• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.3
• /
• pp.316-325
• /
• 1986

Characteristics of fatigue crack propagation in martensite-ferrite duel phase steels have been investigated. In low .DELTA.K region, fatigue crack propagation resistance increases with increasing volume fraction of martensite, but the difference of crack propagation resistance resulted from the volume fraction decreases with increasing .DELTA.K. Also, threshold stress intensity factor range .DELTA.K$_{th}$ increases with increasing volume fraction of martensite, But fatigue crack propagation rates of dual-phase steels in terms of .DELTA.K$_{eff}$ are independent to volume fraction of martensite. These phenomena can be explained by the roughness induced crack closure due to crack deflection.n.n.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1208-1211
• /
• 2003

High quality $Bi_2Sr_2Ca_nCu_{n+1}O_x$ superconducting thin films fabricated by using the evaporation method at various substrate temperatures, $T_{sub}$, and ozone gas pressures, $pO_3$. The correlation diagrams of the $Bi_2Sr_2Ca_nCu_{n+1}O_x$ phases with $T_{sub}$ and $pO_3$ are established in the 2212 and 2223 compositional films. In spite of 2212 compositional sputtering, Bi2201 and Bi2223 as well as Bi2212 phases come out as stable phases depending on $T_{sub}$ and $pO_3$. From these results, the thermodynamic evaluation of ${\Delta}H$ and ${\Delta}S$, which are related with Gibbs' free energy change for single Bi2212 or Bi2223 phase, was performed.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.4
• /
• pp.1-9
• /
• 1998

The lipids from the seeds of Pinus koraiensis mostly composed of triacylglycerols (TGs), in which linoleic acid (46.2 mol%) and oleic acid (25.6 mol%) are present as main components in the fatty acid composition. Surprisingly, they also have unusual fatty acids with ${\Delta}^5$-double bond systems such as ${\Delta}^{5.9.12}-C_{18:3}$ (16.0 mol%), ${\Delta}^{5.9}-C_{18:2}$ (2.3 mol%) and ${\Delta}^{5.11.14}-C_{20:3}$ (0.8 mol%). Saturated fatty acids of palmitic, stearic and arachidic acid were present in less than 8.0 mol%. TG was resolved into 17 fractions by reverse-phase HPLC according to so-called partition number (PN) suggested by Plattner, in which TG molecules with ${\Delta}^{5}$-NMDB acyl chains eluted later than did those with ${\Delta}^{9}$-MDB acyl radicals. $Ag^+$-HPLC separated the TG into 14 fractions more clearly than did those with ${\Delta}^{9}$-MDB acyl radicals. $Ag^+$-HPLC separated the TG into 14 fractions more clearly than did reverse-phase HPLC, and the complexity of ${\Delta}^{5.9.12}-C_{18:3}$ moiety with silver ion impregnated in the column bed was in the level between ${\Delta}^{9.12.15}-C_{18:3}$ ($C_{18:3{\omega}3}$) and $C_{18:2{\omega}6}$ (${\Delta}^{9.12}-C_{18:2}$). In the $Ag^+$-HPLC, it was found that the molecular species having a given-numbered double bonds widely spreaded in the acyl chains eluted earlier than those concentrated in one acyl chain. The main molecular species are $(C_{18:2{\omega}6})_2/{\Delta}^{5.9.12}-C_{18:3}$ (14.8 mol%), $C_{18:1{\omega}9}/C_{18:2{\omega}6})_2$ (12.8 mol%) and $C_{18:1{\omega}9}/C_{18:2{\omega}6}/{\Delta}^{5.9.12}-C_{18:3}$ (10.9 mol%).

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.11a
• /
• pp.35-35
• /
• 1999

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.10a
• /
• pp.47-47
• /
• 1997

• Journal of the Korean Society for Heat Treatment
• /
• v.16 no.6
• /
• pp.320-328
• /
• 2003

A specimen of Cu-35%Sn alloy has been subjected to the unidirectional heat treatment in an attempt to examine the evolution of microstructures under varying thermal conditions. The specimen was cast in the form of a cylinder 10 mm in diameter and 200 mm in length, which was then installed in the temperature gradient field established inside a vertical tube furnace. The furnace temperature was adjusted to make the upper part at $750^{\circ}C$ and bottom end part at $300^{\circ}C$ of the specimen. The experiment was terminated by dropping it into water after the 30 minutes holding at given temperature. By the rapid cooling, the high temperature phases, ${\gamma}$ and ${\zeta}$, were retained at ambient temperature with some of ${\gamma}$ phase transformed to ${\varepsilon}$ phase, especially at the grain boundaries of ${\gamma}$ phase. The presence of ${\varepsilon}$ phase was found to determine the nature of phase transformations of the ${\zeta}$ phase undergoes upon cooling. In the close area of the ${\varepsilon}$ phase, ${\varepsilon}$ phase grew separately out of ${\zeta}$, and adds to the preexisting ${\varepsilon}$ whereas in areas away from ${\varepsilon}$, both ${\delta}$ and ${\varepsilon}$ grew simultaneously out of ${\zeta}$, and formed a lamella eutectoid structure. The transformation to ${\delta}$ was found to occur only in slow cooling. The hardness on each phase showed that the retained phases, ${\gamma}$ and ${\zeta}$, could be plastically deformed without brittle fracture while the phases, ${\varepsilon}$ and ${\delta}$, were too brittle to be deformed.

• Journal of the Korean Ceramic Society
• /
• v.37 no.5
• /
• pp.466-472
• /
• 2000

As cathode materials of LiMn2O4-based lithium-ion secondary batteries, Li(Mn1-$\delta$M$\delta$)2O4 (M=Ni and Co, $\delta$=0, 0.05, 0.1 and 0.2) materials which Co and Ni are substituted for Mn, were syntehsized by the solid state reaction at 80$0^{\circ}C$ for 48 hours. No second phases were formed in Li(Mn1-$\delta$M$\delta$)2O4 system with substitution of Co. However, substitution of Ni caued to form a second phase of NiO when its composition exceeded over 0.2 of $\delta$ in Li(Mn1-$\delta$M$\delta$)2O4. As the results of charging-discharging test, the maximum capacity of Li(Mn1-$\delta$M$\delta$)2O4 appeared in $\delta$=0.1 for both Co and Ni. Also, Li(Mn1-$\delta$M$\delta$)2O4 electrode showed higher capacity and better cycle performance than LiMn2O4.

• Korean Journal of Materials Research
• /
• v.7 no.8
• /
• pp.701-706
• /
• 1997

AI-2.5wt%Li 합금을 시효처리하여 시효거동과 인장성질에 미치는 $\delta$' 상의 영향을 조사하였다. $\delta$' 상의 입자 반경은 시효 시간의 1/3승에 비례하여 조대화하였다. $\delta$' 상과 기지상과의 계면에너지는 0.0073 J/$m^2$, 확산계수는 1.42$\textrm{cm}^2$/sec, 초대화 거동은 MLSW이론에 부합됨을 알 수 있었다. 미세하고 균일하게 분포한 $\delta$'상은 전반적으로 인장강도의 상승을 가져왔으며, 평형상인 $\delta$상의 석출과 이로 인한 무석출물대의 존재로 과시효시 강도가 감소하였다. 인장변형시 전위는 초전위로 아시효와 피크시효시에는 $\delta$'상을 전단하지만 과시효시에는 $\delta$'상을 전단하지 못하고 우회하여 전위루우프를 형성한다.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.4
• /
• pp.146-151
• /
• 2001

The Frumkin adsorption isotherm of the over-potentially deposited hydrogen (OPD H) for the cathodic $H_2$ evolution reaction (HER) at the poly-Ni|0.05M KOH aqueous electrolyte interface has been studied using the phase-shift method. The behavior of the phase shift $(0^{\circ}\leq{\phi}\leq90^{\circ})$ for the optimum intermediate frequency corresponds well to that of the fractional surface coverage $(1\geq{\theta}\geq0)$ at the interface. The phase-shift method, i.e., the Phase-shift profile $(-{\phi}\;vs.\;E)$ for the optimum intermediate frequency, can be used as a new method to estimate the Frumkin adsorption isotherm $(\theta\;vs.\;E)$ of the OPD H for the cathodic HER at the interface. At the poly-Ni|0.05M KOH aqueous electrolyte interface, the rate (r) of change of the standard free energy of the OPD H with $\theta$, the interaction parameter (g) for the Frumkin adsorption isotherm, the equilibrium constant (K) for the OPD H with $\theta$, and the standard free energy $({\Delta}G_{\theta})$ of the OPD H with ${\theta}$ are $24.8kJ mol^{-1},\;10,\;5.9\times10^{-6}{\leq}K{\leq}0.13,\;and\;5.1\leq{\Delta}G_{\theta}\leq29.8kJ\;mol^{-1}$. The electrode kinetic parameters $(r,\;g,\;K,\;{\Delta}G_{\theta})$ depend strongly on ${\theta} (0{\leq}{\theta}{\leq}1)$.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.425-435
• /
• 2016

This paper describes a spread-spectrum clock generation method by utilizing a ${\Delta}{\Sigma}$ digital PLL (DPLL) which is solely based on binary phase detection and does not require a linear time-to-digital converter (TDC) or other linear digital-to-time converter (DTC) circuitry. A 1-bit high-order ${\Delta}{\Sigma}$ modulator and a hybrid finite-impulse response (FIR) filter are employed to mitigate the phase-folding problem caused by the nonlinearity of the bang-bang phase detector (BBPD). The ${\Delta}{\Sigma}$ DPLL employs a two-point modulation technique to further enhance linearity at the turning point of a triangular modulation profile. We also show that the two-point modulation is useful for the BBPLL to improve the spread-spectrum performance by suppressing the frequency deviation at the input of the BBPD, thus reducing the peak phase deviation. Based on the proposed architecture, a 3.2 GHz spread-spectrum clock generator (SSCG) is implemented in 65 nm CMOS. Experimental results show that the proposed SSCG achieves peak power reductions of 18.5 dB and 11 dB with 10 kHz and 100 kHz resolution bandwidths respectively, consuming 6.34 mW from a 1 V supply.