• 환경위생공학
• /
• 제11권1호
• /
• pp.63-70
• /
• 1996

The synthesis of high purity and ultra-fine $BaTiO_3$ by precipitation with gaseous $NH_3$ as precipitator was investigated to find an alternative process to solve various problems of recent wet methods. A synthesis process for $BaTiO_3$ powder using $NH_3$ gas as a precipitator in a bubble column reactor was experimentally successful in developing the production process of piezoelectric ceramic $BaTiO_3$ powder. And a 2.33m1/sec is approprite for the feed flow rate, $BaTiO_3$ powder produced under above the condition is spherical type, its particle size was about $0.2{\mu}m$.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권6호
• /
• pp.316-321
• /
• 2000

In this paper, we proposed MBDD(Modified Binary Decision Diagram) as a multi-level logic synthesis method and a vertex of MBDD to NMOS transistors matching. A vertex in MBDD is matched to a set of NMOS transistors. MBDD structure can be achieved through transformation steps from BDD structure. MBDD can represent the same function with less vertices less number of NMOS transistors, consequently capacitance of the circuit can be reduced. Thus the power dissipation can be reduced. We applied MBDD to a full odder and a 4-2compressor. Comparing the 4-2compressor block with other synthesis logic, 31.2% reduction and 19.9% reduction was achieved in numbers of transistors and power dissipation respectively. In this simulation we used 0.8 ${\mu}{\textrm}{m}$ fabrication parameters.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1270-1273
• /
• 2004

The combination of methane-chemical activation and Self-propagating High-temperature synthesis (SHS) has widened the possibilities for both methods. For YBCO systems the investigation showed that a short-term mechano-chemical activation of initial powders before SHS leads to single-phase and ultra-fine products. A new technique for preparation ultra-fine high-temperature superconductors of YBCO composition with a grain size d < $1{\mu}m$ is developed. The specific feature of the technique is formation of the $YBa_2Cu_3O_{7-x}$ crystalline lattice directly from an X-ray amorphous state arising as a result of mechanical activation of the original oxide mixture. The technique allows the stage of formation of any intermediate reaction products to be ruled out. X-ray and magnetic studies of ultra-fine high temperature superconductors (HTS) are carried out. Dimension effects associated with the microstructure peculiarities are revealed. A considerable enhancement of inter-grain critical currents is found to take place in the ultra-fine samples investigated.

• 한국재료학회지
• /
• 제18권3호
• /
• pp.123-127
• /
• 2008

The production of tin oxide ($SnO_2$) microrods on iridium (Ir)-coated substrates was achieved through the thermal evaporation of Sn powders in which a sufficiently high $O_2$ partial pressure was employed. Scanning electron microscopy revealed that the product consisted of microrods with diameters that ranged from 0.9 to $40\;{\mu}m$. X-ray diffraction, high-resolution transmission electron microscopy, and selected area electron diffraction indicated that the microrods were $SnO_2$ with a rutile structure. As the microrod tips were free of metal particles, it was determined that the growth of $SnO_2$ microrods via the present route was dominated by a vapor-solid mechanism. The thickening of rod-like structures was related to the utilization of sufficiently high $O_2$ partial pressure during the synthesis process, whereas low $O_2$ partial pressure facilitated the production of thin rods.

• 한국세라믹학회지
• /
• 제37권8호
• /
• pp.745-750
• /
• 2000

YAG:Tb3+ as green phosphor were studied for the development of low voltage FED phosphor prepared by hydrothermal synthesis. We changed the concentration of luminescence center ion Tb3+ in hydrothermal reaction of which conditions were at 8M NH4OH as mineralizer, at 35$0^{\circ}C$ for 12hrs. As results, we could finally get the YAG:Tb3+ (Y3-xTbxAl5O12) powder of which particle size was about 0.2~1.0${\mu}{\textrm}{m}$. The excitation spectra and the green emitted spectra of YAG:Tb3+ phosphor powder were observed. When we doped 0.25 mol Tb to YAG, we could observe the maximum cathodoluminescence from YAG:Tb3+ phosphor and the chromaticity coordinate of the phosphor was shown x=0.35, y=0.56 in CIE1931 diagram.

• 한국세라믹학회지
• /
• 제37권8호
• /
• pp.739-744
• /
• 2000

YAG(Y3Al5O12) as host material of YAG:Tb3+ was studied via hydrothermal synthesis of metal hydroxides. We changed the kind of mineralizer, the concentrations and process conditions in hydrothermal synthesis. As a result, we found, acicular YAG powders were obtained by the use of KOH as a mineralizer, the concentration of KOH affected the shape and size of YAG powder. Fine grained YAG were perpared by the use of NH4OH as a mineralizer and the concentration of NH4OH affected crystal phases but did not affect particle size. We could finally get the spherical looking YAG powder at 8 M NH4OH and at 35$0^{\circ}C$ for 12h. The average particle size was about 0.2${\mu}{\textrm}{m}$.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.33-41
• /
• 2018

The manuscript reports synthesis of exceptionally stable gold nanoparticles (GNPs) using Momordica charantia fruit extract. The synthesis approach was optimized by refining three experimental variables including source of the fruit extract (peel, seed, and seed coat), pH of the solution, and temperature of the reaction medium. As synthesized GNPs showed excellent stability against various thiolated compounds (e.g., thioglycolic acid, thiourea, ${\text\tiny{L}}-cystine$, 1-dodecanethiol, and cysteamine hydrochloride). Moreover, these nanoparticles showed distinctive colorimetric responses against $Cd^{2+}$ and thiophenol (TP) from their potential interferences. The limit of detection (LOD) values for $Cd^{2+}$ and TP were determined as 0.186 and $0.154{\mu}M$, respectively.

• The Korean Journal of Ecology
• /
• 제13권1호
• /
• pp.19-24
• /
• 1990

The effects of insect growth regulator Dimilin which interfere with the synthesis of chitin in the cuticle of insect larvae were investigated at various concentrations using the crab larvae of Hemigrapsus sanguineus. The larvae were cultured at control, 0.5, 1, 5 and 10 $\mu g$ Dimilin solutions and three replicate experiments were carried out to give correct analysis. Significant differences in percent mortality have occurred between control and 10$\mu g$ when the larvae were exposed to Dimilin whereas no differences were found between 5 and 10$\mu g$ Dimilin concentrations. If lethal concentration is defined as concentration at which less than 10 percent of crab larvae reach to the last zoeal stage from hatching it can be concluded that insect growth regulator Dimilin is lethal to the larvae of Hemigrapsus sanguineus at 5 and 10$\mu g$ Dimilin.

• Journal of Preventive Medicine and Public Health
• /
• 제29권3호
• /
• pp.495-505
• /
• 1996

수은이 세포성 면역반응에 미치는 효과와 그 기전을 밝히기 위해 cytokine-EMT-6 cell-NO 모형에 대조군에는 수은을 첨가하지 않았고 나머지 실험군에는 $0.05-0.8{\mu}M$의 mercury chloride를 처리하였다. 그리고 배양시간별, 수은농도별로 세포생존율, 세포성 면역의 지표인 NO를 nitrite로 간접정량하고 대사과정에 필수 에너지요소인 nitrite를 측정한 결과는 아래와 같이 요약된다. 1. EMT-6세포의 세포생존율은 대조군과 36시간째 $0.8{\mu}M(89.50%)$을 제외한 모든 수은첨가군에서 모두 90%이상의 값을 나타내었으며, 배양시간 및 첨가한 수은농도별 군간 차이는 없었고 모든 수은첨가군과에서 대조군에 비해 큰 차이가 없었다. 2. 수은에 노출된 EMT-6 세포의 nitrite 생성량 및 ATP생성량은 배양시간의 경과에 따라 전반적으로 증가하였으며 시간경과에 따른 nitrite 생성량과 ATP 생성량은 첨가한 수은농도의 변화에 따라 각 군간에 현저한 차이를 보였다. 그리고 시간경과의 영향을 보정한 상태에서도 첨가한 수은농도의 변화에 따라 각 군간 차이는 모두 현저하게 나타났다. 한편, Nitrite 생성량과 ATP 생성량은 둘 다 수은첨가군 모두에서 대조군의 값에 비해 현저하게 낮았고, 첨가된 수은농도와 nitrite 생성량 및 ATP 생성량 사이에는 높은 음의 상관관계가 있어 수은농도의 증가에 따라 용량-반응의 관계(dose-dependent)로 감소하는 경향을 보였다. 이상의 결과, 배양조건에 수은의 첨가로 인하여 nitrite 생성량과 ATP 생성량이 동시에 감소하는 바, 수은에 의한 세포성 면역의 저하는 면역세포의 NO 생성량의 감소에 의한 것으로 사료되며, 이는 수은이 세포내 에너지생산에 관련된 대사과정을 억제시키므로 나타나는 결과라고 판단된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권6호
• /
• pp.820-828
• /
• 2011

에너지 절약은 해상운송분야에서 이익을 내기 위한 가장 중요한 요인 중 하나이다. 연료 소비율을 낮추기 위해서는 가능한 한 선박의 추진효율을 높여야만 한다. 추진효율은 추진기관과 낮은 회전속도에서 더 좋은 효율을 갖는 프로펠러의 조합에 의존한다. 기관은 저속이 될수록 연료분사과정에서의 지연시간으로 인해 회전 토크 변동이 심해진다. 본 연구에서는 강인 제어이론을 적용하여 강인 안정성과 강인 성능을 고려한 기관 속도제어기들, 즉 준최적 $H_{\infty}$제어기, $H_{\infty}$루프-성형 제어기 및 ${\mu}$-제어기를 설계한다. 컴퓨터 시뮬레이션 결과로부터 이들 3가지 제어기의 타당성을 검토한다.