• 한국재료학회지
• /
• 제16권1호
• /
• pp.1-4
• /
• 2006

Biodegradable $\beta$-tricalcium phosphate ( $\beta$-TCP)/poly(lactide-co-glycolide) (PLGA) composites were synthesized by in-situ polymerization with microwave energy. The influence of the $\beta$-TCP content in $\beta$-TCP/PLGA composites on the molecular weight, crystallinity, microstructure and mechanical properties was investigated. As the molecular weight of composites decreased, the $\beta$-TCP content increased up to 10 wt.%, while the excess addition of the $\beta$-TCP content above 10 wt.% the molecular weight increased with increasing of the $\beta$-TCP content. This behavior would be due to the superheating effect or nonthermal effect induced by microwave energy. It was found that the bending strength and Young's modulus of the $\beta$-TCP/PLGA composites was proportional to the molecular weight of PLGA. The bending strength of the $\beta$-TCP/PLGA composites ranged from 18 to 38 MPa, while Young's modulus was in the range from 2 to 6 GPa.

• 한국세라믹학회지
• /
• 제41권8호
• /
• pp.582-587
• /
• 2004

수산화아파타이트(HAp) 및 P-인산3칼슘($\beta$-TCP)으로 구성되는 2상 인산칼슘염(BCP)을 고상반응법으로 합성하고, 이를 상압 및 autoclave를 이용한 고압에서 수열반응 시킴으로써 응집입자의 미세화를 시도하였다. 이 과정에서 일어나는 결정 상 및 화학조성, 구성상의 상대적인 양, 비표면적, 미세구조의 변화에 미치는 공정조건의 영향을 XRD, FT-IR, 질소흡착에 의한 BET법, SEM을 이용하여 검토하였다.

• 보건의료산업학회지
• /
• 제13권4호
• /
• pp.133-144
• /
• 2019

Objectieves: 본 논문의 목적은 정형외과 수술 중 골결손에 대하여 β-TCP를 이용하여 치료 받은 대상자의 방사선학적 결과를 평가하기 위함이다. Methods: 총 49명의 대상자 중 24명 (49.0%)는 남자 였으며, 25명 (51%)는 여자였다. 요인 분석을 위하여 의무 기록 검토가 시행되었다. 각 시기별로 골대체재의 흡수 정도는 Irwin 의 방사선학적 체계에 따라서 평가되었다. Results: 술 후 3개월 째, 세 가지 측정 변수인 골대체제 이식 견고성, 진단 당시 나이, 병변의 부피에 의한 회귀 모형의 설명력은 65.6% 였다. 술 후 6개월 째, 두 가지 측정 변수인 병변의 부피, 골대체제 이식 견고성에 의한 회귀 모형의 설명력은 32.9% 였다. 술 후 9개월 째, 두 가지 측정 변수인 병변의 장축 길이, 골대체제 이식 견고성에 의한 회귀 모형의 설명력은 30.8% 였다. Conclusions: 골대체제 이식 견고성, 병변의 부피, 진단 당시 나이 그리고 병변의 장측 길이가 골대체제의 흡수에 영향을 미치는 인자였다.

• 한국세라믹학회지
• /
• 제33권1호
• /
• pp.7-16
• /
• 1996

${CO_3}^{2-}$ containing whisker-like hydroxyapatite powders were synthesized byhomogeneous precipitation method using urea, Dicalcium phosphate anhdrate[DCPA; $CaHPO_4$] and octacalcium phosphate [OCP; $Ca_8H_2(PO_4_)6\cdot5H_20$]were obtained as precursors and they transformed to high crystalline hydroxyapatites at pH 5.62, and 6.54 respectively. According to the condition of the final pH in the solutions for the solution products and urea contents OCP was remained. When the solution product of $Ca^{2-}$ and ${PO_4}^{3-}$ was $1.5\times 10^4$[$mM^2$] and the content of urea was 0.25 mol.$dm^{-3}$ well crystallized whisker-like hydroxyapatite tens of micrometer in length was obtained. By heat treatment DCPA and OCP were decomposed into $\beta$-tricalcium phosphate [$\beta$-TCP ; $\beta$-$Ca_3{PO_4}_2$] and $\beta$-dicalcium phosphate [$\beta$-DCP ;$\beta$-$Ca_2P_2O_4}_2$]. And well-crystallized hydroxyapatite was partially decomposed into $\beta$-TCP at $800^{\circ}C$.

• 한국세라믹학회지
• /
• 제55권6호
• /
• pp.590-596
• /
• 2018

To improve the injection behavior of brushite cement, dense ${\beta}-Ca_3(PO_4)_2$ (${\beta}-TCP$) granules were added to the starting material. The spherical ${\beta}-TCP$ granules prepared by spray-drying and subsequent sintering at $1000{\sim}1200^{\circ}C$ accounted for fractions of from 0.5 to 0.7 of the total ${\beta}-TCP$. The injection behavior was evaluated by measuring the injected mass divided by the loaded mass of paste in the syringe pump. The injected amount was increased with the increase in the fraction and sintering temperature of ${\beta}-TCP$ granules, except at $1200^{\circ}C$. The increase in the fraction of ${\beta}-TCP$ and its sintering temperature resulted in a decrease in the plastic limit, which is the volume of water required to liquefy the compact. The rest water could be utilized in the cement with the reduced plastic limit for improved injectability. The amounts of rest water assigned for powdery phase were estimated, and correlated with the injectability of paste.

• 한국재료학회지
• /
• 제26권8호
• /
• pp.449-453
• /
• 2016

$HA(hydroxyapatite)/{\beta}-TCP$ (tricalcium phosphate) biomaterial (BCP; biphasic calcium phosphate) is widely used as bone cement or scaffolds material due to its superior biocompatibility. Furthermore, $NH_4HCO_3$ as a space holder (SH) has been used to evaluate feasibility assessment of porous structured BCP as bone scaffolds. In this study, using a spark plasma sintering (SPS) process at 393K and 1373K under 20MPa load, porous $HA/{\beta}-TCP$ biomaterials were successfully fabricated using $HA/{\beta}-TCP$ powders with 10~30 wt% SH, TiH2 as a foaming agent, and MgO powder as a binder. The effect of SH content on the pore size and distribution of the BCP biomaterial was observed by scanning electron microscopy (SEM) and a microfocus X-ray computer tomography system (SMX-225CT). The microstructure observations revealed that the volume fraction of the pores increased with increasing SH content and that rough pores were successfully fabricated by adding SH. Accordingly, the cell viabilities of BCP biomaterials were improved with increasing SH content. And, good biological properties were shown after assessment using Hanks balanced salt solution (HBSS).

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권4호
• /
• pp.360-373
• /
• 2006

The purpose of this research was to investigate whether pulsed electromagnetic field (PEMF) stimulation applied to the rabbit cranial defects grafted with ${\beta}$-tricalcium phosphate (${\beta}$-TCP) could affect the new bone formation. With 16 New Zealand white rabbits under the same condition, bilateral calvarial bone defects were formed around the sagittal suture line. The defect on the left side was grafted with ${\beta}$-TCP, while on the right side was grafted by harvested autogenous bone. PEMF was applied to 8 rabbits for 8 hours per day. The bony specimen were divided into 3 groups, the group 1 was autogenous bone grafted specimen, the group 2 was ${\beta}$-TCP grafted with PEMF, and the group 3 was ${\beta}$-TCP grafted without PEMF. We investigated the bone regeneration & growth factor expression at 2, 4, 6, and 8 weeks. As a result, BMP 2 was expressed in the group 1 from 2 weeks, the group 2 from 4 weeks, and the group 3 from 6 weeks. BMP 4 was expressed in the group 1 from 2 weeks, in the group 2 and the group 3 from 4 weeks. 4. There was no significant difference in expression pattern of BMP 7, PDGF, VEGF, and TGF-${\beta}$1 during grafted bone regeneration in group 1, 2, and 3. According to our results, PEMF stimulation could be effective on the new bome formation in animal study, and have a feasibility of clinical use.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권1호
• /
• pp.19-25
• /
• 2011

Purpose: Addition of platelet-rich plasma (PRP) and platelet-rich fibrin (PRF) to grafting material has become widely accepted additively for bone regeneration because it can raise high expectations on it's clinical potential. The aim of this study was to evaluate the efficacy of PRP and PRF on early bone regeneration of rabbits when used in combination with beta tricalcium phosphate. Methods: In eight rabbits, the calvarium was exposed and the two marrows were penetrated. After then these artificial bone defects were augmented with ${\beta}$-TCP or ${\beta}$-TCP with PRP or ${\beta}$-TCP with PRF and covered. The animals were sacrificed after four and eight weeks. Histologic findings were observed under the light-microscope and histomorphometric analysis was performed by measuring calcified area of new bone formation within the CSD. Results: They demonstrated that new bone formation tended to be produced along the outline of graft materials. More amounts of newly bone was regenerated in ${\beta}$-TCP only and in combination of${\beta}$-TCP with PRF and it was statistically significant. In contrast, there was no significant difference between nothing apply and ${\beta}$-TCP with PRP groups in the relative amounts of newly mineralized bone. Conclusion: Within the limitation of this study, it can be concluded that PRF in combination with ${\beta}$-TCP showed a positive effect on bone regeneration and statistically it was significant.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제30권4호
• /
• pp.282-291
• /
• 2004

Pure-phase beta-tricalcium phosphate(${\beta}$-TCP) proved to be a bone regeneration material, providing the patient with vital bone at the defect site in a reasonable time, making a second surgical procedure for bone harvesting unnecessary. This study compares bone healing and BMP 2/4 expression in cranial defects in rabbits grafted with autogenous bone and ${\beta}$-TCP. Thirty New Zealand White rabbits was divided into 3 group of 10 animals each. Bilateral calvarial defects were made in the parietal bones of each animal. ${\beta}$-TCP placed in one defect and the other defects was filled with autogenous bone. The animal were sacrificed at 4, 8 and 12 weeks. Immunohistochemical analysis was used to investigate the expression of BMP 2/4. 1. The new bone formation around autogenous bone from 4 weeks and ${\beta}$-TCP from 8 weeks. 2. In autogenous bone graft, BMP 2/4 expression was decreased from 4 to 12 weeks. 3. In ${\beta}$-TCP graft, BMP 4 expression was increased from 8 to 12 weeks. But, BMP 2 was observed from 12 weeks. This study showed that bone healing, regeneration and, BMP 2/4 expression are delayed in grafted ${\beta}$-TCP than autogenous bone.

• 한국재료학회지
• /
• 제16권11호
• /
• pp.676-680
• /
• 2006

The biodegradable $\beta$-tricalcium phosphate ($\beta$-TCP)/poly(lactide-co-glycolide) (PLGA) composites were synthesized by in situ polymerization with microwave energy. The degradation behavior of $\beta$-TCP/PLGA composite was investigated by soaking in simulated body fluid (SBF) for 4 weeks. The molecular weight of the $\beta$-TCP/PLGA composites decreased with soaking time until week 2, whereas the loss rate of molecular weight reduced after week 2. The incubation time was needed for the degradation of the $\beta$-TCP, indicating that the $\beta$-TCP should be detached from the PLGA matrix and then degraded into SBF solution. The studies of mass loss of the composites with the soaking time revealed that the degradation behavior of PLGA would be processed with the transformation from the polymer to the oligomer followed by the degradation. Morphological changes, whisker-like, due to transformation and degradation of polymer in the composites were observed after week 2. On the basis of the results, it found that the degradation behavior of $\beta$-TCP/PLGA composites was influenced by the $\beta$-TCP content in the composites and the degradation rate of the composites could be controlled by the initial molecular weight of PLGA in the composites.