• 대한전자공학회논문지
• /
• 제27권9호
• /
• pp.1393-1401
• /
• 1990

The physical properties of \ulcorner-Fe2O3 raw materials were investigated. \ulcorner-Fe2O3/Pd thick film gas sensors were fabricated with screen-printing method and their electrical and sensitivity characteristics were analyzed. The irreversible phase transition from \ulcorner-Fe2O3 to \ulcorner-Fe2O3 occured at 500\ulcorner. At this time, the cation of tetrahedral sites moved into the octahedral sites. \ulcorner-Fe2O3 raw materials contained only trivalent and no divalent iron. Thecontents of divalent iron (Fe+\ulcorner were increased as detecting gases were adsorbed. The addition of Pd (1w/o) to \ulcorner-Fe2O3 enhanced the sensitivity to gases. The sentivity of \ulcorner-Fe2O3/Pd(1w/o) thick film to 5000ppm C4H10 was 97% at the operating temperature of 300\ulcorner.

• 한국재료학회지
• /
• 제16권12호
• /
• pp.739-742
• /
• 2006

The ${\gamma}-Fe_2O_3$ nano particles in the size range of $5{\sim}30$ nm were prepared by a chemical coprecipitation method. The nano particles were coated with 2nd surfactants for obtaining the water-based. The size effect of ${\gamma}-Fe_2O_3$ nano particles for the ultraviolet protection was investigated. The variation of the UV-Vis transmittance spectra as a function of wavelength for a ${\gamma}-Fe_2O_3$ nano particles were showed red-shifted increase with the particle size. The protective effects of UVA onset at near 469, 494, 591 nm for a particle size of 8.7, 9.1 and 12 nm. It is shown that the ${\gamma}-Fe_2O_3$ nano particles was good materials for protect of UV.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.87-87
• /
• 2003

• 한국세라믹학회지
• /
• 제31권3호
• /
• pp.235-240
• /
• 1994

The electric and magnetic properties of Mg1.9-2xMn0.05Fe4xO4+${\gamma}$+2wt% Al2O3, and its microstructure have been investigated as a function of ferrite composition (x=0.45, 0.5, 0.55). The microstructure turned out to be independent on the ferrite composition. The resistivity was decreased with increasing Fe contents, whereas the Curie temperature decreased. Saturation magnetization was varied from 1741 to 2022 G with composition, and squareness ratio (SR), coercive force (BHc) were decreased and increased with increasing Fe contents respectively, so the sample which SR and BHc were 0.97 Oe and 1.49 Oe can be attainable at x=0.45.

• Bulletin of the Korean Chemical Society
• /
• 제21권12호
• /
• pp.1233-1238
• /
• 2000

$Mo/{\gamma}-Al_2O_3catalysts$ modified with Fe, Co, and Ni were prepared by impregnation method and catalytic activity for water gas shift reaction was examined. The optimum amount of Mo loaded for the reaction was 10 wt% $MoO_3$ to ${\gamma}-Al_2O_3.$ The catalytic activity of $MoO_3/{\gamma}-Al_2O_3was$ increased by modifying with Fe, Co, and Ni in the order of Co${\thickapprox}$ Ni > Fe. The optimum amounts of Co and Ni added were 3 wt% based on CoO and NiO to 10 wt% $MoO_3/{\gamma}-Al_2O_3$, restectively. The TPR (temperature-programmed reduction) analysis revealed that the addition of Co and Ni enganced the reducibility of the catalysts. The results of both catalytic activity and TPR experiments strongly suggest that the redox property of the catalyst is an important factor in water gas shift reaction on the sulfided Mo catalysts, which could be an evidence of oxy-sulfide redox mechanism.

• Corrosion Science and Technology
• /
• 제2권3호
• /
• pp.148-154
• /
• 2003

The addition of Ni leads to the formation of protective rust layer on steel and subsequently high corrosion resistance of steel in $Cl^-$-containing environment. $\alpha$-FeOOH, $\beta$-FeOOH, $\gamma$-FeOOH and $Fe_3O_4$ are formed mainly on steels exposed to $Cl^-$-containing environment. As the first work of this kind, this study reports the influence of Ni on the oxidation behavior of $Ni_xFe_{1-x}(OH)_2$ in $Cl^-$-containing solution at two different pH regions(condition I under which the solution pH is allowed to decrease and condition I under which solution pH is maintained at 8) where $\gamma$-FeOOH and $Fe_3O_4$ are predominantly formed, respectively, upon oxidation of $Fe(OH)_2$, In the presence of Ni(II) in the starting solution, the formation of $\beta$-FeOOH was facilitated and the formation of $\gamma$-FeOOH was suppressed with increasing Ni(II) content and with increasing oxidation rate of Fe(II). Ni(II) was found to have $Fe_3O_4$-suppressing effect under condition II.

• 한국자기학회지
• /
• 제2권1호
• /
• pp.15-21
• /
• 1992

침상형의 ${\gamma}-Fe_{2}O_{3}$ 입자를 $Co^{+2}/Fe^{+2}$의 몰비가 0.5인 2가 금속혼합용액을 함유하는 알카리성 용액에서 $90^{\circ}C$로 가열하였다. 코발트 함량이 증가함에 따라 생성물의 보자력은 거의 직선적으로 증가하였으며 비표면적은 감소하였다. 코발트 훼라이트는 ${\gamma}-Fe_{2}O_{3}$ 결정 표면상에 에피탁시얼하게 성장되며, 보자력의 증가는 피착층인 코발트 훼라이 트의 결정 자기이방성에 기인하는 것으로 사료된다. 당량비 2이상에서 우수한 자기적 특성을 기대할 수 있 었으며 반응공정도 코발트 훼라이트 에피탁시얼 산화철의 보자력 특성에 영향을 미친다. $Co-{\gamma}-Fe_{2}O_{3}$의 온도 및 경시변화에 대한 안정성은 피착층 조성에 의해 크게 지배된다.

• 한국자기학회지
• /
• 제22권5호
• /
• pp.167-172
• /
• 2012

본 연구에서는 $Fe(OL)_3$ 전구체가 고온에서 열분해 한 후 산화철 나노입자를 형성하는 메커니즘을 분석하기 위하여 전구체의 온도에 따른 열유속을 측정하였으며, 반응 과정에서 순차적으로 채취한 반응 원액의 TEM 및 교류 자화율을 측정 하였다. $Fe(OL)_3$는 고온에서 OL-chain 두 개가 순차적으로 분리되어 Fe-OL 단량체(monomer)가 되고, 이들이 산화철 나노입자 형성에 기여하게 된다. 또한 산화철 나노입자는 초기 성장 과정에서 ${\gamma}-Fe_2O_3$ 구조를 갖는 나노입자를 형성하지만, 나노 입자들이 급격히 성장할 때는 공급되는 산소량의 부족으로 인하여 FeO가 형성되어 ${\gamma}-Fe_2O_3$-FeO의 core-shell 구조를 갖는 나노입자들이 합성된다. 이러한 산화철 나노입자들을 고온에서 장시간 유지시키면 부족한 산소를 점차적으로 보충하여 $Fe_3O_4$ 구조를 갖는 나노입자로 변화한다. 따라서 포화자화량이 높고 공기 중에서 안정한 $Fe_3O_4$ 나노입자는 고온 열분해법을 이용하여 쉽게 제조할 수 있다.

• 한국안전학회지
• /
• 제5권2호
• /
• pp.32-39
• /
• 1990

The ${\gamma}$-Fe$_2$O$_3$ compounds were oxidized in the furance after gas detecting sensor made molding as the Fe$_3$O$_4$ the synthesized Fe$_3$O$_4$, by ferrous sulfate and sodium hydroxide. Their sensities on carbon monoxide, ethyl alcohol and L. P. G. were measured at various temperatures, respectively. And then their electrical resistivities, thermal properties (D.T.A. ＆ T.G.A.), were examined about their having an effet on the gas-sensing in company with the effect of pure ${\gamma}$-Fe$_2$O$_3$ and the detecting sensor ${\gamma}$-Fe$_2$O$_3$, which reacts with $K_2$CO$_3$ in the hydrothermal coundition, and the electrical conductive mechanism was reflected simultaneously. It was observed that the electrical conductivities and response ratios showed highest value at the endothermic temperature part, 300~35$0^{\circ}C$ of D.T.A.―curve. Consequently, the response ratios and response times of the hydrothermal detecting sensor were higher than that of pure detecting sensor, the specific surface areas were the highest at the endothermic range of D.T.A.-curve. These response ratios of detecting sensor for $K_2$CO$_3$, process at hydrothermal condition on carbon monoxide appeared higher than that on ethyl alcohol and in case of L.P.G. last.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2001년도 춘계학술발표강연 및 논문개요집
• /
• pp.29-29
• /
• 2001