• Journal of the Korean Ceramic Society
• /
• v.24 no.1
• /
• pp.23-32
• /
• 1987

Synthesis of high purity ultrafine Si3N4 and ${\beta}$-Sialon powders was investigated via the simultaneous reduction and nitriding of amorphous SiO2, SiO2-Al2O3 system prepaerd by hydrolysis of alkoxides, using carbonablack as a reducing agent. In Si(OC2H5)4-C2H5 OH-H2 O-NH4OH system, hydrolysis rate increased with increasing reaction temperature and pH. Pure ${\alpha}$-Si3N4 was formed at 1350$^{\circ}C$ for 5 hrs in N2 atmosphere. In Si(OC2H5)4-Al(OC3H7)3-C6H6-H2 O-NH4OH system, weight loss increased as Si/Al ratio decreased. Single phase ${\beta}$-Sialon consisted of Si/Al=2 was formed at 1350$^{\circ}C$ in N2 and minor phases of ${\alpha}$-Si3N4, AIN, and X-phase were existed besides theSialon phase at other Si/Al ratios. The Si3N4 and Sialon powders synthesized from alkoxides consisted of uniform find particles of 0.05-0.2$\mu\textrm{m}$ in diameter, respectively.

• Journal of Power Electronics
• /
• v.18 no.1
• /
• pp.81-91
• /
• 2018

This paper proposes a double line voltage synthesis (DLVS) strategy for three-to-five phase direct matrix converters. In the proposed strategy, the input and expected output voltages are divided into 6 segments and 10 segments, respectively. In addition, in order to obtain the maximum voltage transfer ratio (VTR), the input line voltages and "source key" should be selected reasonably according to different combinations of input and output segments. Then, the corresponding duty ratios are calculated to determine the switch sequences in different segment combinations. The output voltages and currents are still sinusoidal and symmetrical with little lower order harmonics under unbalanced or distorted input voltages by using this strategy. In addition, the common mode voltage (CMV) can be suppressed by rearranging some of the switching states. This strategy is analyzed and studied by a simulation model established in MATLAB/Simulink and an experimental platform, which is controlled by a DSP and FPGA. Simulation and experimental results verify the feasibility and validity of the proposed DLVS strategy.

• Proceedings of the Korean Society of Life Science Conference
• /
• 2004.10a
• /
• pp.22-26
• /
• 2004

A self-replicating RNA ligase ribozyme was converted to a cross-catalytic format whereby two ribozymes direct each other's synthesis from a total of four component substrates. Each ribozyme binds two RNA substrates and catalyzes their ligation to form the opposing ribozyme. The two ribozymes are not perfectly complementary, as is the case for replicating nucleic acid genomes in biology. Rather, the ribozymes contain both template elements, which are complementary, and catalytic elements, which are identical. The specificity of the template interactions allows the cross-catalytic pathway to dominate over all other reaction pathways. In the presence of $2{\mu}M$ each of the corresponding substrates, one ribozyme catalyzes the synthesis of the second ribozyme with an initial rate of $6.8{\times}10^{-3}\;min^{-1}$, while the second ribozyme catalyzes the synthesis of the first with an initial rate of $2.9{\times}10^{-3}min{-1}$. As the concentration of the two ribozymes increases, the rate of formation of additional ribozyme molecules increases, consistent with the overall autocatalytic behavior of the reaction system. Here, I present results that possibly demonstrate a clue for a self-replicating molecule by showing an RNA ligase ribozyme, which is reminiscent of 'Prebiotic Era'.

• Korean Journal of Metals and Materials
• /
• v.50 no.6
• /
• pp.439-443
• /
• 2012

YAG:Ce phosphor were prepared in a self-propagating high-temperature synthesis (SHS) using a $1.5Y_2O_3+2.5Al_2O_3+0.116CeO_2+3.0KClO_3+kCO(NH_2)_2+m(C_2F_4)_n$ precursor mixture. The heat for the combustion propagation was provided by the reaction of a $KClO_3+CO(NH_2)_2+(C_2F_4)n$ mixture. Pure-phase YAG phosphor was synthesized at the combustion temperature of $1210^{\circ}C$ from k=3.6 mole and m=0.3 mole. The as-prepared YAG:Ce phosphor had a particle size of $2-10{\mu}m$. The addition of Teflon to the precursor mixture increased the YAG particle size and its luminescent intensity. The emission peak of the YAG phosphor was blue-shifted with an increase of Teflon concentration.

• Animal cells and systems
• /
• v.1 no.3
• /
• pp.507-513
• /
• 1997

Sequential observations of binding patterns and structural effects of Bacillus thuringiensis var. kurstaki were made on fat body tissue of the fall webworm, Hyphantria cunea Drury. Fat body was cultured in vitro in the presence of purified 62 kDa endotoxin and then examined for protein synthesis and the localization of membrane-bound toxin detected by an antibody against the 62 kDa endotoxin. Protein synthesis was mostly inhibited at concentrations of 15 ${\mu}$g/ml and higher. Immunocytochemical observations suggest that the toxin binds to all exposed basal lamina surrounding the fat body without apparent specificity. The cytopathic effect delectable by scanning electron microscope is disintegration rather than cell swelling. The basal lamina bound toxin was eventually detached from the fat body and followed by an extrusion of cell contents like lipid granules.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.4
• /
• pp.160-164
• /
• 2004

In this study, we demonstrate for the first time a bio-inspired Cell-Microsystem to manipulate and detect living cells. Cultured retinal pigment epithelial cell line (ARPE-19) was directed to grow in a pre-defined Cell-Microsystem. The three-dimensional micropillars of 5 ${\mu}{\textrm}{m}$ in height and diameter of the Cell-Microsystem were fabricated. Inhibited DNA synthesis and transformed cell morphology were observed throughout the culture period. The demonstration of manipulating and detecting living cells by the surface topography is a new approach, and it will be very useful for the future design of cell-based biosensors and bioactuators.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.93.2-93.2
• /
• 2010

Recently, printing and coating technologies application fields have been expanded to the energy field such as solar cell. One of the main reasons, why many researchers have been interested in printing technology as a manufacturing method, is the reduction of manufacturing cost. In this paper, We fabricated CIGS solar cell thin film layer by doctor blade methods using synthesis of CIS precursor nanoparticles ink on molybdenum (Mo) coated soda-lime glass substrate. Synthesis CIS precursor nanoparticles ink fabrication was mixed Cu, In, Se powder and Ethylenediamine, using microwave and centrifuging. Using multi coating process as we could easily fabrication a fine flatness CIS thin-film layer ($0.7{\sim}1.35{\mu}m$), and reduce a manufacture cost and process steps. Also if we use printing and coating method and solution process in each layer of CIGS solar cell (electrode, buffer), it is possible to fabricate all printed thin-film solar cell.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.3
• /
• pp.377-380
• /
• 2006

The semiconductor PbS nanobelts (width 50-120 nm and length over 3 $\mu$m) were self-assembled in a simple reverse micelle solvent system containig the surfactant of polyoxyethylene (9) dodecy ether $(C_{12}E_9)$. The nanobelts synthesized were found to possess cube galena poly-crystal structure with high purity when analyzed by ED and X-ray diffraction. Significant “blue shift” from bulk material was observed on the PbS nanobelts using photoluminescence and UV-Vis spectroscopy. A mechanism involving the possible formation of nanobelts based on surfactant template was also proposed.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2627-2634
• /
• 2012

Strobilurins are one of the most important classes of agricultural fungicides. To discover new strobilurin derivatives with high activity against resistant pathogens, a series of novel ${\beta}$-methoxyacrylate analogues were designed and synthesized by integrating substituted pyrimidine with a strobilurin pharmacophore. The compounds were confirmed and characterized by infrared, $^1H$ nuclear magnetic resonance, elemental analysis and mass spectroscopy. The bioassays indicated that most of the compounds (1a-1h) exhibited potent antifungal activities against Colletotrichum orbiculare, Botrytis cinerea Pers and Phytophthora capsici Leonian at the concentration of 50 ${\mu}g/mL$. Exhilaratingly, compound 1d (R=3-trifluoromethylphenyl) showed better antifungal activity against all the tested fungi than the commercial strobilurin fungicide azoxystrobin.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.12
• /
• pp.1975-1980
• /
• 2005

A series of substituted rutaecarpines were prepared by employing Fischer indole synthesis as key step and their inhibitory activities on COX-1 and 2 as well as selectivity on COX-2 were evaluated. The compounds with a methanesulfonyl and a bromo group at C10 showed promising inhibitory activity ($IC_{50}$ = 0.27, 0.35 $\mu$M, respectively) with selectivity.