• 한국추진공학회지
• /
• 제6권1호
• /
• pp.1-11
• /
• 2002

Thermal stripping을 수반한 난류유동장에 대한 해석방법론 정립에 필요한 신뢰성 있는 난류모델을 선정하기 위하여 온도변화가 있는 비정상 난류유동장에 $\kappa$-$\varepsilon$ 모델, 수정 $\kappa$-$\varepsilon$ 모델, 그리고 full Reynolds stress(FRS) 모델을 적용하였다. 검증대상으로는 thermal stripping 현상이 자주 관찰되는 원자로 혹은 추진기구부 등에서 보이는 수직평판과 수평평판에 대한 제트유동이 있는 유동장을 선정하였으며 이 때의 유체로는 물 혹은 액체나트륨을 사용하였다. 분석결과 비정상 난류유동장은 FRS를 사용하여 3-D로 해석할 때 가장 나은 결과를 얻을 수 있었다. 그러나 경계면 부근을 비롯한 유동장내에서의 열전달 특성 분석의 정확성을 제고하기 위해서는 이를 위한 수정모델의 도입이 요구된다. 아울러 제트유동의 운동량이 thermal stripping 현상에 미치는 영향을 평가하기 위하여 제트유동의 유속을 변화시켜 이에 따른 영향을 점검한 결과 운동량의 증가는 유동장의 혼합능력을 증가시키고 온도변화 진폭을 상승시키는 것으로 나타났다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.775-780
• /
• 2008

This paper reports on the internal flow of a centrifugal mini pump working at the low flow rate operating conditions. The RNG $\kappa-\varepsilon$ turbulence model was employed to simulate the three-dimensional turbulent flow in the pump. To examine and certify the simulation results, a transparent acrylic centrifugal mini pump model which is suitable for PIV measurement has been developed. The tongue region and the passages region between blades were investigated using PIV. In order to eliminate the effect of refraction on the area closed to the wall and increase the measurement accuracy, the fluorescent particles were scatted into the working fluid with the tracing particles. It is found from the calculation and PIV measurement results that there is a large area of recirculation flow near the tongue at low flow rate operating conditions. The computationally predicted water head using the $\kappa-\varepsilon$ turbulence model at low flow rate operating conditions are in very good agreement with the experimentally measured water head and the mean velocity distributions at investigation area obtained by PIV and calculation showed a satisfactory agreement as well. Meanwhile, the results of PIV measurements show that the flow status in one passage is different to another. And for capturing the internal flow detail information, the $\kappa-\varepsilon$ turbulence model is not very suitable.

• 대한토목학회논문집
• /
• 제29권3B호
• /
• pp.231-237
• /
• 2009

본 연구에서는 2-방정식 난류모형인 ${\kappa}-{\varepsilon}$ 모형을 이용하여 2차원적으로 발달하는 하층 밀도류를 모의하기 위한 수치모형을 제시하였다. 타원형 편미분 방정식으로 흐름에 대한 지배방정식을 구성하였으며, 수치기법으로는 유한체적법을 사용하였다. 연구를 통해 개발된 수치모형을 기존의 실험결과와 비교하여 적용성을 검토하였다. 불연속 유입조건 밀도류의 시간별 진행에서 흐름의 불안정에 의한 와(渦)의 발생을 확인하였으며, 진행중인 불연속 유입 밀도류의 진행단계 변화와 선단부 속도의 관계를 살펴보았다. 또한, 무거운 유체 위로 이동하던 주변수체가 벽면을 접하면서 발생된 단파가 밀도류의 진행에 미치는 영향을 수직구조를 통해 살펴보았다. 한편, 개발된 모형을 이용한 수치모의에서 선단부의 진행 속도가 실험보다 느리게 모의되었다. 이는 3차원 현상인 난류의 불안정성을 모의하는 2차원 모형의 한계인 것으로 판단된다.

• Wind and Structures
• /
• 제1권4호
• /
• pp.337-349
• /
• 1998

A numerical and experimental study was performed for the wind flow field in one area, comprising a group of several pavilions separated by passageways, of the EXPO '98 - a World Exposition (Lisbon, Portugal). The focus of this study is the characterization of the flow field to assess pedestrian comfort. The predictions were obtained employing the Reynolds averaged Navier-Stokes equations with the turbulence effects dealt with the ${\kappa}-{\varepsilon}$ RNG model. The discretization of the differential equations was accomplished with the control volume formulation in a Cartesian coordinate system, and an advanced segregated procedure was used to achieve the link between continuity and momentum equations. The evaluation of the overall numerical model was performed by comparing its predictions against experimental data for a square cylinder placed in a channel. The predicted values, for the practical geometry studied, are in a good agreement with the experimental data, showing the performance and the reliability of the ${\kappa}-{\varepsilon}$ RNG model and suggesting that the numerical simulation is a reliable methodology to provide the required information.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.321-328
• /
• 2009

Free surface impinging jet on a moving plate, which is applicable to cooling of hot metals in a steel-making process, is investigated numerically by solving the Navier-Stokes equations in the liquid and gas phases. The free surface of liquid-gas interface is tracked by a level-set method which is improved by incorporating the ghost fluid approach based on a sharp-interface representation. The method is further improved by employing a nonequilibrium $\kappa-\varepsilon$ turbulence model including the effect of low Reynolds number. The computations are made to investigate the effects of the nozzle pitch, moving velocity of plate and jet velocity on the interfacial motion and the associated flow and temperature fields.

• 물과 미래
• /
• 제29권2호
• /
• pp.221-233
• /
• 1996

2차원 표층밀도분류의 특성을 동역학적으로 구명하기 위해 수치해석을 할 경우고려해야 할 가장 중요한 문제는 성층상태에서 난류수송의 평가와 자유수표면의 처리이다. 본 연구에서는 2차원 표층밀도분류에 대한 내부흐름의 연직방향구조를 동역학적으로 구명하기 위해서 비정수압 근사 및 대수응력모형(ASM) 을 사용하여 SIMPLE로 알려진 수치모형을 적용하였다. $\kappa-\varepsilon$모형의 결점인 난류의 이방성을 고려한 대수응력 모형(ASM)을 사용한 2차원 표층밀도분류 수치모형은 밀도계층에 포획감쇠 및 자유수면에서 난류구조를 보다 정확하게 규명할 수 있었다. 대수응력모형(ASM)에 의한 유동장의 계산결과는 $\kappa-\varepsilon$ 모형에 의한 결과와 비교하여 상당히 개선되였으며, 수리실험 결과와 잘 일치하여 모형의 적용성이 검증되었다.

• 한국해양공학회지
• /
• 제22권3호
• /
• pp.24-33
• /
• 2008

In this study, flow and creation and dissipation of vorticity around rectangular floating breakwater is investigated both experimentally and numerically. The PIV system(Particle image velocimetry) is employed to obtain the velocity field in the vorticity of rectangular structure. The numerical model, combined with ${\kappa}-{\varepsilon}$ turbulence model and the VOF method based on RANS equation, is used to analyze the turbulence structure. In the results of this study, the vorticity is found around conner of rectangular structure at all time domain, and creation and dissipation of vorticity are closely related to wave period. Separation points of phase of vortex due to flow separation for longer period waves are faster then for shorter period waves.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.43-45
• /
• 2003

Nonlinear relationship between Reynolds stresses and the rate of strain for nonlinear${\kappa}-{\varepsilon}$ turbulence models is validated theoretically by using the boundary layer assumptions against the turbulence­driven secondary flows in noncircular ducts and then the prediction performance for several nonlinear models is evaluated numerically through the application to the turbulent flow in a square duct.

• 설비공학논문집
• /
• 제6권4호
• /
• pp.325-336
• /
• 1994

A numerical simulation of velocity and temperature fields and Nusselt number distributions is performed by using the algebraic stress model (ASM) for the velocity profiles and low Reynolds number ${\kappa}-{\varepsilon}$ model and the algebraic heat flux model(AHFM) for turbulent heat transfer in a $180^{\circ}$ bend with a constant wall heat flux. In the low Reynolds number ${\kappa}-{\varepsilon}$ model, turbulent Prandtl number is modified by considering the streamline curvature effect and the non-equilibrium effect between turbulent kinetic energy production and dissipation rate. Every heat flux term presented in the transport equation of turbulent heat flux is reduced to algebraic expressions in a way similar to algebraic stress model. Also. in the wall region, low Reynods number algebraic heat flux model(AHFM) is applied.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 춘계 학술대회논문집
• /
• pp.142-147
• /
• 2007

The realizability condition has been applied to modern turbulence models, Simulations are performed to compare ${\kappa}-{\omega}$ turbulence models imposing the realizability condition. An improvement to the ${\kappa}-{\varepsilon}$ turbulence model is also presented and shown to lead to better agreement with data for supersonic base flows. The improvement is achieved by imposing a grid-independent realizability constraint in the Launder-Sharma ${\kappa}-{\varepsilon}$ model. Numerical results for several test problems show a critical role of the realizability constraint in the prediction of separated flows.