• Corrosion Science and Technology
• /
• v.17 no.2
• /
• pp.45-53
• /
• 2018

A new 80Ti-15Ta-5Zr wt% alloy surface was protected by anodic oxidation in phosphoric acid solution. The protective oxide layer (TiO2, ZrO2 and Ta suboxides and thickness of 15.5 nm) incorporated $PO{_4}^{3-}$ ions from the solution, according to high resolution XPS spectra. The AFM analysis determined a high roughness with SEM detected pores (20 - 50 nm). The electrochemical studies of bare and anodically oxidized Ti-15Ta-5Zr alloy in Carter-Brugirard saliva of different pH values and saliva with 0.05M NaF, pointed to a nobler surface for the protected alloy, with a thicker electrodeposited oxide layer acting as a barrier against aggressive ions. The oxidized alloy significantly decreased corrosion current densities and total quantity of ions released into the oral environment in comparison with the bare one, at higher polarisation resistance and protective capacity of the electrodeposited layer. The impedance data revealed a bi-layered oxidation film formed by: a dense, compact, barrier layer in contact with the metallic substrate, decreasing the potential gradient across the metal/oxide layer/solution interface, reducing the anodic dissolution and a more permissive, porous layer in contact with the electrolyte. The open circuit potential for protected alloy shifted to nobler values, with thickening of the oxidation film signifying long-term protection.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.5
• /
• pp.355-359
• /
• 2013

In this paper, the $0.995(Li_{0.04}(Na_{0.56}K_{0.44})_{0.96}(Nb_{0.90}Ta_{0.10})_{0.998}Zn_{0.005}O_3+0.005KNbO_3+xwt%\;TeO_2$ lead-free piezoelectric ceramics for energy harvesting devices were fabricated by the conventional mixed oxide method. The microstructure, dielectric, and piezoelectric properties were investigated as a function of the $TeO_2$ addition. All the specimens showed an orthorhombic phase structure. At the composition ceramics doped with 0.1 wt%$TeO_2$, the optimum values of $d_{33}$= 212 pC/N, $d_{33}{\cdot}g_{33}=9.54pm^2/N$, and kp=0.448 were obtained, respectively. The results indicate that the composition ceramics is a promising candidate for energy harvesting devices applications.

• Environmental Mutagens and Carcinogens
• /
• v.23 no.3
• /
• pp.94-98
• /
• 2003

Quercetin and naringenin are representative flavonoids that not only exert anti estrogenic, cholesterol-lowering and antioxidant activities but also can modulate the metabolism of many xenobiotics. The activity of the specific form(s) of CYP450 is likely to be a major determinant of susceptibility to chemically induced carcinogenesis between which varies among between individuals due to different dietary habits as well as genetic characteristics. People consume cooked meat or fish together with various vegetables containing substantial amounts of quercetin and naringenin that can modify the enzyme activity of CYP1A2 to stimulate or to inhibit the mutagenic activities of HCAs. Heterocyclic amines (HCAs) produced by cooking meat products at high temperatures are promutagens that are activated by cytochrome P450 (CYP) lA2. Using a newly developed Salmonella typhimurium TA1538/1A2bc-b5 strain, we tested the effect of quercetin and naringenin on the mutagenicity of 2-amino-3,4-dimethylimidazo[4,5-f]quinoline (MeIQ). TA1538/1A2bc-b5 bears two plasmids, one expressing human CYP1A2 and NADPH-P450 reductase (NPR), and the other plasmid which expresses human cytochrome b5 (cyp b5). TA1538/1A2bc-b5 cells showed high activities of 7-ethoxyresorufin O-deethylase (EROD) and methoxyresorufin O-demethylase (MROD) associated with CYP1A2 and are very sensitive to mutagenesis induced by several HCAs. MeIQ was found to be the strongest mutagen among the HCAs tested in this system. Mutagenicity of MeIQ was enhanced 50 and 42% by quercetin at 0.1 and 1 mM, respectively, but suppressed 82% and 96% at 50 mM and 100 mM. Naringenin also increased the MeIQ-induced mutation about 37% and 22% at 0.1 and 1 mM, but suppressed it 32% and 63% at 50 mM and 100 mM concentrations, respectively, in TA 1538/1A2bc-b5 cells. Thus, they stimulated the MeIQ induced mutation at low concentrations, but strongly suppressed it at high concentrations. This biphasic effect of flavonoids was due to the stimulation or the inhibition of CYP1A2 activity in a dose-dependent manner judging by the activities of EROD or MROD in the Salmonella cells. Collectively, it is likely that the biphasic effects of quercetin and naringenin on the MeIQ-induced mutagenesis in S. typhimurium TA1538/CYP1A2bc-b5 were due to their differential modification of the CYP1A2 activity in these cells.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.22.1-22.1
• /
• 2009

차세대 CMOS 공정에서 유전상수가 높은 게이트 절연막과 함께 게이트 전극이 관심을 끌고 있다. 게이트 전극은 전도도가 높아야 하고 p-MOS, n-MOS에 맞는 일함수를 가져야 하며 열적 특성이 안정해야 한다. 탄탈룸 계열 탄화물이나 질화물은 게이트 전극으로 관심을 끌고 있는 물질이며 이를 원자층 화학증착법으로 박막화 하는 공정이 관심을 끌고 있다. 원자층 화학공정에서는 전구체의 역할이 중요하며 이의 기상반응 메카니즘, 표면 반응 메카니즘을 제대로 이해해야 한다. 본 연구에서는 TBTDET (tert-butylimido tris-diethylamido tantalum) 전구체의 반응 메커니즘을 FTIR(Fourier Transform Infrared)을 이용해 진단하였다. 또한 수소, 암모니아, 메탄을 이용한 열화학 원자층 증착, 플라즈마 원자층 증착 공정을 수행하여 박막을 얻고 이들의 특성을 평가하였다. 각 공정에 따라 반응 메커니즘이 달라지고 박막의 조성이 달라지며 또한 박막의 물성도 달라진다. 특히 박막에 형성되는 TaC, TaN, Ta3N5, Ta2O5 (증착 후 산소의 유입에 의해 형성됨) 등의 조성이 공정에 따라 달라지며 박막의 물성도 달라진다. 반응메카니즘의 연구를 통해 각 공정에서 어떠한 조성의 박막이 얻어지는 지를 규명하였고 박막의 밀도에 따라 산소유입량이 어떻게 달라지는 지를 규명하였다.

• Environmental Engineering Research
• /
• v.17 no.4
• /
• pp.205-210
• /
• 2012

Hydroperoxyl radical/superoxide anion radical ($HO_2{\cdot}/O_2^-{\cdot}$, $pK_a$=4.8) as an intermediate is of considerable importance in oxidation processes. Hence, the method of detecting $HO_2{\cdot}/O_2^-{\cdot}$ with high sensitivity is necessary to be developed. To achieve this objective, this study newly employed terephthalate (TA) as a probe for the measurement of $HO_2{\cdot}/O_2^-{\cdot}$ in the kinetic method presented in our previous study. This method was based on the hydroxylation of TA to produce mainly hydroxyterephthalic acid or hydroxyterephthalate (OHTA), which was analyzed by fluorescence detection (${\lambda}_{ex}$=315nm, ${\lambda}_{ex}$=425nm). The life-time of $HO_2{\cdot}/O_2^-{\cdot}$ and its concentration formed from the photolysis technique of $H_2O_2$ were reported in this study. At range of pH 2-10, the life-time of $HO_2{\cdot}/O_2^-{\cdot}$ was 51-422 sec. In particular, an increase in the life-time with pH was observed. The sensitivities of the kinetic method by using TA were always higher with 1.7-2.5 times at pH 8.0 than those by using benzoic acid. From these results, this study can contribute to understanding the basic functions of $HO_2{\cdot}/O_2^-{\cdot}$ in oxidation processes.

• Korean Journal of Materials Research
• /
• v.12 no.5
• /
• pp.382-386
• /
• 2002

We studied growth and characterization of $SrBi_2Ta_2O_9$ (SBT) thin films fabricated by low temperature process under vacuum and/or oxygen ambient. A metal organic decomposition (MOD) method based on a spin-on technique and annealing process using a rapid thermal annealing (RTA) method was used to prepare the SBT films. The crystallinity of a ferroelectric phase of SBT thin films is related to the oxygen partial pressure during RTA process. Under an oxygen partial pressure higher than 30 Torr, the crystallization temperature inducing the ferroelectric SBT phase can be lowered to $650^{\circ}C$. Those films annealed at $650^{\circ}C$ in vacuum and oxygen ambient showed good ferroelectric properties, that is, the memory window of 0.5~0.9 V at applied voltage of 3~7 V and the leakage current density of 1.80{\times}10^{-8}$ A/$\textrm{cm}^2$ at an applied voltage of 5V. In comparison with the SBT thin films prepared at 80$0^{\circ}C$ in $O_2$ ambient by furnace annealing process, the SBT thin films prepared at $650^{\circ}C$ in vacuum and oxygen ambient using the RTA process showed a good crystallization and electrical properties which would be able to apply to the virtul device fabrication precess.

• Environmental Analysis Health and Toxicology
• /
• v.18 no.2
• /
• pp.121-129
• /
• 2003

The genotoxicity of pendimethalin [N-(l-ethylpropyl)-2, 6-dinitro-3, 4-xylidine, C$\_$13/H$\_$19/N$_3$O$_4$, M.W.=281.3, CAS No. 40487-42-1], one of selective herbicide, was evaluated in bacterial gene mutation system, chromosome aberration in mammalian cell system and in vivo micronucleus assay with rodent. In bacterial gene mutation assay, pendimethalin revealed dose-dependent mutagenic potential in 313 ∼ 5,000 ${\mu}$g/plate of Salmonella typhimurium TA 98 and TA 1537 both in the absence and presence of S-9 metabolic activation system, and TA 100 only in the absence of S-9 mixture. In the TA 1535, slight increase of revertant was also observed in the presence of S-9 metabolic activation system. No mutagenic potential was observed in the TA 1535 without metabolic activation system and TA l00 in the presence of S-9 mixture. In mammalian cell system using Chinese hamster lung (CHL) fibroblast, no clastogenicity of pendimethalin was observed both in the absence and presence of S-9 metabolic activation system in the concentration range of 2.32∼9.28 ${\mu}$g/ml. And also, in vivo bone marrow micronucleus assay, pendimethalin revealed no clastogenic potential in the dose range of 203∼810 mg/kg body weight after oral administration in mice. Consequently, in vitro chromosome aberration with mammalian cells and in vivo bone marrow micronucleus assay revealed no clastogenic potential of pendimethalin. However, pendimethalin revealed mutagenic potential in bacterial gene mutation assay.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.752-754
• /
• 1998

$Ba(Mg_{(1-x)}Co_x)_{1/3}(Ta_{(1-x)}Nb_x)_{2/3}O_3$ ($x=0.3{\sim}0.6$) ceramics were prepared by the conventional mixed oxide method. The sintering temperature and time were of $1400{\sim}1575[^{\circ}C]$,5[hr.] respectively. The structural and microwave dielectric Properties were investigated with composition ratio and sintering temperature. And then the application for the microwave dielectric resonator was investigated.

• Journal of the Korean Magnetics Society
• /
• v.14 no.5
• /
• pp.163-168
• /
• 2004

We prepared ultra thin film structure of Si(100)/ $SiO_2$(200 nm)/Ta(5 nm)/Ni$_{80}$Fe$_{20/(l～15 nm)}$Ta(5 nm) using an inductively coupled plasma(ICP) helicon sputter. Magnetic properties and cross-sectional microstructures were investigated with a superconduction quantum interference device(SQUID) and a transmission electron microscope(TEM), respectively. We report that NiFe films of sub-3 nm thickness show the B$_{bulk}$ = 0 and B$_{surf}$=-3 ${\times}$ 10$^{-7}$(J/$m^2$). Moreover, Curie temperature may be lowered by decreasing thickness. Coercivity become larger as temperature decreased with 0.5 nm - thick Ta/NiFe interface intermixing. Our result implies that effective magnetic properties of magnetoelastic anisotropy, saturation magnetization, and coercivity may change abruptly in nano-thick films. Thus we should consider those abrupt changes in designing nano-devices such as MRAM applications.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.2
• /
• pp.69-74
• /
• 2007

[ $0.6Pb(Sc_{1/2}Ta_{1/2})O_3-0.4PbTiO_3$ ] (hereafter PSTT) ceramics were prepared by the molten salt synthesis (MSS) method using KCI as a flux. Formation of perovskite phase was investigated by a differential thermal analysis (DTA) and X-ray diffraction (XRD) analysis in the temperature range from $600^{\circ}C$ to $850^{\circ}C$. A 92% perovskite phase was synthesized at $750^{\circ}C$ for 2 hrs using the MSS method, while 82% perovskite phase was synthesized at $850^{\circ}C$ for 4ks using the calcining of mixed oxide (CMO) method. This result could be due to the improvement in reactivity of $Sc_2O_3$ by melting of KCI. The MSS specimen sintered at $1,100^{\circ}C$ for 4hrs showed a dielectric constant of 11,200, a remnant polarization of $13.5{\mu}C/cm^2$ and a coercive field of 10.198 kV/cm, which was discussed in view of the microstructure.