• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.2
• /
• pp.83-87
• /
• 2000

The five phenolic compounds of peony root were isolated by Sephadex LH-20 column chromatography. Their chemical structures were identified by spectroscopic methods (UV, FT-IR, FAB-MS and $^1H$ .&^13C$-NMR). The complete structures of these compounds were elucidated to be (+)-taxifolin-3-0-$\beta$-D-glucopyranoside, benzoic acid, gallic acid, (-)-epicatechin and (+)-catechin. The concentrations of five phenolic compounds in the peony root of three Korean cultivars (Youngchonjakyak, Euisungjakyak and Jomjakyak) were determined by reverse-phase HPLC. The constituents concentration in Youngchonjakyak were generally higher than in Euisungjakyak and Jomjakyak. The concentrations of (+)-taxifolin-3-O-$\beta$-D-glucopyranoside, benzoic acid, gallic acid, (-)-epicatechin and (+)-catechin in three different cultivars were ranged 0.23-0.52%, 0.20-0.30%, 0.26-0.28%, 0.09-0.12% and 0.34-0.63%, respectively.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.521-526
• /
• 2007

Density functional calculations have been performed for the reactions of perfluoroalkylsilane and alkylsilane with silica surfaces. The (100) and (111) surfaces of ${\beta}-cristobalite$ are used as two possible models of the hydroxylated amorphous silica surface. This is the crystalline phase of silica with density and refractive index closest to those of amorphous silica. Moreover, two ${\beta}-cristobalite$ surfaces have the two types of silanol groups, namely the single silanols and the geminal silanols. We investigate the possible adsorption structure and formation energy of perfluoroalkylsilane and alkylsilane molecules with two type of silanol groups. The results will be compared with cluster and slab model.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.848-850
• /
• 2001

In this work, we investigated on the white-colored ribbon fiber synthesized from GaN powder. We convinced the formation of monoclinic phase $\beta$-Ga$_2$O$_3$from the X-ray diffraction pattern on ribbon fiber. The 10 K PL spectrum consisted with the strong emission band caused by self-activated optical center at 3.464 eV with the full-width at half maximum of 48 meV and the impurity related emission bands. Through this work, the optical properties and the electrical conductivity of $\beta$-Ga$_2$O$_3$, it will be useful for the fabrication of optoelctronic devices operating in visible spectrum region.

• Journal of the Korean Ceramic Society
• /
• v.27 no.2
• /
• pp.288-296
• /
• 1990

Parent glasses for the experiments were prepared to be ratio of Li2O : Al2O3 : SiO2=4.5 : 25 : 70.5 as basic components, and TiO2 and ZrO2 in the mixing ratio of 1 : 1 were added as the nucleating agents, whose contents were increased in each sample. DTA, XRD, SEM, IR were observed, and thermal expansion and transmissivities were measured for the crystallized samples under the controlled heat-treatments. The transformation temperatures and the dilatometric softening temperatures in thermal expansion curves, and also the exothermic peaks in differential thermo-analytical curves were shifted to lower temperature. The crystal phase deposited through the heat-treatment was identified as ${\beta}$-quartz solid solution with XRD and IR analysis. The crystalline phases in oopactified samples were ${\beta}$-spodumene coexiting with ${\beta}$-quartz solid solution. The samples having more than 3% nucleating agents were transparent. The crystallized grain sizes were ranged 0.05 to 0.1$\mu\textrm{m}$. The crystallized transparent samples were exceeded 85% in the transmissivity.

• Journal of the Korean Ceramic Society
• /
• v.32 no.7
• /
• pp.858-864
• /
• 1995

A porous glass-ceramics body was prepared in the phosphate system. The glass composition of 47.2CaO-22.2TiO2-30.6P2O5 (mol%) containing a few weight percent of ZrO2 was suitable for a mother glass of a porous glass-ceramics. The dense glass-ceramics body was made by a two-step heat treatment of the mother glass. The crystalline phases of the glass-ceramics were $\beta$-Ca3(PO4)2 and CaTi4(PO4)6. The $\beta$-Ca3(PO4)2 phase could be selectively leached out with HCl solution and thus a crystalline $\beta$-Ca3(PO4)2 skeleton was remained. The dimension and shape of the porous glass-ceramics were nearly the same as the those of the first formed glass. The specific surface area and average proe radius of the porous glass-ceramics were 19$m^2$/g and 22 nm, respectively.

• Journal of the Korean Ceramic Society
• /
• v.29 no.8
• /
• pp.646-650
• /
• 1992

Effect of Li2O.4B2O3 frit addition on microstructural and thermal expansion behaviour of the $\beta$-spodumene ceramics made from kaolinite was investigated. With 2.0~4.0 wt% frit addition, the densification by liquid phase sintering caused low water absorption below 3% and enhancement of beding strength. As the amount of frit addition was increased, thermal expansion coefficient was increased to large scale, but in 2 wt% frit addition, its thermal expansion coefficient was constrained to 1.92$\times$10-6$^{\circ}C$-1.

• Analytical Science and Technology
• /
• v.17 no.1
• /
• pp.16-22
• /
• 2004

Inclusion complexes of the p-nitrophenol with ${\beta}$-cyclodextrin (CD), sulfated ${\beta}$-CD, and ${\beta}$-CD polymer cross-linked with epichlorohydrine (EP) were prepared and characterized by Raman spectroscopy. The intensity of vibration peaks of the C-O and C-N at 1284 and $856cm^{-1}$ of the p-nitrophenol in the presence of EP-linked CD polymer was remarkably increased, respectively. The vibration modes at 1284 and $856cm^{-1}$ are assigned to the out-of phase C-C-O stretching mode and the C-N stretching mode, respectively. The vibration peaks at 1284 and $856cm^{-1}$ increased with increasing the content of EP-linked CD polymers, while decreased with increasing the p-nitrophenol content. Furthermore, the vibration mode of the $NO_2$ symmetric stretch at $1344cm^{-1}$ enhanced with increasing the content of p-nitrophenol.

• Journal of the Korean Ceramic Society
• /
• v.22 no.1
• /
• pp.53-59
• /
• 1985

Experiments related to nitriding silicon with addition of $Si_3N_4$ have provided information on the effects of such inclusion on the phase relationships of Reaction Bonded Silicon Nitride. In the current work specimens containing 0-25wt% Si3N4 which have 55.5wt% $\alpha$ 4.5wt% $eta$, 40wt% amorphous phase were nitrided for 7-20 hours at 1300-135$0^{\circ}C$ The evaluation of nitridation was per-formed by means of $\alpha$-and $\beta$-phase contents determination in nitrided specimens, In order to observe nitrided region between silicon and silicon nitride scanning electron microscopy was used to study reacted region between silicon and silicon nitride particle. For this purpose semiconductor-grade silicon wafer single crystal was used as a silicon source. The incorporation of small amount of $Si_3N_4$ powder is contributed to enhancing the rate of formation of $\alpha$-phase.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.2
• /
• pp.119-123
• /
• 1999

Test of the optimum condition of solid phase micro extraction(SPME) was performed by use of 5 vol-atile components in dilute aqueous solution. Volatile components of Sancho(Zanthoxylum schinifolium) were isolated by SPME method and were analyzed by GC/MSD and compared with volatile compone-nts isolated by simultaneous distillation extraction (SDE) method. Total 31 components were identified by comparing gas chromatography retention time and mass spectral data. The major compounds were limonene geranyl acetate $\beta$-phellandrene phellandral mycene linalool rose oxide caproic acid and caprylic acid SPME sampling procedure was found to be a good method for qualitative analysis of the volatile components.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.2
• /
• pp.94-97
• /
• 2018

Lead zirconate titanate/poly-vinylidene fluoride (PZT/PVDF) piezoelectric devices were fabricated by incorporating carbon nanotubes (CNTs), for use as flexible energy harvesting devices. CNTs were added to maximize the formation of the ${\beta}$ phase of PVDF to enhance the piezoelectricity of the devices. The phase transition of PVDF induced by the addition of CNTs was confirmed by analyzing the X-ray diffraction patterns, scanning electron microscopy images, and atomic force microscopy images. The enhanced output efficiency of the PZT/PVDF piezoelectric devices was confirmed by measuring the output current and voltage of the fabricated devices. The maximum output current and voltage of the PZT/PVDF piezoelectric devices was 200 nA and 350 mV, respectively, upon incorporation of 0.06 wt% CNTs.