• The Korean Journal of Pesticide Science
• /
• v.6 no.4
• /
• pp.257-263
• /
• 2002

This study was carried out not only to investigate the toxicities of 12 registered insecticides on different developmental stages, but also to determine the sublethal effects on longevity and reproduction of newly emerged adult female and development of the next generation in the rice skipper, Parnara guttata. Fenitrothion, fenthion, cartap hydrochloride, ethofenprox highly suppressed egg-hatch. All insecticides treated showed high larvicidal activity on the 1st to 2nd instar larva. The insecticides showed higher larvicidal activities on the 5th instar larva were fenitrothion, fenthion, ethofenprox, fipronil, methoxyfenozide, tebufenozide and Bt. var. kurstaki. The sublethal doses of fenthion, tebufenozide, cartap hydrochloride, methoxyfenozide, ethofenprox, imidacloprid and fipronil shortened the longevities of newly emerged adult female from the treated larva ($3{\sim}4$ instar). BPMC, imidacloprid, ethofenprox, fipronil and methoxyfenozide delayed the preoviposition periods of adult females and decreased the number of eggs laid when they were treated at the larval stages of the previous generation. Ethofenprox caused severe sublethal effects on P. guttata offspring, completely blocking the production. All insecticides except fenitrothion affected the egg viability, and all eggs from the adult females emerged from the survivors treated larvae with imidacloprid or fipronil fail to hatch. IGRs, methoxyfenozide and tebufenozide showed an adverse effect on the development of next generation larva.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.3
• /
• pp.53-67
• /
• 1994

This paper describes the design of a high-level synthesis system. SODAS-VP. which automatically generates hardwares executing operation sequences in pipelined fashion.Target architecture and clocking schemes to drive pipelined datapath are determined, and the handling of pipeline hazards which degrade the performance of pipeline is considered. Partitioning of an operation into load, operation, and store stages, each of which is executed in partitiones control step, is performend. Pipelinecl hardware is generated by handling pipeline hazards with internal forwarding or delay insertion techniques in partitioning process and resolving resource conflicts among the partitioned control steps with similarity measure as a priority function in module allocation process. Experimental results show that SODAS-VP generates hardwares that execute faster than those generated by HAL and ALPS systems. SODAS-VP brings improvement in execution speed by 17.1% and 7.4% comparing with HAL and ALPS systems for a MCNC benchmark program, 5th order elliptical wave filter,respectively.

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.5
• /
• pp.501-519
• /
• 2014

An explosive expansion of the use of smart devices such as smart phones and tablet PCs in mobile telecommunications service is bringing about a steep increase of mobile traffic volumes. Mobile network operators or telcos are introducing the $4^{th}$ generation LTE network, which handles traffics more efficiently, to respond such enormously increasing traffics. Meanwhile, it is wondered how LTE contributes to raising a competitive edge of telcos. This paper aims at empirically testing whether the first mover of LTE acquired its competitive advantages. In this paper, we analyzed a number of telcos of 10 major countries. As a result, it turned out that there is no first mover's advantages, that is, the first mover did not have any competitive advantages in market share, profitability, and so on.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.46-49
• /
• 2007

Multiple Antenna Technologies such as Multiple-Input Multiple-Output (MIMO) and Beamforming provide the increase of channel capacity and the reliability of wireless link. To obtain these advantages, WiBro, Mobile WiMAX and $4^{th}$ Generation System are employing multiple antenna technologies. There exist, however, many technical issues in considering the application of the technologies or the providing of services using them. In this paper, various technical topics are discussed and simple solutions are proposed. Beamforming has several technical issues which include coverage imbalance, difficulties in providing Multicast-Broadcast Service (MBS). In Addition, network planning is a critical point from a cell extension and initial network entry point of view. In case of MIMO, network deployment is discussed in that cellular data network such as WiBro has many repeaters. MIMO mode selection for maximizing the cell capacity is also covered.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2017.10a
• /
• pp.19-27
• /
• 2017

In spite of adoption of Intact Stability Code Part A as mandatory, the accidents have been occurred frequently caused by dynamic stability. Therefore International Maritime Organization (IMO) is revising the Intact Stability Code to prevent the cause of accidents. The result of 4th meeting of Sub-committee on Ship Design and Construction (SDC), five mode of the cause was defined and establishing each draft regulations. We consider physical background, mathematical description, draft regulations for five failure mode and sample calculations for ships built by STX Offshore & Shipbuilding.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.55-58
• /
• 2007

To check the feasibility of SMART (Steam Methane Advanced Reforming Technology)system, an experimental investigation was conducted. A fluidized bed reactor of diameter 0.052 m was operated cyclically up to the $10^{th}$ cycle, alternating between reforming and regeneration conditions. FCR-4 catalyst was used as the reforming catalyst and calcined limestone (domestic, from Danyang) was used as the $CO_2$ absorbent. Hydrogen concentration of 98.2% on a dry basis was reached at $650^{\circ}C$ for the first cycle. This value is much higher than $H_2$ concentration of 73.6% in the reformer of conventional SMR (steam methane reforming) system. However, the hydrogen concentration decreased because the $CO_2$ capture capacity decreased as the number of cycles increased.

• 전기의세계
• /
• v.26 no.1
• /
• pp.71-76
• /
• 1977

It has been expected that the 4th generation computers will be characterized for their problem adaptability. There are few techniques of implementing such a characteristic. One of the techniques that one have considered in this paper the user microprogrammable computer architecture. There are two different computer architectures that support user microprogramming. One uses the writeable control storage and another uses the main memory. The concept of utilizing writeable control storage for microprogramming was developed in 1950's and since then the most of the user microprogrammable computers produced belong to such category. The concept of utilizing the main memory for user microprogramming was first introduced by Thomas in 1973. This architecture has a strong advantage in the aspect of the system cost. In this paper, we have developed a user microprogrammable computer. The computer utilizes the main memory for user microprograms. It employs a 32 bit micro-instruction word in the form of the little encoded. The performance of the developed machine will be evaluated in the hard ware cost, programming easiness and the running time.

• Proceedings of the Technology Innovation Conference
• /
• 2004.02a
• /
• pp.202-221
• /
• 2004

Technology is the most important determination factor on firm`s competitiveness. It helps firms to secure sustainable competitive advantages. Therefore Korean electronics part firms have increased their R&D investment since the 1990s. But their R&D management capabilities seem to be low level. Empirical study was undertook to verify factors that effect on R&D performance with enhancing R&D management capabilities. To accomplish the purpose, data collected valid samples in Seoul and Kyunggi Province. Using SPSSWIN 10.0package, regression analysis was used to verify hypotheses. This study verify that important factors of 4th R&D generation effect on improving R&D performance. Therefore Korean electronics firms must learn advanced firms in developed countries. Based on learning and accumulating R&D management capabilities, Korean electronics part firms should establish their firm-specific R&D management model.

• Electronics and Telecommunications Trends
• /
• v.33 no.5
• /
• pp.86-94
• /
• 2018

Information-Centric Networking (ICN) has been recognized as a new networking technology for the upcoming data-centric 4th industrial revolution based society. In addition, it has noted that Pub/Sub-style communication is rapidly growing in areas including big data processing and microservice as well as the existing Internet of Things and social networking technologies. Therefore, ICN is highly needed to efficiently support Pub/Sub-style communication for successful deployment as a next-generation network infrastructure technology. This paper summarizes the recent research trends of Pub/Sub communication technologies over ICN, and discusses future research issues.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.12
• /
• pp.847-852
• /
• 2016

Using both EVA and POE encapsulants, we fabricated polycrystalline Si PV modules and performed a set of reliability tests of PID, DH, TC, and Complex prior to outdoor installation. The power output with temperatures and insolation as well as I-V characteristics had been monitored under outdoor environments for 18 months. In the entire period, the total power of 3,576 kWh from POE PV modules was observed larger than 3,449 kWh from EVA PV modules by 3.5%. All the PV modules showed a 5.6~9.2% drop in the conversion efficiency. As for the solar power generation, the PV modules performed through PID, TC test revealed distinct difference in between EVA and POE for which the POE PV module produced more power by +11.4% and +6.6%, respectively, as measured in the 18th month. In addition, POE was proved to protect better the solar cells under PID influence.