• The Korean Journal of Food And Nutrition
• /
• v.21 no.2
• /
• pp.204-209
• /
• 2008

The present study examined the ex vivo effect of Job's tear on immune function. Seven to eight week old mice(Balb/c) were fed a chow diet ad libitum two different concentrations (50 and 500 mg/kg BW) of water extract of Job's tear were orally administ every other day for two weeks. The results indicated that macrophage activation had occurred in the mice receiving 50 mg/kg B. W. of Job's tear water extract. Overall, using a mouse model, this study demonstrated that Job's tear extract may enhance immune function by regulating the $IL-1{\beta}$, IL-6, $TNF-{\alpha}$ and IL-10 cytokine production capacity of activated macrophages in mice. This study may suggest that supplementation of Job's tear water extracts may enhance the immune function by regulating the enhancing the cytokine production by activated macrophage ex vivo.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.51.4-52
• /
• 2017

We present the derived kinematic characteristics of low-${\alpha}$ thin-disk and high-${\alpha}$ thick-disk stars in the Milky Way, investigated with a sample of about 33,900 G- and K-type dwarfs from the Sloan Extension for Galactic Understanding and Exploration (SEGUE). Based on the level of ${\alpha}$-element enhancement as a function of [Fe/H], we separate our sample into thin- and thick-disk stars and then derive mean velocity, velocity dispersion, and velocity gradients for the U, V and W velocity components, respectively, as well as the orbital eccentricity distribution. There are notable gradients in the V velocity over [Fe/H] in both populations: -23 km s-1 dex-1 for the thin disk and +44 km s-1 dex-1 for the thick disk. The velocity dispersion of the thick disk decrease with increasing [Fe/H], while the velocity.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.3
• /
• pp.77-83
• /
• 2007

This study was carried out to examine the optimum culture condition for the production of cellulose from Saprolegnia ferax and its physical characteristics. Conclusions obtained from the results of this study were as follows: In producing the cellulose from S. ferex, optimal pH and temperature were 7.0 and $26{\sim}30^{\circ}C$ with a maximum of $26^{\circ}C$, respectively. And, optimal culture period was 11days. WHC and OHC of biocellulose were 3.2(25.04 g/g) times and 3.5(25.75 g/g) times higher than those of commercial ${\alpha}-cellulose$(7.57, 7.25 g/g) respectively. The viscosity of biocellulose is lower than that of commercial ${\alpha}-cellulose$. And the effect of rpm on the viscosity of biocellulose was more than on the that of ${\alpha}-cellulose$.

• Polymer(Korea)
• /
• v.27 no.3
• /
• pp.176-182
• /
• 2003

The fluorine-containing epoxy resin, 2-trifluorotoluene diglycidylether (FER) was prepared by reaction of 2-chloro-${\alpha}$,${\alpha}$,${\alpha}$-trifluorotoluene with glycerol diglycidylether in the presence of pyridine catalyst. Curing behavior of FER/DDM system was investigated using dynamic and isothermal DSC. Cure activation energy (Ea) was determined by Flynn-Wall-Ozawa's equation. The rheological properties of FER/DDM system were studied under isothermal condition using a rheometer. Cross-linking activation energy (Ec) was determined from the Arrhenius equation based on gel time and curing temperature. As a result, the chemical structure of FER was confirmed by FT-IR, $\^$13/C NMR, and $\^$19/F NMR spectroscopy. The cure activation energy of FER/DDM system was 55.4 kJ/mol and conversion and conversion rate were increased with the curing temperature. The cross-linking activation energy of FER/DDM system was 41.6 kJ/mol and gel time was decreased with the curing temperature.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.11
• /
• pp.1608-1615
• /
• 2016

This study was conducted to determine the solubility of copper (Cu) in two sources of copper(II) sulfate ($CuSO_4$) including monohydrate and pentahydrate and three sources of dicopper chloride trihydroxide (dCCTH) including ${\alpha}$-form (dCCTH-${\alpha}$), ${\beta}$-form (dCCTH-${\beta}$), and a mixture of ${\alpha}$- and ${\beta}$-form (dCCTH-${\alpha}{\beta}$) at different pH and a 3-step in vitro digestion assay for pigs. In Exp. 1, Cu sources were incubated in water-based buffers at pH 2.0, 3.0, 4.8, and 6.8 for 4 h using a shaking incubator at $39^{\circ}C$. The $CuSO_4$ sources were completely dissolved within 15 min except at pH 6.8. The solubility of Cu in dCCTH-${\alpha}$ was greater (p<0.05) than dCCTH-${\beta}$ but was not different from dCCTH-${\alpha}{\beta}$ during 3-h incubation at pH 2.0 and during 2-h incubation at pH 3.0. At pH 4.8, there were no significant differences in solubility of Cu in dCCTH sources. Copper in dCCTH sources were non-soluble at pH 6.8. In Exp. 2, the solubility of Cu was determined during the 3-step in vitro digestion assay for pigs. All sources of Cu were completely dissolved in step 1 which simulated digestion in the stomach. In Exp. 3, the solubility of Cu in experimental diets including a control diet and diets containing 250 mg/kg of additional Cu from five Cu sources was determined during the in vitro digestion assay. The solubility of Cu in diets containing additional Cu sources were greater (p<0.05) than the control diet in step 1. In conclusion, the solubility of Cu was influenced by pH of digesta but was not different among sources based on the in vitro digestion assay.

• Proceedings of the SCSK Conference
• /
• 2003.09a
• /
• pp.700-718
• /
• 2003

Fructan, a polysaccharide existing in plants or produced by microorganisms, is a sugar polymer of fructose with $\beta$-2,6 linkages. In this study, we investigated some cosmeceutical properties of Fructan such as moisturizing effect, cell proliferation effect, anti-inflammation effect and cell cytotoxicity. Zymomonas mobilis, a microorganism producing Fructan, was cultured in a medium containing 10％ sucrose and 2％ yeast extract as main components for 24 hours at 37$^{\circ}C$ and pH 7. Fructan was obtained by precipitation from the cultured medium by adding alcohol (alcohol ratio of 1:3) after removing the enzyme by centrifuging. Fructan exhibited almost same moisturizing effect as hyaluronic acid and cell proliferation effect on human fibroblast and keratinocyte as well. Moreover, on cell proliferation test on bio-artificial skin constructed by 3-dimensional(3-D) culture after inducing primary skin inflammation with 0.5％ sodium lauryl sulfate (SLS), the 3-D artificial skin treated with 0.01 mg/ml, 0.05mg/ml of Fructan exhibited higher cell proliferation than the 3-D artificial skin treated with SLS only. On anti-inflammation test on 3-D artificial skin evaluated by measuring secreted quantity of interleukin-1$\alpha$ (IL-1$\alpha$) which is a pre-inflammatory mediator induced by SLS, the quantity of IL-1$\alpha$on the 3-D artificial skin treated with 0.01 mg/ml, 0.05mg/ml of Fructan was less than the one on the 3-D artificial skin treated with SLS only. As a result of these studies, Fructan has anti-inflammation effect against inflammatory reaction by a skin irritant as well as cell proliferation effect in bio-artificial skin. Fructan was also evaluated as a safe material without any toxicity in safety tests using fibroblasts and animals.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.4
• /
• pp.199-203
• /
• 2006

This paper presents an ASER (Accelerated Soft Error Rate) integral model. The model is based on the facts that the generated EHP/s(electron hole pairs) are diminished after some residual range of the incident alpha particle, where residual range is a function of the incident angle and the capping layer thickness over the semiconductor junction. The ASER is influenced by the flux of the alpha particles, the junction area ratio, the alpha particle incident angle when the critical charge is same as the collected charge, and the sizes of the alpha source and the chip. The model was examined with 8M static RAM samples. The measured ASER data showed good agreement with the calculated values using the model. The ASER decreased exponentially with respect to the operational voltage. As the capping layer thickness increases up to $16{\mu}m$, the ASER increases, and after that thickness, the ASER decreases. The ASER increased as the depth of BNW increased from $0{\mu}m\;to\;4{\mu}m$. and then saturated. The ASER decreased as the node capacitance increased from 2fF to 5fF.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.29 no.4
• /
• pp.247-259
• /
• 1993

The fishing experiment was carried out by the training ship Saebada in order to analyse the mesh selectivity for trawl cod-end, in the Southern Korea Sea and the East China Sea from June. 1991 through August, 1992. The trawl cod-end used in this experiment has the trouser type of cod-end with cover net. and the mesh selectivity was examined for the five kinds of the opening of mesh in its cod-end part. A total of 163 hauls, of which having mesh size 51.2mm ; A 89, 70.2mm ; B 54, 77.6mm ; C 55, 88.0mm ; D 52 and 111.3mm ; E 20 were used respectively. Selection curves and selection parameters were calculated by using a logistic function, S=1/(1+exp super(-(aL+b)) ). The mesh election master curves were estimated by S=1/(1+exp super(-[a(L/M)+$\beta$]) ). and the optimum mesh size were calculated with (L/M) sub(50) of master curve. In these cases 'a' and '$\alpha$' are slope, 'b' and '$\beta$' are intercept. 'L' is body length of the target species of fishes, 'M' is the mesh size, and 'S' denotes mesh selectivity. In this report, the four species of compressed form fishes were taken analized according to fish shape, and 'S' denotes mesh selectivity. In this report, the four species of compressed form fishes were taken analized according to fish shape, and the results obtained are summarized as follows: 1. Red seabream Pagrus major(Temminct et Schlegel) and yellow porgy Dentex tumifrons(Temminct et Schlegel) ; Selection rate in each mesh size of A, B, C, D and E were 99.7%, 97.5%, 91.4%, 76.7% and 57.8% respectively. Selection parameters 'a' and 'b' of mesh sizes C, D and E were 2.65 and -28.62, 4.40 and -77.73, 2.31 and -46.99, and their selection factors were 1.39, 2.10, 1.83 respectively. Selection parameters of master curve '$\alpha$' and '$\beta$' were 3.05 and -5.65 respectively, and (L/M) sub(50) was 1.85. The optimum mesh size of Red seabream was 141mm. 2. Filefish Thamnaconus modestus (Gunther) ; Selection rate in each mesh size of A, B, C, D and E were 99.6%, 98.3%, 91.2%, 80.0% and 48.6% respectively. Selection parameters 'a' and 'b' of mesh sizes C, D and E were 5.82 and -55.10, 2.92 and -36.90, 3.91 and -63.09, and their selection factors were 1.35, 1.44, 1.45 respectively. Selection parameters of master curve '$\alpha$' and '$\beta$' were 3.02 and -4.32 respectively, and (L/M) sub(50) was 1.43. The optimum mesh size was 129mm. 3. Target dory Zeus faber Valenciennes ; Selection rate in each mesh size of A, B, C, D and E were 99.7%, 100%, 83.2%, 91.6% and 65.0% respectively. Selection parameters 'a' and 'b' of mesh sizes C, D and E were 3.85 and -32.46, 4.19 and -57.38, 2.45 and -40.03, and their selection factors were 1.09, 1.56, 1.47 respectively. Selection parameters of master curve '$\alpha$' and '$\beta$' were 2.64 and -3.53 respectively, and (L/M) sub(50) was 1.34. The optimum mesh size was 127mm. 4. Butterfish Psenopsis anomala (Temminct et Schlegel) ; Selection rate in each mesh size of A, B, C, D and E were 99.2%, 34.1%, 46.5%, 14.3% and 2.4% respectively. Selection parameters 'a' and 'b' of mesh sizes B, C and D were 5.35 and -71.70, 5.07 and -69.25, 3.31 and -62.06 and their selection factors were 1.91, 1.75, 2.13 respectively. Selection parameters of master curve '$\alpha$' and '$\beta$' were 3.16 and -6.24 respectively, and (L/M) sub(50) was 1.98. The optimum mesh size was 71mm.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.4
• /
• pp.751-758
• /
• 2004

The NCS(Non-Cariogenicity Sugar) from Bacillus sp. S-1013 was purified by cold acetone and methanol precipitation, and DEAE-cellulose ion-exchange and Sephadex G-100 column chromatographies, to yield an amorphous yellow syrup. The melting point and $[\alpha]_D^{20}$ were 155-$157^{\circ}C$ and +53, respectively. Instrumental analyses such as FT-IR, $^1H-NMR, and ^{13}C-NMR$ showed that the NCS contained an O-H group, C-H, C=O, $NH_2$, anomeric carbon, anomeric proton, N-acetylgalactose, fucose, and neuramic acid, thus, the NCS was determined to be a trisaccharide of Fuc($1\longrightarrow4$)GalNAc($2\longrightarrow6$) NeuAc.

• Microbiology and Biotechnology Letters
• /
• v.35 no.2
• /
• pp.142-149
• /
• 2007

In this study, we investigated the biological activity of antioxidant and antibacterial activity of citrus by-product ferment. Hot water extracts and 80% methanol extracts from citrus byproduct of ferment were screened for antibacterial activity pathogenic bacteria by paper disc method. Among the various hot water extracts and 80% methanol extracts the Bacillus subtilis showed relatively strong antibacterial activities in the order. The reducing activity on the 1,1-diphenyl-2-picrylhydrazyl(DPPH) radical and ${\cdot}OH$ radical scavenging potential were sequentially screened, in search for antioxidant activities of citrus by-product ferment.