• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.350-355
• /
• 2009

Bond strength depends on characteristics of bonding surface and restorative technique. The majority of studies dealing with dentin bond strength were carried out on flat bonding surface, therefore, difference of bond strength between axial wall and pulpal wall is not clear yet. This study evaluated bonding difference between cavity walls in class I composite resin restoration with different filling techniques. Twenty extracted caries-free human third molars were used. Cavities were prepared in 6 ${\times}$4 ${\times}$3 mm box-type and divided into four groups according to filling technique and bonding surface: Group I; bulk filling - pulpal wall, Group II; bulk filling - axial wall, Group III; incremental filling - pulpal wall, Group IV; incremental filling - axial wall. Cavities were filled with Filtek $Z250^{(R)}$(3M/ESPE., USA) and Clearfill SE $bond^{(R)}$(Kuraray, Japan). After 24 hour-storage in $37^{\circ}C$water, the resin bonded teeth were sectioned bucco-lingualy at the center of cavity. Specimens were vertically sectioned into 1.0 ${\times}$1.0 mm thick serial sticks perpendicular to the bond surface using a low-speed diamond saw (Accutom 50, Struers, Copenhagen, Denmark) under water cooling. The trimmed specimens were then attached to the testing device and in turn, was placed in a universal testing machine (EZ test, Shimadzu Co., Kyoto, Japan) for micro-tensile testing at a cross-head speed of 1 mm/min. The results obtained were statistically analyzed using 2-way ANOVA and t-test at a significance level of 95%. The results were as follows: 1. There was no significant difference between bulk filling and incremental filling. 2. There was no significant difference between pulpal wall and axial wall, either. Within the limit of this study, it was concluded that microtensile bond strength was not affected by the filling technique and the site of cavity walls.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.5
• /
• pp.643-650
• /
• 2007

It has been known that Samultang has positive effects on blood circulation and erythrocyte formation. Samultang was composed of four ingredients, Angelica gigas Nikai, Rahmanniae Radix Preparata, Paeonia lactiflora Pallas, and Cnidium officinale Makino. Five types of bread were prepared by replacing water with Samultang for dough proportionally. Control (C) did not have Samultang and the other four experimental bread contained Samultang: S-I (25% of water was substituted by Samultang), S-II (50% substituted), S-III (75% substituted), and S-IV (100% substituted). Moisture, protein, and ash contents of Samultang were $97.34{\pm}0.11%,\;0.42{\pm}0.04%,\;and\;1.40{\pm}0.16%$, respectively. Replacing water with Samultang decreased pH and increased significantly wet gluten content of the dough. Substitution of Samultang for water incremented redness and yellowness of the dough and bread and increased hardness. It also raised the contents of ash and protein. Although it was not significant, in addition, moisture loss of the bread during storage seemed to be lessened by replacing water with Samultang. However, total volume and specific loaf volume of the bread, baking loss rate, and the other textural characteristics except hardness were not affected by substituting water with Samultang. Due to the above results, sensory evaluation of volume and gumminess of the bread were improved significantly by substituting Samultang for water. The bread replaced 25% of the water with Samultang was ranked as the best by the test of sensory evaluation. These results imply that adding Samultang instead of water to dough for bread might bring positive effects on quality characteristics of the bread without any adverse influences. Therefore, it might be worth developing functional bread using Samultang.

• Korean Journal of Food Science and Technology
• /
• v.42 no.1
• /
• pp.50-55
• /
• 2010

This study was conducted to investigate the shelf-life and quality of breads made with 0.5, 1 and 2% of Myagropsis myagroides fermented ethanol extracts (MOE). The total microbial count in breads made with 2% MOE decreased to about 1.6 log cycles as compared to that of breads not containing MOE. The protection index measured by rancimat increased with an increase in the quantity of MOE in the breads. During the storage period, the pH value was not different between breads containing MOE and breads not containing MOE. The lightness and redness of the breads decreased with an increase in the quantity of MOE, while the yellowness increased. In the sensory evaluation, the breads containing 0.5% MOE were more preferred than the breads not containing MOE. These results suggest that the addition of 0.5% MOE to breads has a good effect on improving the shelf-life and overall quality.

• Food Science of Animal Resources
• /
• v.29 no.2
• /
• pp.220-228
• /
• 2009

This study was conducted to determine the preblending effect of curing agents on the characteristics of mechanically deboned chicken meat (MDCM), including the pH, water-holding capacity (WHC), and stability under refrigeration conditions. MDCM was preblended with different curing agents [NaCl, 0.75 or 1.5%; sodium tripolyphosphate (STPP), 0.25 or 0.5%; ascorbic acid, 250 or 500 ppm; sodium nitrite, 75 or 150 ppm] and were stored at $4^{\circ}C$ overnight. The preblending of NaCl was found to have improved the WHC and emulsion stability; STPP was found to have improved the pH, WHC, and emulsion stability; and ascorbic acid or sodium nitrite did not affect the pH, WHC, and emulsion stability. The addition of ascorbic acid or sodium nitrite, however, decreased the 2-thiobarbituric acid (TBA) and volatile basic nitrogen (VBN) values of the preblended MDCM through the antioxidizing properties. The mixing effects of different curing agents on MDCM were also evaluated with nine different conditions. Among the treatments, the mixture of NaCl and STPP improved the WHC and emulsion stability due to the increased solubility of salt-soluble protein in the preblended MDCM. The mixture of NaCl, STPP, and ascorbic acid increased the pH, WHC, and emulsion stability, but the mixture of NaCl, STPP, ascorbic acid, and sodium nitrite improved the WHC, emulsion stability, and redness of the surface color with improved storage stability due to the decreased VBN and TBA values. As a result, the mixture of 1.5% NaCl, 0.5% STPP, 500 ppm ascorbic acid, and 75 ppm sodium nitrite showed the best properties as curing agents for MDCM preblending.

• Journal of Dairy Science and Biotechnology
• /
• v.32 no.1
• /
• pp.47-53
• /
• 2014

In this study, our aim was to investigate the changes in ginsenosides and polyphenols in red ginseng extract fermented by Lactobacillus acidophilus and to manufacture fresh cheese using fermented red ginseng extract. Red ginseng extract (3%, w/v) was fermented by L. acidophilus for 24 h. On performing lactic acid bacteria counts, we determined that L. acidophilus reached its maximum growth phase after 16 h; this was followed by decrease in growth. During fermentation, the levels of ginsenosides Rg3 (20S) and Rg3 (20R) as well as protopanaxadiol (20R), F1, and compound K increased, while those of s Rb2, Rd, Rf, and Rg1 decreased. The pH, titratable acidity, and viable cell counts in fresh cheese prepared using fermented red ginseng extract were measured during the storage period. The pH decreased over time, while titratable acidity and viable cell counts increased with increase in the duration of the storage period. Sensory tests showed that the overall sensory properties of fresh cheese prepared using 1% fermented red ginseng extract were similar to those of the control groups. This result suggests that L. acidophilus-fermented red ginseng has potential for development as a new bioactive material.

• Food Science and Preservation
• /
• v.21 no.5
• /
• pp.676-687
• /
• 2014

This study investigated the quality changes in cabbage brined with deep sea water salt and in a commercial brined cabbage product. The subject cabbages were separated into two groups: those manufactured in the Lab (ML) and the commercial brined cabbage product (CP). Each group had three brining treatments: with sun-dried salt (S, CS), refined salt (R, CR), and deep sea water salt (D, CD). The salinity level of the ML group was 2.1~2.3%, higher than that of the CP group (1.1~1.5%). The total plate count (TPC) was detected as 5.0 log CFU/g with the S, R, and D treatments at Day 7, but the growth rate of the TPC with the CS, CR, and CD treatments was faster than that with the S, R, and D treatments (6.9~7.7 log CFU/g). A lactic acid bacteria (LAB) level of 5.0~6.6 log CFU/g was also detected in the S, R, and D samples, but only 7.0~7.6 log CFU/g was detected in the CP groups at Day 14. The instrumental hardness levels of the cabbage brined with the deep sea water salts (D and CD) were 3,971 g and 3,932.4 g, respectively, which were significantly higher than those of the samples that were salted with sun-dried salt and refined salt (p<0.05). As for the sensory attributes, S, D, and CD maintained their marketability scores until the end of the storage period for all the properties. CD presented the highest total free amino acid (478.9 mg%), glutamic acid (107.0 mg%), citric acid (428 mg%), and sodium (189 ppm) contents.

• Food Science and Preservation
• /
• v.17 no.1
• /
• pp.50-57
• /
• 2010

To develop a new functional kimchi with antioxidative properties, salted baechu was soaked in black rice water extract for 6 h at room temperature. The antioxidative property of the water extract was $78.75{\pm}1.18%$ that of the control (0.1% [w/v] alpha-tocopherol). The black rice gel was added to the baechu kimchi preparation. The color of baechu kimchi treated with black rice water extract changed to dark violet and/or black. Control kimchi and black rice water-treated kimchi were stored at $4^{\circ}C$ for 30 days. No significant differences were detected between the control and the black rice water-treated group in the early stages of fermentation. As fermentation time increased, pH decreased and titratable acidity increased rapidly in control kimchi. However, such marked changes were not evident in test kimchi. The hardness value of black rice water-treated kimchi was higher than that of control kimchi after the midpoint of the fermentation period. The storage life of baechu kimchi treated with black rice water extract was prolonged by up to 5 days compared with control samples, owing to a decline in lactic acid bacteria and yeast levels during the final fermentation period in black rice water-treated kimchi. The total phenolic levels and the antioxidative capacity of black rice water-treated kimchi (83%) were approximately 1.5-fold higher than in control kimchi (57%). In sensory evaluation, black rice water-treated kimchi scored higher than did control kimchi using a blind test protocol.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.12
• /
• pp.1847-1855
• /
• 2015

Supercritical carbon dioxide ($SC-CO_2$) treatment has been becoming an important method for substituting the use of organic solvents for samples extraction prior to analysis due to its low toxicity, ease of handling, low cost of disposal etc. Freeze-dried bovine liver was treated with $SC-CO_2$ under different pressures (200, 300, and 450 bar) in order to investigate effects on physicochemical properties and reduction of microbial load. The yield of lipid extraction from bovine liver by $SC-CO_2$ treatment increased with increasing pressure, with values of 84, 86, and 90% in response to 200, 300, and 450 bar, respectively. Results of high performance liquid chromatography analysis showed that vitamin A and coenzyme $Q_{10}$ ($CoQ_{10}$), which is soluble in lipid, were almost removed from bovine liver by $SC-CO_2$ treatment. Saturated fatty acids ratio of bovine liver decreased with increasing pressure, whereas polyunsaturated fatty acids increased with increasing pressure. Total content of amino acids in bovine liver treated by $SC-CO_2$ was less than that of the control sample without treatment. The number of aerobic bacteria in bovine liver, which was stored at $5^{\circ}C$ for 5 days and freeze-dried, decreased from 6.2 to 4.2 log CFU/g by $SC-CO_2$ treatment at 100 bar for 3 h. Interestingly, coliform bacteria were not found in the bovine liver sample by $SC-CO_2$ at 100 bar for 3 h under all storage conditions. This indicates that $SC-CO_2$ treatment can effectively reduce coliform bacteria in the food matrix even at low moisture. In conclusion, freeze-dried bovine liver by proper $SC-CO_2$ treatment may be used as a potential high protein source, with increasing microbial safety and stability of lipid oxidation.

• Horticultural Science & Technology
• /
• v.32 no.5
• /
• pp.645-654
• /
• 2014

This study was conducted to investigate the effect of 1-methylcyclopropene (1-MCP, $1.0{\mu}L{\cdot}L^{-1}$), a known ethylene action inhibitor, on fruit quality and incidence of physiological disorders during a simulated marketing period at $25^{\circ}C$ for 20 days in early-season Asian pear (Pyrus pyrifolia Nakai) 'Hanareum' that had been treated with 0, 0.5, 1.2 or 2.4% $GA_{4+7}$. Weight loss of stored fruits increased with $GA_{4+7}$ concentration, and the 1-MCP treatment slightly reduced the weight loss rates during the marketing period. Flesh firmness decreased abruptly in all 1-MCP-untreated fruits as the storage period extended to 10 d, whereas the firmness of 1-MCP-treated fruits remained high (> 30 N) during 15 days shelf-life. The effect of 1-MCP was significantly reduced when fruits were subjected to increased GA concentration. Higher soluble solids content and acidity during extended shelf-life were also apparent in 1-MCP-treated 'Hanareum' pears. The L-values (lightness) and hue angles of 1-MCP treated samples were higher than those of controls during 20 days shelf-life, but the a-value (redness) was lower in 1-MCP treated fruits. 1-MCP treatment did not decrease the level of ethylene evolution regardless of $GA_{4+7}$ concentration during shelf-life in early-season Asian pear 'Hanareum'. By contrast, 1-MCP treatment decreased the respiration rate significantly during shelf-life. The efficacy of 1-MCP was greatest in the GA-untreated fruit and was reduced as the $GA_{4+7}$ concentration increased. 1-MCP treatment influenced the severity of physiological disorders including core browning and mealiness: 1-MCP treatment completely blocked the incidence of core browning of during 15 days shelf-life, and reduced the severity of mealiness during 20 days shelf-life regardless of $GA_{4+7}$ concentration. Based on our results, we conclude that the use of $1{\mu}L{\cdot}L^{-1}$ 1-MCP can be of great benefit for maintaining quality and preventing physiological disorders in early-season pear cultivar 'Hanareum' pear, whereas its efficacy decreases with the concentration of $GA_{4+7}$ whereas its efficacy gradually decreases when the concentration of $GA_{4+7}$ paste increased.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.1
• /
• pp.41-46
• /
• 1994

This study was undertaken to clarify the effect of killing methods on physical and rheological changes of plaice, Paralichthys olivaceus muscle at early period after death. Plaices killed by the four different methods(1. spiking at the brain instantly. 2. drowning in air. 3. dipping in 1,000ppm ethylaminobenzoate dissolved sea water as an anesthetic. 4. electrifying in sea water.) were stored at $5^{\circ}C$, and the rigor-index and breaking strength through storage were monitored. The longest onset time of rigor-mortis and full rigor was in the samples killed by dipping in sea water with dissolved anesthetic among all samples, where rigor-mortis began at 20hrs after killing and maximum tension was attained after 56hrs. However, in the cases of plaice electrified in sea water or drowned in air, the onset of rigor-mortis began just after killing and maximum tensions were attained after 9hrs and 13hrs, respectively. The level of breaking strength in the muscle of fish killed by spiking the brain instantly was $950.30{\pm}50.23g$, immediately after killing. The value and time reached around the maximum breaking strength for each of the samples were $1,230.60{\pm}30.32g$ and Ohr (immediately after killing) for samples killed by electrifying in sea water, $1,235.83{\pm}35.37g$ and 2.5hrs for drowning samples, $1,186.29{\pm}55.90g$ and 10hrs for spiking samples, and $1,189.67{\pm}50.32g$ and 15hrs for samples dipped in anesthetic, respectively. From the results above, it could be concluded that electrification in sea water is the most effective method in accelerating rigor-mortis and shortening times of reaching the maximum breaking strength of fresh plaice flesh of all the killing methods at early periods after death, whereas dipping in sea water treated with anesthetic was the most effective way in delaying those changes.