• 한국추진공학회지
• /
• 제4권4호
• /
• pp.9-17
• /
• 2000

준안정상인 $\beta$형 HNIW의 용해와 안정상인 $\varepsilon$형 HNIW의 성장 특성을 고려한 모델식을 물질수지와 한께 계산하는 방법으로 결정성장 속도와 용해 속도를 계산하였다. 제시된 모델은 용액을 매체로 하여 진행되는 $\beta$$\longrightarrow$$\varepsilon$전이 현상에 대한 속도론적 데이터를 모사 하는데 유용하였다. 2 단 모델을 이용한 유효 인수로부터, 격정성장 과정에서 표면 축적 단계의 영향은 작으며, 확산 의존성은 ethyl acetate와 chloroform의 혼합 용매 중 chloroform의 함량이 증가함에 따라 감소함을 보였다. 이들 속도론 적 계수들을 이용한 수치모사를 통하여 $\varepsilon$-HNIW의 입자 크기를 예측하는 것이 가능하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1496-1499
• /
• 2001

Optical and electrical properties of the $In_2Se_3$ single crystals grown by use of the Bridgman technique were examined in the transition temperature range between $\alpha$-phase and $\beta$-phase. $In_2Se_3$ single crystal has the rhombohedral structure and lattice constants are a=4.025 $\AA$, c=28.771 $\AA$ in C-axis. The transition temperatures of the stoichiometric $In_2Se_3$ single crystal is $10^{-2}{\Omega}cm^{-1}$ according to the specimens. However it varies rapidly in the transition region.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권7호
• /
• pp.352-357
• /
• 2004

The composites were fabricated, respectively, using 61vol.% SiC - 39vol.% TiB$_2$ and using 61vo1.% SiC - 39vo1.% WC powders with the liquid forming additives of 12wt% $Al_2$O$_3$＋Y$_2$O$_3$ by pressureless annealing at 180$0^{\circ}C$ for 4 hours. Reactions between SiC and transition metal TiB$_2$, WC were not observed in this microstructure. The result of phase analysis of composites by XRD revealed SiC(6H), TiB$_2$ and YAG(Al$_{5}$Y$_3$O$_{12}$) crystal phase on the SiC-TiB$_2$, and SiC(2H), WC and YAG(Al$_{5}$Y$_3$O$_{12}$) crystal phase on the SiC-WC composites. $\beta$\$\longrightarrow$$\alpha$-SiC phase transformation was ocurred on the SiC-TiB$_2$, but $\alpha$\$\longrightarrow$$\beta$-SiC reverse transformation was not occurred on the SiC-WC composites. The relative density, the vicker's hardness, the flexural strength and the fracture toughness showed respectively value of 96.2%, 13.34GPa, 310.19Mpa and 5.53Mpaㆍml/2 in SiC-WC composites. The electrical resistivity of the SiC-TiB$_2$ and the SiC-WC composites is all positive temperature coefficient resistance(PTCR) in the temperature ranges from $25^{\circ}C$ to 50$0^{\circ}C$. 2.64${\times}$10-2/$^{\circ}C$ of PTCR of SiC-WC was higher than 1.645${\times}$10-3/$^{\circ}C$ of SiC-TiB$_2$ composites.posites.

• 한국결정성장학회지
• /
• 제8권2호
• /
• pp.233-239
• /
• 1998

화학기상증착법을 이용하여 tetramethylsilane(TMS)과 hexamethyldisilane(HMDS)으로부터 SiC층을 증착시켰다. 반응관 내의 압력은 1torr를 유지시켰으며, $H_2$ 가스를 사용하여 precursor를 반응로내로 수송하였고 $1200^{\circ}C$의 반응온도로 SiC 증착이 이루어졌다. 기판은 tantalum으로 masking한 Si-wafer와 platinum, molybdenum으로 masking한 MgO 단결정을 사용하였다. 금속층(Ta, Pt, Mo)에서의 SiC 증착 양상과 Si, MgO 위에서의 SiC 증착 양상을 비교함으로써 SiC 증착의 선택성을 관찰하였다. 증착층의 주된 상은 X-선 회절분석에 의해 $\beta-SiC$로 확인되었다. 또한 전자현미경 분석을 통해 각 층에서의 증착 양상의 차이를 조사하였다.

• 한국결정성장학회지
• /
• 제7권3호
• /
• pp.428-436
• /
• 1997

0.8$\mu$의 평균입자크기와 63$m^2/g$의 비표면적을 갖는 소질성이 뛰어난 hexacelsian분말이 so;ution-polymerization 방법에 의해 제조되어졌다. polymerization 경정을 통한 분말합성을 위하여 PVA 용액이 사용되었다. 소결후 치밀화된 hexacelsian은 $\alpha$,$\beta$,$\gamma$ 간의 상전이 거동을 보였고, 상대밀도 98.5% 의 치밀화ㄱ된 celsian 소결체가 $1600^{\circ}C$에서 72시간의 서냉공정을 거쳐hexacelsian의 상전이에 의하여 얻어졌다.

• 한국세라믹학회지
• /
• 제29권2호
• /
• pp.127-135
• /
• 1992

It has been reported that natural petalite showed a low negative thermal coefficient and wide coefficient and wide coexisting region with liquid phase in Li2O-Al2O3-SiO2 system. Therefore, we investigated variation of microstructure and thermal and mechanical properties when the amount of SiO2 content in petalite compound and MgO addition to it compound were changed. As SiO2 content exceeded 80 wt%, crystal phases of $\beta$-cristobalite and $\beta$-spondumene solid solution were formed. Generally, the densification and bending strength were increased by the addition of MgO, but the positive thermal coefficient was found in the case of MgO 10 wt% addition because of second phase and glassy phase.

• 한국추진공학회지
• /
• 제23권3호
• /
• pp.44-50
• /
• 2019

HNIW는 고에너지 물질로 4가지 결정상(${\alpha},\;{\beta},\;{\gamma},\;{\varepsilon}$)을 가지고 있으며, 결정상에 따른 열적 특성이 변화하는 것으로 알려져 있다. 본 연구는 혼합형 고체 추진제의 한 종류인 나이트레이트 에스터 폴리이서(Nitrate Ester Polyester; NEPE)계열의 추진제에서 주로 사용되는 HNIW의 결정상에 따른 추진제점도, 기계적 물성 및 연소특성 변화를 관찰하였다. HNIW의 결정상에 따라 경화 추진제의 기계적 물성은 큰 변화가 없으나, 연소 특성에는 큰 차이를 보는 것으로 확인할 수 있었다. 추진제의 높은 밀도와 안정된 연소특성을 동시에 고려할 때, HNIW의 결정상은 NEPE계 추진제의 주요 인자로 확인할 수 있다.

• 한국전기전자재료학회논문지
• /
• 제30권7호
• /
• pp.427-431
• /
• 2017

In this paper, we discuss ${\beta}-Ga_2O_3$ thin films that have been grown on freestanding GaN (FS-GaN) using furnace oxidation. A GaN template was grown by horizontalhydride vapor phase epitaxy (HVPE), and FS-GaN was fabricated using the laser lift off (LLO) system. To obtain ${\beta}-Ga_2O_3$ thin film, FS-GaN was oxidized at $900{\sim}1,100^{\circ}C$. Surface and cross-section of prepared ${\beta}-Ga_2O_3$ thin films were observed by field emission scanning electron microscopy (FE-SEM). The single crystal FS-GaNs were changed to poly-crystal ${\beta}-Ga_2O_3$. The oxidized ${\beta}-Ga_2O_3$ thin film at $1,100^{\circ}C$ was peel off from FS-GaN. Next, oxidation of FS-GaNwas investigated for 0.5~12 hours with variation of the oxidation time. The thicknesses of ${\beta}-Ga_2O_3$ thin films were measured from 100 nm to 1,200 nm. Moreover, the 2-theta XRD result indicated that (-201), (-402), and (-603) peaks were confirmed. The intensity of peaks was increased with increased oxidation time. The ${\beta}-Ga_2O_3$ thin film was generated to oxidize FS-GaN.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.256-256
• /
• 2013

Carbon nanotubes (CNT) / polyvinylidene fluoride (PVDF) piezoelectric composite films for nanogenerator devices were fabricated by spray coating method. When the CNT/PVDF mixture solution passes through the spray nozzle with small diameter by the compressed nitrogen gas, electric charges are generated in the liquid by a triboelectric effect. Then randomly distributed ${\beta}$ phase PVDF film could be re-oriented by the electric field resulting from the accumulated electrical charges, and might be resulted in extremely one-directionally aligned ${\beta}$ phase PVDF film without additional electric field for poling. X-ray diffraction patterns were used to investigate crystal structure of the CNT/PVDF composite films. It was confirmed that they revealed extremely large portion of the ${\beta}$ phase PVDF crystalline in the film. Therefore we could obtain the poled CNT/PVDF piezoelectric composite films by the spray coating method without additional poling process. Charge accumulation and resulting electric field generation mechanism by spray coating method were shown in Fig. 1. The capacitance of the CNT/PVDF films increased by adding CNTs into the PVDF matrix, and finally saturated. However, the I-V curves didn't show any saturation effect in the CNT concentration range of 0~4 wt%. Therefore we can control the performance of the devices fabricated from the CNT/PVDF composite film by adjusting the current level resulted from the CNT concentration with the uniform capacitance value.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 2000년도 Proceedings of 2000 International Nano Crystals/Ceramics Forum and International Symposium on Intermaterials
• /
• pp.59-64
• /
• 2000

Silicon nitride ceramics with various α/β phase ratio were fabricated by controlling sintering conditions of PECS process. Mechanical properties varied systematically with α/β ratio. Young's modulus and hardness increased with α-Si₃N₄ volume fraction, and fracture strength and toughness increased with β-Si₃N₄ content.