• 대한의생명과학회지
• /
• 제18권2호
• /
• pp.175-179
• /
• 2012

It is desirable that a wound healing membrane acts as a barrier for coverage of a damaged skin and has the biological activities such as anti-inflammatory effects. In this study, we prepared the hydrogel film containing the propolis nanoparticles as a wound healing membrane. The propolis nanoparticles were prepared by incorporation of propolis into the hydrophobic core of ${\gamma}$-cyclodextrin. The incorporation efficiency of propolis in the nanoparticles was $50{\pm}2.3%$. Propolis nanoparticles observed by a scanning electron microscope (SEM) were spherical with the size of 30~40 nm. The swelling behaviors of the hydrogel film containing propolis nanoparticles showed a similar pattern with the hydrogel film without propolis nanoparticles. The cumulative amount of propolis released from the hydrogel film containing propolis nanoparticles in the buffer of pH 7.4 and 5.5 was $86.0{\pm}2.0%$ and $64.6{\pm}1.0%$ of total propolis loaded in the hydrogel film within 9 h, respectively. These results provide a rationale for studying wound healing application of the hydrogel film containing propolis nanoparticles in a clinical setting.

• 한국식품과학회지
• /
• 제30권2호
• /
• pp.283-287
• /
• 1998

발아억제 선량범위인 0.15 kGy와 0.30 kGy의 감마선과 전자선이 조사된 감자와 마늘을 대상으로 thermoluminescence (TL) 측정에 의해 방사선 조사유무를 확인하였다. 감자와 마늘로부터mineral을 추출하여 TL 측정을 함으로써 방사선 조사선량과 TL intensity 간의 높은 상관관계를 확인하였다. 방사선 조사되지 않은 시료들은 특이한 TL glowcurve를 나타내지 않았으나 방사선 조사된 시료들은 $200{\sim}260^{\circ}C$부근에서 명확한 TL glowcurve를 나타내었다. 시료의 TL intensity는 조사선량에 따라 증가하였으나 같은 조사선량에서도 방사선 조사선원에 따라 시료의 TL intensity는 일정하지 않았다. 그러나 이상의 결과에서 볼 때 발아억제를 위한 감자와 마늘의 방사선 조사는 TL glowcurve의 측정으로써 조사유무의 확인이 가능하였다.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2011년도 제44차 학술발표회
• /
• pp.31-31
• /
• 2011

Lanasol dyes containing ${\alpha}$-bromoacrylamide or ${\alpha},{\beta}$-dibromopropionylamide group are used for wool dyeing. They are normally applied to wool under pH 4.5 to 6.5 at $100^{\circ}C$. Although wool fabric can be dyed to obtain deep colour, high light and wet fastness, the dyeing processes need long dyeing time at high temperature, with salt addition, which inevitably causes environmental problems. Grafting is a modification method for textile where monomers are covalently bonded onto the polymer chain. It can be initiated by ozone, ${\gamma}$ rays, electron beams, plasma, corona discharge and UV irradiation. Coloration by UV-induced photografting exhibits several advantages such as fast reaction rate, energy saving, simple equipment, easy exploitation and environmentally friendliness. Also it requires much lower energy compared to the conventional dyeing and less damage to the substrate. In this study, a direct sequential UV-induced photografting onto wool fabrics was discussed. To understand the graft polymerization mechanism further, several characterization methods were used. Moreover, the effects of several principal factors on the graft photopolymerization were investigated. Furthermore, the colorfastness results were compared with conventional dyeing methods.

• 신재생에너지
• /
• 제3권1호
• /
• pp.54-59
• /
• 2007

A sintering aid, $B_{2}O_{3}$ have been included into a $LiAlO_{2}$ electrolyte support by a tape casting method in order to reinforce mechanical strength of the support for molten carbonate fuel cells [MCFCs). Starting idea originates from the low melting point of $B_{2}O_{3}$ ($450^{\circ}C$), which can provide the low temperature consolidation of ceramic materials. The mechanical properties and the microstructure changes of the $B_{2}O_{3}$-included electrolyte support were examined by scanning electron microscope, mercury porosimetry, X-ray powder diffraction [XRD], high temperature differential scanning calorimeter and three-point bending strength measurement. The mechanical strength was clearly improved by addition of $B_{2}O_{3}$. The increase of mechanical strength results from the neck growth of a new $LiAlO_{2}$ phase between $LiAlO_{2}$ particles by the liquid phase sintering. Average pore size and porosity of the electrolyte support reinforced by addition of the sintering aid, $B_{2}O_{3}$, was $0.24{\mu}m$ and 59%, respectively which were suitable microstructure of a matrix for an application of MCFCs.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.220-224
• /
• 2009

The effect of addition of single and binary additives on the performance of dye-sensitized $TiO_2$ solar cells based on 1,2-dimethyl-3-propylimidazolium iodide (DMPII) in ethylene carbonate (EC) and gamma-butyrolactone (GBL) has been evaluated at different cell temperatures in the $30-120^{\circ}C$ range. The electrolyte containing a single additive, 2-(dimethylamino)-pyridine (DMAP) showed best performance, which showed further enhancement for an electrolyte containing binary additives, DMAP and 5-chloro-1-ethyl-2-methylimidazole (CEMI) in equal molar ratio. The performance of the dye sensitized solar cell (DSC) based on electrolyte containing binary additives were found to be better than an acetonitrile based electrolyte. The dependence of different photovoltaic parameters (Voc, Jsc, ff, n) of the DSC upon temperature has been studied over the $30-120^{\circ}C$ range and only a small decrease in conversion efficiency has been observed. Thus the electrolyte containing binary additives (DMAP, CEMI) in EC/GBL solvent and show better performance in the investigated temperature range ($30-120^{\circ}C$).

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1215-1217
• /
• 2005

One of the important problems in recent AC-PDP technology is the image sticking. In this research, we have investigated the PDP cell with constraint deposition MgO on phosphor, the electrical and optical properties in the PDP cell were examined. Also, we have investigated the correlation with image sticking and degraded MgO protective layer, phosphor in AC-PDP. As a result, we measured the secondary electron emission coefficient ${\gamma}$, discharge characteristics and Brightness for the constraint degraded phosphor are compared with those of nondegraded phosphor.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1137-1140
• /
• 2002

A V-band low-noise amplifiers (LNA) based on the Millimeter-wave monolithic integrated circuit (MIMIC) technology were fabricated using high performance 0.1 $\mu\textrm{m}$ $\Gamma$-shaped pseudomorphic high electron mobility transistors (PHEMT＇s), coplanar waveguide (CPW) structures and the integrated process for passive and active devices. The low-noise designs resulted in a two-stage MIMIC LNA with a high S$\sub$21/ gain of 14.9 dB and a good matching at 60 ㎓. 20 dBm of IP3 and 3.9 dB of minimum noise figure were also obtained from the LNA. The 2-stage LNA was designed in a chip size of 2.3 ${\times}$1.4 mm$^2$by using 70 $\mu\textrm{m}$ ${\times}$2 PHEMT’s. These results demonstrate that a good low-noise performance and simultaneously with a high gain performance is achievable with GaAs PHEMT's in the 60 ㎓ band.

• Journal of Radiation Protection and Research
• /
• 제7권1호
• /
• pp.49-55
• /
• 1982

유기중합체의 열자극전류는 방사선량측정기로서 사용가능한 특성을 갖고있으며 중합체의 구성성분이 생체조직과 등가성분이므로 의학 및 생물학분야에서 효과적인 방사선 측정기구로 이용할 수 있었다. 포리에틸렌등 중합체에 방사선을 조사한후 $10{\sim}100V$의 전압과 실온에서 $100^{\circ}C$까지의 온도에 따라 열자극 전류를 측정하고 분석함으로서 물질의 에너지상수($0.8{\sim}1.0eV$)와 방사선피폭량(수Krands)에 따른 열자극전류($10^{-2}{\sim}10^{-4}{\mu}A$)의 상호관계를 계측할 수 있었다.

• Nuclear Engineering and Technology
• /
• 제41권1호
• /
• pp.107-112
• /
• 2009

Corrosion of nickel-base alloys (Hastelloy C-276, Inconel 625, and Inconel X-750) in $500^{\circ}C$, 25MPa supercritical water (with 10 wppb oxygen) was investigated to evaluate the suitability of these alloys for use in supercritical water reactors. Oxide scales formed on the samples were characterized by gravimetry, scanning electron microscopy/energy dispersive spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The results indicate that, during the 1000h exposure, a dense spinel oxide layer, mainly consisting of a fine Cr-rich inner layer ($NiCr_{2}O_{4}$) underneath a coarse Fe-rich outer layer ($NiFe_{2}O_{4}$), developed on each alloy. Besides general corrosion, nodular corrosion occurred on alloy 625 possibly resulting from local attack of ${\gamma}$" clusters in the matrix. The mass gains for all alloys were small, while alloy X -750 exhibited the highest oxidation rate, probably due to the absence of Mo.

• 대한방사선기술학회지:방사선기술과학
• /
• 제18권1호
• /
• pp.97-110
• /
• 1995

This study was undertaken to investigate ultrastructural changes according to the radiosensitivity in the spermatogenic cells and Sertoli cell of the seminiferous tubules in Korean native pheasants. During spermatogenetic period, testes were collected from male adult Korean native pheasant and they were used as experimental and control birds. The experimental group was divided into a single-dose whole body irradiation group (400, 600, 800 and 1,000 rads) and a split-dose whole body irradiation groups(400/2, 600/2, 800/2 and 1,000/2 rads). The experimental birds were sacrificed at 24 and 72 hrs after irradiation and the control pheasants were sacrificed at the same time. Ultrastructural changes of Sertoli cells and spermatogonia were investigated by ultrathin section with electron microscope. The results obtained are summarized as follows; 1. The apoptosis was observed after 72 hrs group of the single-dose irradiation of 400 rads. 2. The cytoplasmic organelles of spermatogonia were severely damaged more than that of sertoli cell in 72 hours group of split-dose irradiation of 800 rads. 3. The cytoplasmic organelles of Sertoli cell were severely damaged except the nuclear membrane of Sertoli cells in 72 hrs group of split-dose irradiation of 1,000 rads.