• Journal of Radiation Protection and Research
• /
• v.34 no.4
• /
• pp.155-164
• /
• 2009

In this paper, we used computerized glow curve deconvolution (CGCD) software with several models for the simulation of a TL glow curve which was used for analysis. By using the general approximation plus model, parameters values of the glow curve were analyzed and compared with the other models parameters (general approximation, mixed order kinetics, general order kinetics). The LiF:Mg,Cu,Si and the LiF:Mg,Cu,P material were used for the glow curve analysis. And we based on figure of merits (FOM) which was the goodness of the fitting that was monitored through the value between analysis model and TLD materials. The ideal value of FOM is 0 which represents a perfect fit. The main glow peak makes the most effect of radiation dose assessment of TLD materials. The main peak of the LiF:Mg,Cu,Si materials has a intensity rate 80.76% of the whole TL glow intensity, and that of LiF:Mg,Cu,P materials has a intensity rate 68.07% of the whole TL glow intensity. The activation energy of LiF:Mg,Cu,Si was analyzed as 2.39 eV by result of the general approximation plus(GAP) model. In the case of mixed order kinetics (MOK), the activation energy was analyzed as 2.29 eV. The activation energy was analyzed as 2.38 eV by the general order kinetics (GOK) model. In the case of LiF:Mg,Cu,P TLD, the activation energy was analyzed as 2.39 eV by result of the GAP model. In the case of MOK, the activation energy was analyzed as 2.55 eV. The activation energy was analyzed as 2.51 eV by the GOK model. The R value means different ratio of retrapping-recombination. The R value of LiF:Mg,Cu,Si TLD main peak analyzed as $1.12\times10^{-6}$ and $\alpha$ value analyzed as $1.0\times10^{-3}$. The R of LiF:Mg,Cu,P TLD analyzed as $7.91\times10^{-4}$, the $\alpha$ value means different ratio of initial thermally trapped electron density-initial trapped electron density (include thermally disconnected trap electrons density). The $\alpha$ value was analyzed as $9.17\times10^{-1}$ which was the difference from LiF:Mg,Cu,Si TLD. The deep trap electron density of LiF:Mg,Cu,Si was higher than the deep trap electron density of LiF:Mg,Cu,P.

• Korean Parent-Child Health Journal
• /
• v.4 no.1
• /
• pp.68-81
• /
• 2001

This research is to study about the weight-change of a pregnant woman, conditions of the woman and an infant. The weight-change of a mother during pregnancy was observed and that was expressed as the basis on the body mass index of a mother before pregnancy. The effects of weight-changes on both the discomfort, complications of pregnant mother and the condition of an infant were also investigated. Thus we set a purpose that this study would help pregnant woman and an infant to maintain and enhance their health conditions by proper weight control through nursing mediation. This study was performed in a certain hospital of university in seoul from Feb. 1. 2000 to Mar. 31. 2000. We explained the purpose of this study to the hospital institution and obtained consent of investigation. 152 inpatients who were in condition from PA 37 weeks to PA 42 weeks were the subject of this study. The research materials were made through of question paper that inpatients make answer by themselves and investigation paper. The question paper was about general background, weight and height before pregnancy and discomfort of the physical degree. And the investigation paper was about parity, maternal weight(late pregnancy), high pregnancy, delivery method, hemoglobin level, Apgar score, fetal weight. Physical discomfort was measured using the implement made by Kim hae won(1996) (chronbach's ${\alpha}=0.85$). SPSS was used to do statistics for managing and analyzing data. The results of this study were like followings. 1. The mean value of gained weight during pregnancy was about 13.8kg within from 3 kg to 26 kg. Among 152 research candidates, the gained weight of 80(52.6%) candidates remained within an ideal range. But that of 37 candidates(24.3%) became less than the ideal range. Also that of 35 candidates(23.0%) became over than the ideal range. 2. In the investigation of the relation between the weight change of a pregnant woman and her condition, the scores to represent physical discomfort were middle in all candidates. And the physical discomfort of over weight-gained group was more than that of low weight-gained group, but there was no difference in statistics(F=0.234, p=0.791). The weight-changes of pregnant woman didn't have an influence with the high risk of pregnancy(F=0.509, p=0.477). Also, the weight-changes didn't have an influence on delivery method($x^2=3.825$, p=0.148). However, in the investigation of the relation between weight-change and hemoglobin level, the change of hemoglobin level was highest in over weight gained group(F=3.062, p=0.05). 3. In the investigation of the weight-change of pregnant woman and the condition of infant. the weight changes didn't have an influence on both 1 min Apgar score(F=0.157, p=0.855) and 5 min Apgar score(F=0.030, p=0.970) of infant. Also, in the investigation of weight-change of a pregnant woman and weight difference of a infant with Pearson Correlation Coefficient, the weight-change of a pregnant woman affected vastly the weight of a infant. It was also found that the more pregnant woman gained in weight, the more did gain weighty infants. This relation was in net proportion(r=0.256, p=0.001). In conclusion, these results suggest that the weight-changes during pregnancy in Korea women of these days are more increased than that of the past days and individual variation in weight-changes is very high. Also, these results suggest that the changed hemoglobin level of a mother and weight of an infant were meaningfully affected by the weight-changes of a pregnant woman during pregnancy. However, the physical discomfort of a pregnant woman, the high risks of pregnancy, the delivery method and Apgar score of an infant were not affected by the weight-changes during pregnancy. Because the recommendation suggesting the ideal weight-change, used this study, is basis on the subject of American women, therefore, these results also suggest the necessity of such recommendation which is subject to Korean women.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.1
• /
• pp.34-38
• /
• 2017

Myelophycus simplex Papenfuss, a type of brown algae, is known to be majorly distributed in along the southern coast of Korea and Japan. The purpose of this study was to investigate the effects of M. simplex Papenfuss methanol extract (MSPME) on melanogenesis in ${\alpha}$-melanocyte-stimulating hormone-stimulated B16F10 melanoma cells. Melanin contents of B16F10 melanoma cells were decreased by 27, 41, and 59% in a dose-dependent manner, upon MSPME treatment at 100, 300, and $500{\mu}g/mL$, respectively. Tyrosinase activities in B16F10 melanoma cells were decreased by 18, 49, and 61% in a dose-dependent manner, upon MSPME treatment at 100, 300, and $500{\mu}g/mL$, respectively. MSPME suppressed expression of tyrosinase, tyrosinase-related protein-1, tyrosinase-related protein-2, and melanocyte-inducing transcription factor in B16F10 melanoma cells. Concentration of $50{\mu}g/mL$ of MSPME especially induced greater decreases in tyrosinase activity, melanin contents, and melanogenic enzyme protein expressions. This results indicate that MSPME inhibits melanin synthesis and tyrosinase activity, and M. simplex Papenfuss extract may be an ideal candidate as a skin whitening agent.

• Journal of the Korean Ceramic Society
• /
• v.49 no.5
• /
• pp.475-483
• /
• 2012

High capacitance X5R MLCCs based on $BaTiO_3$ ceramic dielectric layers exhibit a single broad, asymmetric arc shape impedance and modulus response over the wide frequency range between 1 MHz to 0.01 Hz. Analysis according to the conventional brick-layer model for polycrystalline conductors employing a series connection of multiple RC parallel circuits leads to parameters associated with large errors and of little physical significance. A new parametric impedance model is shown to satisfactorily describe the experimental spectra, which is a parallel network of one resistor R representing the DC conductivity thermally activated by 1.32 eV, one ideal capacitor C exactly representing bulk capacitance, and a constant phase element (CPE) Q with complex capacitance $A(i{\omega})^{{\alpha}-1}$ with ${\alpha}$ close to 2/3 and A thermally activated by 0.45 eV or ca. 1/3 of activation energy of DC conductivity. The feature strongly indicate the CK1 model by J. R. Macdonald, where the CPE with 2/3 power-law exponent represents the polarization effects originating from mobile charge carriers. The CPE term is suggested to be directly related to the trapping of the electronic charge carriers and indirectly related to the ionic defects responsible for the insulation resistance degradation.

• Korean Journal of Microbiology
• /
• v.52 no.4
• /
• pp.421-427
• /
• 2016

Acne is known as the most common skin disease. It commonly occurs during adolescents, but it is also present in children and adults because of air pollution, drug abuse and so on. In addition to the hormonal, genetic and environmental factors, Propionibacterium acnes (P. acnes) have also critical roles in outbreak of acne by inducing inflammatory mediators. Increase of sebum production provides an ideal environment for P. acnes that induce inflammation on the skin by activation of monocytic cells and stimulation of inflammatory cytokines. In this study, natural extracts were investigated for anti-inflammatory effects against inflammatory acne by P. acnes infection in terms of reducing cytokine production. Eucalyptus globulus extracts effectively suppressed mRNA synthesis of inflammatory mediators such as $TNF-{\alpha}$, $IL-1{\beta}$, IL-2, and NLRP3 in P. acnes-activated macrophages. Moreover, Eucalyptus globulus extracts inhibit activation of transcription factors, $NF-{\kappa}B$ and NFAT, which are known as key regulators of inflammatory cytokine production. This study suggests the potential of using Eucalyptus globulus extracts as alternative agents for the treatment of acne.

• Journal of the Korea Concrete Institute
• /
• v.24 no.5
• /
• pp.585-596
• /
• 2012

In this study, the flexural characteristics of reinforced polymer concrete T-beams strengthened with GFRP, typically used for bridges and parking structures, are investigated. A method to determine the flexural failure mode of reinforced polymer concrete T-beams comprised of compression failure (CF), tension failure (TF), and fiber sheet failure (FF) for different levels of GFRP strengthening is proposed. Moreover, the present study provides a formula to calculate the design flexural strength for each failure mode. In reinforced polymer concrete T-beams strengthened with GFRP, an ideal failure mode can be achieved when the failure occurs in the following order: 1) yield of steel reinforcement, 2) failure of GFRP, and 3) compression failure of concrete. In the case of FF mode, due to GFRP failure before the polymer concrete crushing in compression region, a concept of equivalent rectangular block based on the ultimate limit state of concrete should not be used. Thus, this study suggests an idealized stress-strain curve for polymer concrete and finds parameters for stress block, ${\alpha}$ and ${\beta}$ based on the strain distribution in polymer concrete. Furthermore, the present study suggests an aspect ratio of 2.5 by examining the compressive stress distribution and design flexural strength characteristics for different aspect ratio of T-beams. This study also provides a design flexural strength formula, and validates its acceptability based on experiment and theoretical analysis.

• The Journal of the Korea Contents Association
• /
• v.19 no.7
• /
• pp.538-545
• /
• 2019

The purpose of this study was to analyze the change of body temperature and pain by application of Gaussian magnetic for the elderly delayed muscle pain. For the purpose, we selected 15 elderly women(age;$69.47{\pm}1.60$) and conducted repeated experiments. The Gaussian magnetic field area was divided into three areas (1000G, 1500G, 2000G). The applying arbitrarily manufactured magnetic field wristbands changes of body heat and pain before and after wearing Gaussian magnetic were measured and collected data were analyzed using SPSS 19.0. To examine the pre-and post-treatment differences by treatment areas, we conducted paired t-test. Group differences and interaction effects were analyzed using two-way ANOVA and Duncan post hoc tests. The significance level was set to ${\alpha}=.05$. The results are as follows. The change of body heat by the Gaussian magnetic field area showed significant differences in all three groups(P<.05). There were also significant differences in the results of group interactions and in the delayed muscle pain scale between groups(P<.05). The area with the largest difference appeared in the area of 1500G field. The 1000G-1500G Gauss field is considered to be the most ideal magnetic field for body heat and muscle pain changes. In conclusion, the Gaussian magnetic field of 1000G-1500G may affect body temperature and muscle pain in the elderly, and may have a significant impact on the quality of life in old age.

• The Korea Journal of Herbology
• /
• v.29 no.1
• /
• pp.45-52
• /
• 2014

Objectives : The aim of this study was to investigate the effects water extract of fermented new korean medicinal mixture, combinations of Mori Folium, Adenophorae Radix, Phllostachyos Folium and Citri Pericarpium (F-MAPC), on adipocyte differentiation, adipogenesis and glucose uptake using undiffernentiated 3T3-L1 adipocytes and L6 myoblasts. Methods : Each herb and those mixture were respectively fermented and then extracted with water. We carried on MTT assay for check-up on cell toxicity, Oil Red O staining for determination of cell differentiation and intracelluar adipogenesis. Western blot analysis for measurement of pAMPK and pACC, $C/EBP{\alpha}$, $PPAR{\gamma}$ and Glut-4 protein expressions were performed. Results : F-MAPC showed significant inhibitory activity on adipocyte differentiation in 3T3-L1 preadipocytes without affecting cell toxicity as assessed by measuring fat accumulation, and this effect was 2 fold higher in 0.2 mg/ml F-MAPC than that of the same dose of each fermented herbal extract alone. In addition, these effects were associated with modulation of adipogenic transcription factors, such as $C/EBP{\alpha}$, $PPAR{\gamma}$, as well as stimulated phosphorylations of AMPK and ACC. Translocation of Glut-4 was significantly increased by 10.2% in L6 cells treated with 0.2 mg/ml F-MAPC compared with that of control. Conclusions : These results demonstrate that F-MAPC may be an ideal candidate for therapy of obesity and diabetes by disturbing the differentiation into adipocytes, as well as the inducement of intramuscular glucose uptake from blood.

• Journal of Integrative Natural Science
• /
• v.7 no.3
• /
• pp.149-158
• /
• 2014

The crystal structure of the title compounds with both coumarin and sulfonamide moieties were examined. These two groups have very special for their pharmaceutical and medicinal properties have been determined from single crystal X-ray diffraction data. In the title compound crystallizes in the monoclinic space group $P2_1/c$ with unit cell dimension a=$8.5775(4){{\AA}$, b=$24.9943(13){\AA}$ and c=$13.7319(7){\AA}$ [alpha & gamma=$90^{\circ}$ beta=$103.558(2)^{\circ}$]. In the structure The S1 atom shows a distorted tetrahedral geometry, with O1-S1-O2 [$121.08(1)^{\circ}$] and N1-S1-C5 [$105.85(1)^{\circ}$] angles deviating from ideal tetrahedral values are attributed to the Thrope-Ingold effect. The sum of bond angles around N1 ($354.9^{\circ}$) indicates that N1 is in $sp^2$ hybridization. The Pyridine ring adopts boat conformation and pyran rings adopt a sofa conformation. Crystal structure is stabilized by C-H...O intra molecular hydrogen bond interactions.

• Nuclear Engineering and Technology
• /
• v.44 no.3
• /
• pp.273-282
• /
• 2012

A new effective methodology for optimizing the enrichment of low-enriched zones as well as gadolinia fuel ($UO_2/Gd_2O_3$) rod designs in PLUS7 fuel assemblies was developed to minimize the maximum peak power in the core and to maximize the cycle lifetime. An automated link code was developed to integrate the genetic algorithm (GA) and the core design code package of ALPHA/PHOENIX-P/ANC and to generate and evaluate the candidates to be optimized efficiently through the integrated code package. This study introduces an optimization technique for the optimization of gadolinia fuel rod designs in order to effectively reduce the peak powers for a few hot assemblies simultaneously during the cycle. Coupled with the gadolinia optimization, the optimum enrichments were determined using the same automated code package. Applying this technique to the reference core of Ulchin Unit 4 Cycle 11, the gadolinia fuel rods in each hot assembly were optimized to different numbers and positions from their original designs, and the maximum peak power was decreased by 2.5%, while the independent optimization technique showed a decrease of 1.6% for the same fuel assembly. The lower enrichments at the fuel rods adjacent to the corner gap (CG), guide tube (GT), and instrumentation tube (IT) were optimized from the current 4.1, 4.1, 4.1 w/o to 4.65, 4.2, 4.2 w/o. The increase in the cycle lifetime achieved through this methodology was 5 effective full-power days (EFPD) on an ideal equilibrium cycle basis while keeping the peak power as low as 2.3% compared with the original design.