• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.559-563
• /
• 2010

The representation of color with natural dyes is closely related with the modern well-being life. This study is focused on the representation of target color of the blue, yellow, and red color system, these color sources were originated from the green tea, gardenia, and black rice respectively. The quantitative numerical value of brightness (L), color coordinates (a, b) were designated for the target color, the optimum color nearest to the target value was extracted with the solvent pH, temperature, and extraction time. The longer the extraction time had more thickening color in case of the gardenia. The L-a-b coordinate of extracted color were analyzed with the color difference meter and compared with the target color. The experimental variables were optimized to extract the color of the smallest ${\Delta}E$ with the target color. As a result, the CIE standard value was proposed and the color was represented.

• Progress in Superconductivity
• /
• v.9 no.2
• /
• pp.146-151
• /
• 2008

Measurements of surface resistance ($R_s$) of high temperature superconductor (HTS) films with accuracy are essential for microwave applications of HTS materials. In using the dielectric resonator method, uncertainties in the unloaded quality factor of the resonator cause significant errors in the measured $R_s$ of HTS films. We compare the Rs values of $YBa_2Cu_3O_{7-{\delta}}$ films calculated from the $Q_0$ as determined from the Lorentzian fit with that from the $Q_0$ as determined from the S-parameter circle-fit at temperatures between 15 K and 77 K. The two sets of values appeared to differ by 5%, 7%, 6%, and 11% at temperatures of 15, 60, 70, and 77 K, respectively, from each other, implying that careful error analysis needs to be performed in obtaining the $R_s$ of HTS films by using the Lorentzian-fit method, with the ones determined from the S-parameter circle-fit used as the reference.

• Korean Journal of Optics and Photonics
• /
• v.8 no.1
• /
• pp.1-6
• /
• 1997

The amplitude impulse S(x) of an interferometric optical imaging system for λ=193 nm(ArF laser) and NA=0.5 is derived for the pupil with superposed three Gauss pupils $A_1$($\omega$), $A_{2-}$($\omega$) and $A_{2+}$($\omega$). It is shown that FWHM of S(x) can be far less than the Rayleigh's criterion of resolution $\frac{1}{2}{\epsilon}_R$, where ${\epsilon}_R$ is equal to λ=193 nm in the present case of NA=0.5. The three Gauss pupils are provided in an optical system which consists of a Twyman-Green interferometer and an imaging system. The system is proposed and relevent optical components are discussed. Siloxane polymer is suggested for fabrications of amplitude modulation plates. In the present work, we assumed the system is free from aberration and linear. The case that the system has residual aberrations is important, and further work is necessary.

• Journal of the Korean Chemical Society
• /
• v.36 no.2
• /
• pp.185-190
• /
• 1992

Near-IR spectra for $ν_{\alpha}$+ Amide Ⅱ combination band of thioamides, and very dilute thioamide-DMSO solution in CCl4 were recorded in the temperature range of $5^{\circ}C$ to $55^{\circ}C$. This combination band was resolved by the computer program into two Lorentzian-Gaussian product function which have been identified with monomeric thioamide and thioamide-DMSO 1 : 1 complex. Equilibrium constants and thermodynamic parameters for the thioamide-DMSO hydrogen bonding were elucidated by the analysis of conce ntration and temperature dependent spectra. The hydrogen bonding strength between thioacetamide (TA) and DMSO in $CCl_4$ is stronger than that between thiopropionamide (TPA) and DMSO in CCl4. The ${\Delta}H^{\circ}$ for the TA-DMSO and TPA-DMSO 1 : 1 complex in CCl4 were -15.3 kJ${\cdot}$$mol^{-1}$ and -14.2 kj${\cdot}$$mol^{-1}$, respectively.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1131-1137
• /
• 1997

The production rates of leavening gases and textures of cookies were investigated with various chemical leavening agents(baking powders). The chemical leavening agents could be divided into three group of a fast-acting group such as potassium bicarbonate, tartaric acid, aluminium ammonium sulfate, and fumaric acid, a slow-acting group such as ammonium bicarbonate, sodium bicarbonate, $glucono-{\delta}-lactone$, and ammonium chloride. and a double-acting group such as anhydro monocalcium phosphate, disodium dihydrogenpyrophosphate, and aluminium potassium sulfate according to the different production rate of gases. The leavening rate of ammonium bicarbonate, which was the highest of all leavening agents used in this experiment, was 131.25%. But its after-taste in a cookie was not good due to the residual ammonia. $Glucono-{\delta}-lactone$ only had no after-taste. The higher leavening rate, the more peaks in texture profile graph. Ammonium bicarbonate showed the most peaks in this experiment. It was found that the number of peak had correlation with brittleness of cookies $(r^2=0.8176)$ and brittleness of cookies was different as to various chemical leavening agents.

• Economic and Environmental Geology
• /
• v.31 no.3
• /
• pp.171-183
• /
• 1998

Early Tertiary volcanics, volcanoclastics and granodiorite occur in the Barton Peninsula, King George Island, Antarctica. In the granodioritic stock and volcanic rocks, propylitic alteration characterized by actinolite, epidote, chlorite and calcite is widespread, and disseminations and veinlets of sulfide minerals such as pyrite, chalcopyrite and bornite are ubiquitious. The study on the hydrothermal alteration near granodioritic stock can be summarized as follows; (1) granodiorite intrusion is a small, high level stock associated with calc-alkaline volcanism, and have high copper content, (2) high temperature type of propylitic alteration and common occurrence of copper sulfides in and around granodiorite intrusion, (3) low ${\delta}^{34}S$ values of pyrites by oxidational conditions of sulfide deposition, (4) low ${\delta}^{34}S$ values of quartz and feldspar in the granodiorite, and isotopic non-equilibrium by hydrothermal alteration. It suggest that hyrothermal alteration and mineralization near granodioritc stock should be genetically related to granodiorite intrusion in the Barton Peninsula.

• Korean Journal of Materials Research
• /
• v.22 no.7
• /
• pp.368-373
• /
• 2012

Glasses were prepared with compositions of $(13-x)BaO-80B2_O_3-7Li_2O{\cdot}xSm_2O_3$, BBLSx(x=0.5, 0.4, 0.3) by melting the starting materials of boron oxide(99.9%), lithium oxide(99.9%), barium carbon oxide(99.9%), and samarium oxide(99.9%) and then quenching the melt at $1350^{\circ}C$. This led to good-quality BBLSx(x=0.4, 0.3) and poor-quality BBLSx(x=0.5) glasses. The physical and structural properties of the BBLSx glasses were studied by means x-ray diffraction, scanning electron microscopy(SEM), differential scanning calorimetry(DSC), and dielectric spectroscopy. From the x-ray diffraction and SEM results, the quality of the BBLSx glasses significantly depends on the $Sm_2O_3$ concentration. The x-ray diffraction pattern showed that the crystallites in the BBLSx glasses after heat treatment at $700^{\circ}C$ may be $LiBaB_9O_{15}$. From the DSC results, the glass transition temperatures($T_g$), crystallization temperatures($T_c$), and the maximum temperatures of the crystallized($T_p$) BBLSx glasses all changed with the $Sm_2O_3$ concentration. According to the dielectric spectroscopy results, the values of the real dielectric constant and Tan ${\delta}$ of the BBLSx glasses depended on the $Sm_2O_3$ concentration. The values of the real dielectric constant and Tan ${\delta}$ were also shown to depend on the measuring temperature, possibly due to the ion migration in the bulk of the BBLSx glasses.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.5
• /
• pp.541-548
• /
• 2017

A theoretical study on gas-liquid two-phase flow flushing systemnitrogen gas to the oil used for existing flushing equipment was conducted on the basis of ISO code so as to improve performance of existing high-temperature oil flushing equipment used in ocean plant facility drying field. For study, we analyzed process simulation results mixed fluid mixing ratio, temperature, Reynolds number and liquid hold up affectcleaning performance after designing oil-nitrogen gas mixture flushing system process. As a result, as the volume flow rate of mixed fluid increases with the tube diameter the volume fraction of the gas phase constant, the liquid fraction difference value at the inlet and outlet of horizontal hydraulic piping increases. It was found that the phase distribution between oil and nitrogen gas bubbles varies depending on the position the pipe lengthdirection. This change in phase distribution is expected to have a significant impact on the clean performance of an oil-nitrogen gas mixture flushing system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.105-105
• /
• 2000

현재 급격히발전하는 이동통신기술로 미루어 보아 앞으로는 모든 정보통신이 무선통신으로 이루어질 것이다. 그런데 무선통신은 이동성과 대용량의 정보전송에 초점을 맞추어 발전하고 있다. 많은 정보량을 전달하기 위해서 현재 사용되는 주파수 대역보다 고주파의 전파가 사용되어야 한다. 또한 이동성을 향상시키기 위해서는 통신기기의 소형화를 이루어야 하고 그러기 위해서 궁극적으로 모든 소자를 하나의 칩(chip)으로 집적화하는 것이 필요하다. 따라서 벌크상태로 사용되고 있는 유전체 공진기를 소형화, 즉 박막화해야만 한다. 결국 유전체 박막의 마이크로파 대역에서의 유전특성을 연구하고 그 특성을 향상시켜야만 한다. 통신기기에서 사용되는 유전체 공진기는 소형화를 위해 높은 유전율과 낮은 유전손실(tan$\delta$), 즉 높은 품질계수 (Q)를 가져야 한다. 마이크로파 대역에서 사용되고 있는 유전체 중에서 TiO2는 벌크 상태의 rutile 상에서 100정도의 높은 유전율과, 4 GHz에서 10,000 정도의 높은 품질계수를 나타낸다고 보고되어 있다. 따라서 본 연궁서는 TiO2 박막의 마이크로파 유전특성을 연구하였고 anatase 박막의 유전특성도 측정하였다. TiO2 박막을 RF magnetron reactive sputtering 방법으로 Ar (15 sccm)과 O2 (1.5 sccm) 기체를 사용하여 상온에서 증착하였다. 4mTorr의 증착압력에서 안정한 rutile 박막을 얻었고, 15 mTorrdo서 준안정한 anatase 박막을 얻을 수 있었다. 그리고 그 중간의 압력에서 두 상이 혼합된 박막이 증착되었다. 위와 같은 방법으로 형성한 TiO2 박막의 마이크로파 유전특성을 측정하기 위해 마이크로스트립 링공진기 (microstrip ring resonator)를 제작하였다. 마이크로스트립 링 공진기는 링의 원주길이가 전자기파 파장길이의 정수배가 되면 공진이 일어나는 구조이다. Fused quartz를 기판으로 하여 증착압력을 변수로 하여 TiO2 박막을 증착하였다. 그리고 그 위에 은 (silver)을 사용하여 링 패턴을 형성하였다. 이와 같이 공진기를 제작하여 network analyzer (HP 8510C)로 마이크로파 대역에서의 공진특서을 측정하였다. 공진특성으로부터 전체 품질계수와 유효유전율, 그리고 TiO2 박막의 품질계수를 얻어내었다. 측정결과 rutile에서 anatase로 박막의 상이 변할수록 유전율은 감소하고 유전손실은 증가하는 결과를 나타내었다.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.99
• /
• pp.10-29
• /
• 2021

This paper is an introductory study of the wooden Buddha images excavated in the Mekong Delta in present-day southern Vietnam. Approximately thirty examples of wooden Buddha images have been recovered in the Mekong Delta. As they were found among the major historic sites of Funan (the first kingdom in Southeast Asia), including Oc Eo, and likely date to the sixth century, they can be regarded as the works of Funan. Similarly to stone Buddha images, these wooden examples are considered important for their demonstration of aspects of early Buddhist sculpture in Southeast Asia. Most of these Funan wooden Buddha images are presumed to have been produced around the sixth century based on radiocarbon dating and their stylistic characteristics. This paper analyzed the iconography and style of eight examples whose forms are relatively recognizable. The eight images can be divided into four types according to their postures, dress styles, and hand gestures. They all share features of the Sarnath style of the Gupta period in India as seen in their slender bodies and the outer robe that clings to the body. However, some display a South Indian style of Buddha images in their upright posture, style of wearing a monastic robe with the right shoulder exposed, and making the vitarka mudra (preaching gesture) that is often seen in Sri Lankan Buddha images. This suggests that Buddhist sculptors in Funan devised a new style by incorporating the principal styles of Indian Buddhist sculpture. Another notable feature of these Funan images is their material, namely, wood. While none of the contemporaneous Hindu sculptures discovered from the same historic sites are made of wood, numerous Buddhist sculptures are. This paper postulates that the use of wood in Buddhist sculptures was promoted for reasons beyond ease of carving. According to the Buddhist literature, the first-ever Buddha image was the so-called 'Udayana image' made out of sandalwood. This image and its story was well-known in the Southern Dynasty of China around the sixth century. Interestingly, some auspicious sandalwood images of the Buddha was believed to have been brought into the Southern Dynasty from Funan. This suggests the possibility that the legend of the Udayana image might have been known in Funan as well and resulted in the production of wooden sculptures there.