• 한국환경과학회지
• /
• 제32권5호
• /
• pp.385-394
• /
• 2023

There is a need for a method that can effectively remove wastewater containing small-sized particles such as TiO₂. In this study, we attempted to remove TiO₂ wastewater using electrocoagulation-electroflotation two-step separation. The TiO₂ wastewater was effectively removed via batch electrocoagulation-electroflotation separation. However, in the batch process, the simultaneous operation of electrocoagulation and electoflotation was challenging due to the high residual turbidity. In the continuous operation, electrocoagulation and electoflotation reactors were kept separate. The turbidity removal in continuous operation was similar to that in the batch process, nevertheless, the residual Al concentration was high, leading to the conclusion that counterterm ensures against residual Al were necessary.

• 한국세라믹학회지
• /
• 제42권7호
• /
• pp.503-508
• /
• 2005

A simple and effective method for the synthesis of LiMn$_{2}$O$_{4}$ powder as a cathode material for lithium secondary battery is reported. Micrometer size LiMn$_{2}$O$_{4}$ was prepared by combustion synthesis technique employing initial mixture of l.l LiNO$_{3}$ -1.3Mn-0.7MnO$_{2}$-1NaCl composition. Parametric study of the combustion process including molar ratio of Mn/MnO$_{2}$ and NaCl concentration were carried out under air atmosphere. The combustion products obtained were additionally heat treated at the temperature 900$^{\circ}C$ and the washed by distilled water. The results of charging-discharging characteristics revealed that LiMn$_{2}$O$_{4}$ cell synthesized in the presence of NaCl had a high capacity and much better reversibility than one formed without NaCl An approximate chemical mechanism for LiMn$_{2}$O$_{4}$ formation is proposed.

• 한국세라믹학회지
• /
• 제34권6호
• /
• pp.577-582
• /
• 1997

The mechanical properties of Al2O3-ZrO2 composites fabricated by RBAO(reaction bonded aluminium oxide) process were investigated. As the amount of ZrO2 increased the sinstered density of Al2O3-ZrO2 composites decreased slightly, but wear resistance was enhanced. Bending strength of Al2O3-ZrO2 composites increased in proportion to the amount of al in case of a fixed ZrO2 content. When the amount of Al was fixed bending strength reached its maximum value at 25 wt% ZrO2. The fracture toughness(K1c) increased with increasing content of ZrO2, but decreased with increasing Al amount. On the other hand, the fracture mode of Al2O3-ZrO2 composites was the mixed mode of inter-and transgranular fracture.

• 반도체디스플레이기술학회지
• /
• 제22권4호
• /
• pp.26-31
• /
• 2023

We investigated the impact of NF₃ / H₂O remote plasma dry cleaning conditions on the SiO₂ etching rate at different preparation states during the fabrication of ultra-large-scale integration (ULSI) devices. This included consideration of factors like Si crystal orientation prior to oxidation and three-dimensional structures. The dry cleaning process were carried out varying the parameters of pressure, NF₃ flow rate, and H₂O flow rate. We found that the pressure had an effective role in controlling anisotropic etching when a thin SiO₂ layer was situated between Si₃N₄ and Si layers in a multilayer trench structure. Based on these observations, we would like to provide further guidelines for implementing the dry cleaning process in the fabrication of semiconductor devices having 3D structures.

• 한국분말재료학회지
• /
• 제27권2호
• /
• pp.132-138
• /
• 2020

A facile one-pot wet chemical process to prepare pure anatase TiO₂ hollow structures using ammonium hexafluorotitanate as a precursor is developed. By defining the formic acid ratio, we fabricate TiO₂ hollow structures containing fluorine on the surface. The TiO₂ hollow sphere is composed of an anatase phase containing fluorine by various analytical techniques. A possible formation mechanism for the obtained hollow samples by self-transformation and Ostwald ripening is proposed. The TiO₂ hollow structures containing fluorine exhibits 1.2 - 2.7 times higher performance than their counterparts in photocatalytic activity. The enhanced photocatalytic activity of the TiO₂ hollow structures is attributed to the combined effects of high crystallinity, specific surface area (62 ㎡g^-1), and the advantage of surface fluorine ions (at 8%) having strong electron-withdrawing ability of the surface ≡ Ti-F groups reduces the recombination of photogenerated electrons and holes.

• Transactions on Electrical and Electronic Materials
• /
• 제10권5호
• /
• pp.177-181
• /
• 2009

Employing statistical design of experiments, we have performed studies on the characterization of electrodes using $TiO_2$ and process variables in the fabrication process of nanocrystalline dye sensitized solar cell. Systematic experiment to identify the effects of process variables on cell's efficiency has based on broad-band absorption of light by tailor made organometallic dye molecules dispersed on a high surface of $TiO_2$. Employing statistical design of experiment on $TiO_2$ photoelectrode forming process, structural characterization of electrodes and process variable have been investigated. Through the statistical analysis we have found that the particle size of $TiO_2$ and the amount of PEG/PEO are significantly affecting on the cell efficiency. In addition, a significant amount of interaction exists between the particle size and the amount of PEG/PEO.

• 환경위생공학
• /
• 제15권4호
• /
• pp.26-34
• /
• 2000

In order to treat the dyeing wastewater, the $UV/TiO_2/H_2O_2$ system was investigated, and proper pretreatment methods were examined to reduce the load on the system considering economical and technical efficiency. The results of this study were as follows: 1. $UV/TiO_2/H_2O_2$ system with pretreatment process was adopted, the result of Chemical coagulation and pH control units was $pH{\;}11{\;}{\rightarrow}{\;}coagulation{\;}{\rightarrow}{\;}pH{\;}4$ and the optimum dosage of $FeCl_3$ was $600mg/{\ell}$. 2. Proper dosage of $TiO_2$ in the $UV/TiO_2/H_2O_2$ system with pretreatment process was $2g/{\ell}$ and $H_2O_2$ was $1000mg/{\ell}$, UV contact time was 20min to get $200mg/{\ell}$ of $COD_{Cr}$.

• 대한환경공학회지
• /
• 제30권8호
• /
• pp.823-830
• /
• 2008

Rhodamine B(RhB) 탈색에 대한 광전기촉매 공정의 적용가능성을 분말 TiO$_2$를 충전한 슬러리 광전기촉매 반응기에서 연구하였다. 광전기촉매 공정의 반응기 시스템은 분말 TiO$_2$, Pt 전극 및 3개의 8 W UV-C 등으로 구성되어 있다. 전류, 전해질, 공기 유량 및 전극 재질과 같은 운전 인자의 영향을 고찰하였다. 광전기촉매 공정의 최적 광촉매 량과 전류는 각각 0.4 g/L과 0.02A이었다. 광촉매 공정과 전기분해 단독 공정에 의해 분해되는 RhB의 합보다 광전기촉매 공정에 의해 더 빨리 분해되었는데, 광촉매 공정과 전기분해 공정의 결합에 의한 시너지 효과를 나타내는 것으로 사료되었다. 광전기촉매 공정은 공기 유량에 의해 영향을 받는 것으로 나타났고 최적 공기 유량은 2 L/min이었다. RhB 탈색에 대한 전극 재질과 NaCl 효과는 본 실험범위에서는 크지 않은 것으로 나타났다.

• 한국세라믹학회지
• /
• 제28권11호
• /
• pp.935-941
• /
• 1991

Effects of calcination process and ZrO2 addition on the electrical properties of [(Ba0.82Sr0.08Ca0.1)O]m(Ti1-$\chi$Zr$\chi$)O2 ceramics have been investigated. With the variation of A/B-site ratio m of the dielectric formulations, sintering behavior and the resistivity after sintering in a reducing atmosphere have been affected by the calcination process. When the dielectric formulations of m=1.01 were sintered in a reducing atmosphere, the room-temperature resitivity of 109 {{{{ OMEGA }}.cm was obtained for samples processed with two-step calcination, which was much lower than 1012 {{{{ OMEGA }}.cm of samples calcined once. It was confirmed that high resistivity of Ca-doped BaTiO3 ceramics, after sintering in a reducing atmosphere, is maintained by acceptor-like behavior of CaTi" which is formed by Ca substitution to Ti-site. It was also found out that the critical amount of B-site Ca substitution for reduction inhibition of BaTiO3 is around 0.005 mol. With the increasing amount of ZrO2 addition to dielectric formulations, Curie peak was depressed and Curie temperature was lowered due to the enhanced diffuse phase transition.tion.

• 한국세라믹학회지
• /
• 제43권9호
• /
• pp.575-581
• /
• 2006

To precipitate the complex gel of flux and aluminum hydroxides gel, aqueous solution of the mixture of $Na_2CO_3\;and\;Na_2PO_4{\cdot}12H_2O$ was added with stirring in aqueous solution of the mixture of $Al_2(SO_4)_3{\cdot}14{\sim}18H_2O,\;Na_2SO_4$, and then the complex gel was aged in $0{\sim}30h\;at\;90^{\circ}C$. As aging time passed, the aluminum hydroxides was grown into the acicular AlO(OH) gel. Also, aging time had an effect on physical properties of the AlO(OH) gel and on crystal growth of the flaky ${\alpha}-Al_2O_3$ prepared by molten-salt precipitation. In this study, the complex gel was crystallized in temperature range of $400{\sim}1,200^{\circ}C$ after drying at $110^{\circ}C$, and then it was investigated to effect of aging time on precipitation temperature, size, thickness, morphology and particle size distribution of the flaky ${\alpha}-Al_2O_3$ crystal. As aging time passed, the flaky a${\alpha}-Al_2O_3$ crystal showed a tendency toward an increase in size and thickness as result from an increase in BET surface area and pore volume of the acicular AlO(OH) gel.