ 잔기가 주쇄를 구성하고 있고, AB-20-IIa-2a는 1,6-linked glucopyranosyl 잔기가 주쇄를 이루고 여기에 측쇄들이 1,4 결합으로 연결된 다당으로 추정되었다. 또, AB-20-IVa-2는 1,2-linked xylofuranosyl 잔기와 1,6-linked glucopyranosyl 잔기가 주쇄를 이루고 이 xylofuranosyl 잔기에 측쇄들이 1,3 결합으로 연결된 다당으로 추정되었다.

• 한국수소및신에너지학회논문집
• /
• 제17권1호
• /
• pp.31-38
• /
• 2006

There are two types of metal hydride electrodes as a negative electrode in a Ni-MH battery, $AB_2$ Zr-based Laves phases and $AB_5$ LM(La-rich mischmetal)-based alloys. The $AB_5$ alloy electrodes have characteristic properties such as a large discharge capacity per volume, easiness in activation, long cycle life and a low cost of alloy. However they have a relatively small discharge capacity per weight. The $AB_2$alloy electrodes have a much higher discharge capacity per weight than $AB_5$ alloy electrodes, however they have some disadvantages of poor activation behavior and cycle life. Therefore, in order to improve the discharge capacity of the $AB_5$ alloy electrode the Zr, Ti and V which are the alloying elements of the $AB_2$ alloys were added to the $LaNi_{3.6}Ai_{0.4}Co_{0.7}Mn_{0.3}$ alloy which was chosen as a $AB_5$ alloy with a high capacity. The addition of Zr, Ti and V to $LaNi_{3.6}Ai_{0.4}Co_{0.7}Mn_{0.3}$ alloy improved the activation to be completed in two cycles. The discharge capacities of Zr 0.02, Ti 0.02 and V 0.1 alloys in $LaNi_{3.6}Ai_{0.4}Co_{0.7}Mn_{0.3}M_y$ (M = Zr, Ti, V) were respectively 346, 348 and 366 mAh/g alloy. The alloy electrodes, Zr 0.02, Ti 0.05 and V 0.1 in $LaNi_{3.6}Ai_{0.4}Co_{0.7}Mn_{0.3}M_y$ (M = Zr, Ti, V), have shown good cycle property after 200 cycles. The rate capability of the $LaNi_{3.6}Ai_{0.4}Co_{0.7}Mn_{0.3}M_y$ (M = Zr, Ti, V) alloy electrodes were very good until 0.6 C rate and the alloys, Zr 0.02, Ti 0.05 and V 0.1, have shown the best result as 92 % at 2.4 C rate. The charge retention property of the $LaNi_{3.6}Ai_{0.4}Co_{0.7}Mn_{0.3}M_y$ (M = Zr, Ti, V) alloys was not good and the alloys with M content from 0.02 to 0.05 showed better charge retention properties.

• 한국수소및신에너지학회논문집
• /
• 제18권1호
• /
• pp.52-59
• /
• 2007

We investigated the effects of the addition of Mn and $AB_5$ type alloy on the electrochemical characteristics of Ti-Cr-V BCC type alloys as anode materials for Ni-MH battery. The activation behavior and discharge capacity of the BCC type alloys were significantly improved by ball-milling with the $LmNi_{4.1}Al_{0.25}Mn_{0.3}Co_{0.65}$ alloy, because the $AB_5$ type alloy acted as hydrogen path on the surface of the BCC type alloy. Among the Mn substituted alloys($Mn=0.03%{\sim}0.08%$), the $Ti_{0.32}Cr_{0.38}Mn_{0.05}V_{0.25}$ alloy ball-milled with $AB_5$ type alloy exhibited the greatest discharge capacity of $336\;mAh{\cdot}g^{-1}$. In addition, Mn substituted alloys exhibited the lower plateau pressure in P-C- T curve, the better hydrogen storage capacity and faster surface activation compared with the alloy without Mn.

• 한국표면공학회지
• /
• 제30권4호
• /
• pp.262-271
• /
• 1997

Nickel-matal hydride(Ni-MH) batteries are receiving attention as non-pollunting. high performance rehargeable energy stoage system. The performance of Ni-Mh is significantly influenced by the hydrogen storage alloy materiels used as an anode material. Recently, having discharge capacities higher than the $AB_5$-type hydrogen storage alloys, the Zr-based $AB_2$-Type hydrogen storage alloys has remaining problems regarding cycle life and self-dischareg. These problems need to be solved by improvements in the alloy design and/or surface treatment. This work investiggates the effects the effects of surface property by fluorination on $Zr_{0.7}Ti_{0.3}V_{0.4}Mn_{0.4}Ni{1.2}$ composittion $AB_2$-Type hydrogen storage alloys. EPMA, SEM and AES techniques were used for surface analysis, and the crystal structure was characterized by constant current cycling test and potential sweep methods. Fluorination was found to be effective when La-was incorporated into the alloy, and has unique morphology, higher reactivity, and at the same time formed a protective film. Through, fluorination, the cycle life of an electrode was found to increase significantly, charge/discharge characteristics of the electrode the potential difference between the charge/discharge plateau, i.e polarization(overpotential)were improved.

• Applied Biological Chemistry
• /
• 제39권2호
• /
• pp.153-158
• /
• 1996

광독립 영양세포를 이용하여 미생물유래 제초활성 물질을 탐색하던 중 강한 제초활성을 갖는 균주를 선발하고, 그 균주가 생산하는 활성 물질들을 분리 정제한 후 구조를 결정하였으며, 이들의 활성을 조사하였다. 선발된 ME-13 균주의 미생물학적 특성을 조사한 결과 Streptomyces로 동정되어 본 균주를 Streptomyces sp. ME-13으로 명명하였다. 균배양 상등액으로부터 활성탄소흡착, sillca gel, MCI gel등의 column chromatography 및 HPLC를 통하여 2 가지 활성 물질을 순수 분리하였다. 이들 화합물은 기기분석결과, anisomycin계의 AB3217-A와 B로 각각 동정되었다. AB3217-A와 B는 25ppm 농도에서 무와 피의 종자 발아를 완전히 억제하였고, 종자 발아후 50% 생육저해농도는 약 6 ppm 정도로 서로 비슷하였으며 anisomycin보다 6배 정도 강한 제초활성을 보였다. 이와 같은 제초활성은 본 연구에 의하여 처음으로 밝혀졌다.

• 한국수소및신에너지학회논문집
• /
• 제8권4호
• /
• pp.181-185
• /
• 1997

The electrochemical properties of the $AB_2$-type (Zr-Ti-V-Ni-Cr-Co-Mn) metal hydride electrodes prepared by ball milling with $AB_5-type\{(LM)Ni_{3.6}Al_{0.4}Co_{0.7}Mn_{0.3}\}$(LM : Lanthanum-rich mischmetal) alloy powder as a surface activator were investigated. By ball milling with $AB_5$ type alloy powder, the activation of $AB_2$ type metal hydride electrode was accelerated resulting in an increase of discharge capacity from 35% to 85% of the maximum capacity at the first cycle. As the amount of surface activator increased the activation rate increased, whereas the discharge capacity increased with 10wt% and decreased with 20wt% addition of the surface activator. When the amount of the surface activator was kept constant as 10wt%, the discharge capacity and the activation rate increased with ball milling time up to 20 hours. However beyond 20 hours of ball milling time, they decreased drastically due to the nano-crystallization or amorphorzation of the alloy powder.

• 한국수소및신에너지학회논문집
• /
• 제11권4호
• /
• pp.189-202
• /
• 2000

$AB_2$ type Zr-based Laves phases alloys have been studied for potential application as a negative electrode in a Ni-MH battery. The $AB_2$-type electrodes have a much higher energy density than $AB_5$-type electrodes per weight, however they have some disadvantages such as poor activation behavior and cycle life etc. Nonetheless, the $AB_2$-type electrodes have been studied very extensively due to their high energy density. In this study, in order to develop the cycle life, the Mn of $AB_2$ alloy composition was substituted partially by Mo. The alloys were melted by arc furnace and remelted 4-5 times for homogeneity. The alloy powder was used below 200-325 mesh for experiments. The structures and phases of the alloys were analyzed by XRD, SEM and EDS, and measured the curve of a pressure-composition isotherms. The electrodes were prepared by cold pressing of the copper-coated(25 wt%) alloy powders, and tested by a half cell. The results are summarized as follows. The cycle life was improved with the increase of Mo amount in $Zr_{1-x}Ti_xV_{0.4}Ni_{1.2}Mn_{0.4}Mo_y$(x=0.3, 0.4) and the activation was faster, whereas the discharge capacity decreased.

• 대한전자공학회논문지
• /
• 제13권5호
• /
• pp.1-8
• /
• 1976

게이트의 길이가 2mm인 GaAb 금속반도체전계치과트랜지스터를 HP8545 자동회로망분석기에 의하여 주파수 1∼2GHz 사이에서 산란계수를 측정하였고, 산란계수의 도움으로 완전한 등가회로를 구현하였다. 본 논문에서는 50Ω의 높은 입출력 Impedance로 정합시키기 위하여 Microstrip을 사용하여 GaAs MESFET증폭기를 개발하였으며 전력이득이 8dB, 정재파비가 1.5보다 적은 결과를 얻었다. Microwave GaAs Metal Semiconductor Field effect Transistors (MESFET) with the gate-length of two micrometers are investigated. The scattering parameters of the transistors have been measured from 1GHz to 2GHz by Hp8545 Automatic network analyzer. From the measured data, an equivalent circuit is established which consists of an ntrinsic and. extrinsic transistor elements. In this paper, GaAb MESFET Amplifier is used in conjunction with conventional microstrip techniques to match into a 50 ohms high input/output impedances system. We found that Power gain is less than 8dB and VSWR is less than 1.5 in L-Band.

• 한국수소및신에너지학회논문집
• /
• 제20권3호
• /
• pp.216-223
• /
• 2009

The relation between temperature and hydrogen desorption on variation in output was investigated for the metal hydride canister. For this study, an AB$_5$ type alloy were chosen as a hydrogen storage material in the metal hydride canister. And application to the single proton exchange membrane fuel cell was evaluated. As the results, the hydrogen desorption was linearly increased as the temperature was risen. In addition, metal hydride canister heating was able to correspond the variation of load as power request in the PEMFC system.

• 한국미생물생명공학회:학술대회논문집
• /
• 한국미생물생명공학회 1976년도 제7회 학술발표회
• /
• pp.182.4-182
• /
• 1976

음이온계 합성세제인 ABS(alkyl benzene sulfonate)의 분해능이 우수한 균주를 자연계에서 분리하여 Pseudomonas caryophylli로 동정하였다. ABS 10 ppm을 함유한 인공폐수에서 분리 균주를 배양시 ABS는 40％이상, BOD는 89％, COD는 71％ 감소되었으며 ABS분해능은 자연미생물군에 의한 혼합배양시의 2배이상이었다. 분리균주에 의한 시판합성세제의 분해율은 Hlti 46.2％, Kleenup 37.5％, No. 1 39％, OK 37.8％이었다.