• Journal of the Korean Society for Heat Treatment
• /
• v.32 no.6
• /
• pp.263-269
• /
• 2019

The mechanism of microstructure and hardness changes during mill annealing of Ti-6Al-4V alloy was investigated. The annealing heat treatments were performed at $675{\sim}795^{\circ}C$ in vacuum for 2 hours, followed by air cooling. The microstructure was observed by using an optical microscope and X-ray diffraction, and hardness was measured by using a Rockwell hardness tester and micro Vickers hardness tester. The average grain size becomes smaller at $675^{\circ}C$ to $735^{\circ}C$ due to the formation of new grains rather than grain growth, but becomes larger at $735^{\circ}C$ to $795^{\circ}C$ due to growth of the already-formed grains rather than formation of new grains. The mill annealing temperature becomes higher, the ${\beta}$ phase fraction decreases and ${\alpha}$ phase fraction increases at room temperature. This is because the higher annealing temperature, the smaller amount of V present in the ${\beta}$ phase, and thus the ${\beta}$ to ${\alpha}$ transformation occurs more easily when cooled to room temperature. As the mill annealing temperature increases, the hardness value tends to decrease, mainly due to resolution of defects such as dislocations from $675^{\circ}C$ to $735^{\circ}C$ and due to grain growth from $735^{\circ}C$ to $795^{\circ}C$, respectively.

• BMB Reports
• /
• v.40 no.6
• /
• pp.1009-1015
• /
• 2007

In this communication, we report the efficacy of $\beta$-carotene towards differentiation and apoptosis of leukemia cells. Dose ($20{\mu}M$) and time dependence (12 h) tests of $\beta$-carotene showed a higher magnitude of decrease (significance p < 0.05) in cell numbers and cell viability in HL-60 cells than U937 cells but not normal cell like Peripheral blood mononuclear cell (PBMC). Microscopical observation of $\beta$-carotene treated cells showed a distinct pattern of morphological abnormalities with inclusion of apoptotic bodies in both leukemia cell lines. When cells were treated with $20{\mu}M$ of $\beta$-carotene, total genomic DNA showed a fragmentation pattern and this pattern was clear in HL-60 than U937 cells. Both the cell lines, on treatment with $\beta$-carotene, showed a clear shift in $G_1$ phase of the cell cycle. In addition the study also revealed anti-oxidant properties of $\beta$-carotene since there was reduction in relative fluorescent when treated than the control at lower concentration. Collectively this study shows the dual phenomenon of apoptosis and differentiation of leukemia cells on treatment with $\beta$-carotene.

• Journal of the Korean Ceramic Society
• /
• v.43 no.10 s.293
• /
• pp.595-600
• /
• 2006

The preparation of $\beta$-SiAlON powder by SHS in the system of $Si-Al-SiO_2-NH_4F(\beta-Si_3N_4)$ was investigated in this study. In the preparation of SiAlON powder, the effect of gas pressure, compositions such as Si, $NH_4F$, \beta-Si_3N_4$ and additive in mixture on the reactivity were investigated. At 50 atm of the initial inert gas pressure in reactor, the optimum composition for the preparation of pure $\beta$-SiAlON was $3Si+Al+2SiO_2+NH_4F$. The $\beta$-SiAlON powder synthesized in this condition was a single phase $\beta$-SiAlON with a rod like morphology.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.3
• /
• pp.238-244
• /
• 2016

Copper electrodeposition on AZ91 Mg alloy was studied in views of preferential deposition on ${\alpha}$- or ${\beta}$- phases and how to achieve uniform deposition over the entire surface on ${\alpha}$- and ${\beta}$-phases in a cyanide solution. The inhomogeneous microstructure of AZ91 Mg alloy, particularly ${\alpha}$- and ${\beta}$-phases, was found to result in non-uniform deposition of zincate layer, preferential deposition of zincate on ${\beta}$-phases, which leads to non-uniform growth of copper layer during the following electrodeposition process. The preferential depositions of zincate can be attributed to higher cathodic polarizations on the ${\beta}$-phases. Pin-hole defects in the copper electrodeposit were observed at the center of large size ${\beta}$-phase particles which is ascribed to gas bubbles formed at the ${\beta}$-phases. The activation of AZ91 Mg alloy in hydrofluoric acid solution was used to obtain uniform growth of zincate layer on both the ${\alpha}$- and ${\beta}$-phases. By choosing an optimum activation time, a uniform zincate layer was obtained on the AZ91 Mg alloy surface and thereby uniform growth of copper was obtained in a cyanide copper electroplating solution.

• Korean Journal of Microbiology
• /
• v.22 no.2
• /
• pp.77-84
• /
• 1984

This examined some conditions for the induction of ${\beta}$-D-galactosidase synthesis in Candida kefyr CBS 834. The optimal pH, temperature, and inoculum size either for growth or${\beta}$-D-galactosidase synthesis were 5.5, $30^{\circ}C$ and above 0.2 at A610nm, respectively. Enzyme activity began to increase at 2h after the addition of inducer, and continued to increase linearly up to $2{\sim}3h$ before reaching stationary phase, and thereafter its activity was decreased. ${\beta}$-D-galactosidase was induced either by lactose or galactose but not either by glucose or ethanol. The greater activity of ${\beta}$-D-galactosidase on galactose than on lactose indicated that the former might be natural inducer for ${\beta}$-D-galactosidase synthesis. The rate of its induction as a function of lactose concentration showed that enzyme activity increased linearly above 4mM, while it was very low below that. Glucose represed the induction of ${\beta}$-D-galactosidase, and the period of adaptation to inducer from other carbon sources was relatively short.

• KSBB Journal
• /
• v.21 no.5
• /
• pp.366-370
• /
• 2006

In this research, analysis of UDP-glucose a precursor of ${\beta}$-1,3-glucan by high performance liquid chromatography(HPLC) was established using a reversed phase system. One of key metabolite UDP-glucose was selected and its concentration changes was measured with the change of fermentation conditions. The effects of fermentation conditions with/without nitrogen source for cell growth on ${\beta}$-1,3-glucan production were dependent on the UDP-glucose concentration. The UDP-glucose was synthesized rapidly during cell exponential growth period and maintained high during ${\beta}$-1,3-glucan production period. The UDP-glucose concentration was higher for ${\beta}$-1.3-glucan production fermentor than that for cell growth fermentor. The ${\beta}$-1,3-glucan production was optimal at pH 5.5 and synthesis of ${\beta}$-1,3-glucan was greatest at pH 5.5.

• YAKHAK HOEJI
• /
• v.37 no.3
• /
• pp.216-227
• /
• 1993

Complex formations of practically insoluble antelmintic drugs such as mebendazole (MBZ), albendazole (ABZ) and flubendazole (FBZ) with dimethyl-$\beta$-cyclodextrin (DM-$\beta$-CyD) and 2-hydroxypropyl-$\beta$-cyclodextrin (HP-$\beta$-CyD) together with $\alpha$-, $\beta$- and $\gamma$-cyclodextrins(CyDs) in duffered solutions were investigated by solubility method. $A_{L}$ type phase solubility diagrams were obtained in all cases except for the complexation (B$_{s}$, type) of FBZ with $\gamma$-CyD. The highest stability constants were obtained with DM-$\beta$-CyD, followed by $\alpha$-CyD > $\beta$-CyD > HP-$\beta$-CyD > $\gamma$-CyD for ABZ, and HP-$\beta$-CyD > $\gamma$-CyD > $\beta$-CyD > $\alpha$-CyD for FBZ at pH 1.2. On the other hand, solid dispersion systems of ABZ and FBZ with $\beta$- and DM-$\beta$-CyDs were prepared by solvent evaporation method and evaluated by dissolution, differential thermal analysis and powder x-ray diffractometry. The dissolution rates of ABZ- and FBZ-DM-$\beta$-CyD solid dispersions were much faster than those of drugs alone, corresponding physical mixtures and tablets on market both at pH 1.2 and 6.8. Although dissolution rates of all samples at pH 6.8 were by far lower than those obtained at pH 1.2, as explained by pH-solubility profiles for ABZ and FBZ, the dissolution rates at pH 6.8 of ABZ from $\beta$- and DM-$\beta$-CyD solid dispersions exceeded the respective equilibrium solubility (23.9 $\mu\textrm{g}$/ml). Fast dissolution of ABZ from solid dispersions with CyDs was attributed to the reduction of drug crystallinity and particle size which was supported by DTA and powder x-ray diffractometry. Consequently these results suggest that solid dispersion systems with CyDs may provide useful means to markedly enhance the solubility and dissolution of benzimidazole antelmintic drugs.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2289-2292
• /
• 2010

Long chain dicationic ammonium salts were used successfully as phase transfer catalyst in the condensation reactions of aromatic aldehydes in water under ultrasonic irradiation for the first time. The quaternary salt having longer distance between the cation centers was more effective than the mono- and dicationic ones having short chain.

• Journal of Powder Materials
• /
• v.1 no.2
• /
• pp.119-198
• /
• 1994

The characteristics of various important microstructural factors of WC-base hard- metals (cemented carbides) such as the amount of Co metal binder phase, the carbide grain size, the microstructural defects acting as a fracture source, the solid solubility of tungsten in the binder phase affected by the carbon content, the precipitation of $Co_3W$, the domain size of binder phase, the formation of ${\beta}-free$ layer or Co-rich layer and CVD or PVD coated layer, and the effects of these factors on the flexural strength of the hardmetals are reviewed.

• Korean Journal of Medicinal Crop Science
• /
• v.9 no.1
• /
• pp.21-25
• /
• 2001

Major saponins in ginseng were analysed using reverse phase high performance liquid chromatography with binary mobile phase gradient control system instead of normal phase column. The optimum condition were as following : reverse phase column; ${\mu}{\beta}ondapak\;C_{18}$ column (Waters, $3.9mm{\times}300\;mm,\;5{\mu}m$), methyl cyanaide/water binary mobile phase gradient control system, solvent flow rate; 1.5 ml/min, and UV($203{\mu}m$ ) detector. The complete separation of ginsenoside $Rb_1,\;Rb_2,\;Rc,\;Rd,\;Re,\;Rf\;and\;Rg_1$ was achieved within 55 min. The Regression coefficients of the calibration curves for seven ginsenosides were 0.99.