• Polymer(Korea)
• /
• v.31 no.4
• /
• pp.302-307
• /
• 2007

The resistive-type humidity sensors were prepared from the copolymers of [2-[(methacryloyloxy)ethyl]dimethyl]propylamonium bromide (MEPAB), [2-[(methacryloyloxy)ethyl]-2-hydroxyethyl]dimethylammonium bromide (MEHDAB), 2- [(methacryloyloxy)ethyl]trimethylammonium chloride (METAC), and n-butyl methylacrylate (MBA). Four component copolymers MEPAB/BMA/MEHDAB/METAC=4/4/1/1, 3/5/1/1, 2/6/1/1, 1/7/1/1 crosslinked with blocked-isocyanate on Ag/Pd electrode/alumina substrate showed a good durability at high humidities. The various electrical properties such as frequency dependency, temperature dependency, hysteresis, response time and water durability were examined. In the case of copolymer composed of MEPAB/BMA/MEHDAB/METAC=2/6/1/1, the resistance varied from $1.4\;M{\Omega}$ to $2.9\;k{\Omega}$ at $25^{\circ}C$ in the range of $30{\sim}90\;%RH$ and this copolymers showed a good linearity and low hysteresis.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.4
• /
• pp.310-318
• /
• 2015

In this paper, dual-port eFuse OTP (one-time programmable) memory cells with smaller cell sizes are used, a single VREF (reference voltage) is used in the designed eFuse OTP IP (intellectual property), and a BL (bit-line) sensing circuit using a S/A (sense amplifier) based D F/F is proposed. With this proposed sensing technique, the read current can be reduced to 3.887mA from 6.399mA. In addition, the sensing resistances of a programmed eFuse cell in the program-verify-read and read mode are also reduced to $9k{\Omega}$ and $5k{\Omega}$ due to the analog sensing. The layout size of the designed 32-bit eFuse OTP memory is $187.845{\mu}m{\times}113.180{\mu}m$ ($=0.0213{\mu}m2$), which is confirmed to be a small-area implementation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.3
• /
• pp.280-283
• /
• 1999

The experiment was carried out in a 10 $\ell$ vessel in order to evaluate the growth and nutritional quality of rotifer, Brachienus rotundiformis fed by different diets (Freshwater Chlorella, Marine Chlorella and $\omega$-yeast) for the high density cultivation. The maximum densities for the rotifer fed on the marine Chlorella, freshwater Chlorella and $\omega$-yeast were $10,900\~12,400,\;9,190\~10,600$ and 2,390$\~$2,750 inds./ml, respectively. Therefore, the maximum densities for the rotifer fed on the marine Chlorella and freshwater Chlorella were higher than that for rotifer fed on the $\omega$-yeast The essential n-3 highly unsaturated fatty acid in rotifer fed on the marine Chlorella was $8.71\%$ which was slightly lower than that in rotifer fed on the $\omega$-yeast, $9.14\%$, while it was higher than that in the rotifer fed on freshwater Chlorella, $4.45\%$. This result indicated that marine Chlorella could be appropriate diet for the high density cultivation of rotifer.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.3
• /
• pp.313-323
• /
• 2012

The purpose of this study is to evaluate $CO_2$ reduction and the flexural performance of steel wire-integrated void deck plate slabs that were inserted in omega-shaped steel plates to reduce concrete and welded H-section beams. The void deck plate slab can secure the structure, not only reducing the weight of the building but it is also eco-friendly. Therefore, this study evaluated the flexural performance of the composite beam by conducting a monotonic loading test with the use of actuators. It quantitatively evaluated the $CO_2$ emission based on earlier studies. The main test parameters are the concrete thickness of upper slabs, and the interrupted width of the omega-shaped steel plate. The result of the test showed that the welded H-section beam applied steel wire-integrated void deck plate slabs that were inserted into the omega-shaped steel plate declined in flexural performance on the composite beam after reducing concrete volume. Likewise, it is effective in reducing $CO_2$.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.3
• /
• pp.233-240
• /
• 2017

The flowfield around transonic wing-body configuration was simulated using in-house CFD code and compared with the experimental data to understand the influence of several features of CFD(Computational Fluid Dynamics) ; grid dependency, turbulence models, spatial discretization, and viscosity. The wing-body configuration consists of a simple planform RAE Wing 'A' with an RAE 101 airfoil section and an axisymmetric body. The in-house CFD code is a compressible Euler/Navier-Stokes solver based on unstructured grid. For the turbulence model, the $k-{\omega}$ model, the Spalart-Allmaras model, and the $k-{\omega}$ SST model were applied. For the spatial discretization method, the central differencing scheme with Jameson's artificial viscosity and Roe's upwind differencing scheme were applied. The results calculated were generally in good agreement with experimental data. However, it was shown that the pressure distribution and shock-wave position were slightly affected by the turbulence models and the spatial discretization methods. It was known that the turbulent viscous effect should be considered in order to predict the accurate shock wave position.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.2
• /
• pp.9-18
• /
• 1999

The seismic over-strength factor Ω is evaluated for 4-story reinforced concrete buildings in Korea, which has low seismic intensity. For this study, the seismic load suggested in' Aseismic guideline research- phase ll' (in Korea) is used. When 3D study-models are designed, span length and bay number are varied and accidental torsional moment is considered. And the models are analyzed by push-over analysis, in which external and internal frame are connected by rigid-link. As a result of numerical experiments, Ω is increased as the bay number or span length is increased. Because, by the including of accidental torsional moment in designing process, the increased ratio of strength of external columns is larger than the increased ratio of span length or bay number. And this makes the failure mode of model closer or strong-column and weak-beam mechanism.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.261-265
• /
• 2005

The large and polarization-independent photonic bandgap (PBG) is very useful to the application to various optical devices. Until present, it has been known that the PBG for a triangular lattice remains the largest both in the E- and H-polarized modes. However, we proposed a new structure with a larger polarization-independent PBG, by analyzing and systemizing the PBG opening trends as the structural changes. This optimal structure for maximum bandgap has more increased gap-midgap ratio $(\Delta\omega/\omega)$ of about $30\%$ than the triangular lattice.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.403-409
• /
• 2012

Polyurethane prepolymers were prepared from poly (carbonate diol), isophrone diisocyanate, and dimethylol propionic acid. Then, aniline terminated waterborne polyurethane dispersion (ATWPUD) was synthesized by capping aniline on the NCO group of the prepolymer. Subsequently, ATWPUD was mixed with multi-walled carbon nanotube (MWCNT) to yield coating solutions, and the mixture was coated on the polycarbonate substrate. The surface resistance ($10^{7.6}{\sim}10^{7.7}{\Omega}/cm^2$) of coating films from ATWPUD showed better conducting properties than that ($10^{10.9}{\Omega}/cm^2$) from pure waterborne polyurethane dispersion (WPUD) when MWCNT was mixed. Also, the surface resistance of coating films was increased, but the pencil hardness and adhesion were decreased with increasing the amount of MWCNT added in the ATWPUD.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.2
• /
• pp.257-262
• /
• 2002

Effects of dietary fatty acids and vitamin E on antioxidant system were studied in rat liver and serum. Sources of dietary fat (10 wt%) were safflower oil (SO) poor in $\omega$3 fatty acid and mixed oil (MO) with computer-adjusted fatty acid ratios (AA/DHA=1.4, $\omega$6/$\omega$3=6.3, P/M/S=1.0/l.5/1) with (ME) and without (MO) vitamin E (500 mg/kg diet). Rats were fed the three kinds of diet from 3~4 wks prior to the conception. At the age of 3 and 9 wks of the second generation rat, antioxidant vitamins and glutathione peroxidase (GSH-Px), superoxide dismutase (SOD) activities were measured in the liver and serum. The concentrations of $\beta$-carotene were lower in ME than in MO and SO in the liver at the age of 3 wks. It seemed that vitamin E has an inhibitory action on the uptake of $\beta$-carotene or acts as a preferred antioxidant to $\beta$-carotene. The concentrations of lycopene were lower in SO than in MO in the liver at the age of 3 wks. The concentrations of cryptoxanthin showed no significant changes within groups. The activities of GSH-Px tended to increase in ME compared to MO and the ratios of SOD/GSH-Px tended to decrease in ME compared to MO in the liver at the age of 3 weeks. The activities of antioxidant enzyme at the age of 3 weeks and 9 weeks were similar. This suggested that the activity level of antioxidant enzymes reached to the adult level at the age of 3 weeks which is the end point of lactation period.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.142-142
• /
• 2009

Zinc Oxide (ZnO)는 wurtzite 결정구조를 가지고 있으며, 밴드갭 에너지가 약 3.4eV인 산화물 반도체 이다. GaN가 도핑된 ZnO 박막을 Pulsed Laser Deposition (PLD) 법을 이용하여 사파이어 기판과 실리콘 기판에 각각 증착하였다. $500^{\circ}C$의 증착온도에서 1at%~10at%까지의 GaN 도핑농도에 따른 ZnO 박막의 결정성, 성분 분석을 비롯한 전기적 특성을 조사하였다. 첨가된 GaN의 농도에 따라 ZnO 박막의 결정성이 변화하였으며, 농도 변화에 상관없이 ZnO(002) 방향으로 성장함을 알 수 있었다. 또한 실리콘 기판에 증착한 GaN-doped ZnO 박막은 5at%에서 $9.3\;{\times}\;10-3{\Omega}cm$, 10at%에서 $9.2\;{\times}\;10-3{\Omega}cm$의 비저항 값을 가지며 각각 p-type 특성을 나타내었다.