• 제목/요약/키워드: ${\Delta}E^*$

검색결과 1,733건 처리시간 0.027초

The Solvolysis of Benzoyl Chloride in Water-Acetone Mixtures Under High Pressure

  • Jee, Jong-Gi;Ree, Taik-Yue
    • Bulletin of the Korean Chemical Society
    • /
    • 제8권1호
    • /
    • pp.31-39
    • /
    • 1987
  • By using a complete rate constant($k_e$) which treats a solvent (water) as a reactant, and a conventional rate constant($k_c$), which ignores the solvent in describing the rate, the parameters ${\Delta}V^{\neq}_s,\;{\Delta}H^{\neq}_s\;and\;{\Delta}S^{\neq}_s$ were introduced. These quantities represent the volume change, the enthalpy change, and the entropy change accompanying the electrostriction which occurs when solvent molecules condense on the activated complex. The authors measured the rates of the solvolysis of benzoyl chloride in water-acetone mixtures at $15^{\circ}$ to $30^{\circ}C$ and 1 bar to 2500 bars. Applying the authors' theory to the experimental results, the parameters, ${\Delta}V^{\neq}_s,\;{\Delta}H^{\neq}_s\;and\;{\Delta}S^{\neq}_s$ were evaluated, and it was found that they are all negative, indicating that water dipoles condense on the activated complex. They also proposed the following equations: ${\Delta}H^{\neq}_c\;=\;{\Delta}H^{\neq}_e\;+\;{\Delta}H^{\neq}_s\;and\; {\Delta}S^{\neq}_c\;=\;{\Delta}S^{\neq}_e\;+{\Delta}S^{\neq}_s\;,\;where\;{\Delta}H^{\neq}_c\;and\;{\Delta}H^{\neq}_c\;and\;{\Delta}S^{\neq}_s $are the activation enthalpy change and the activation entropy change for the conventional reaction rate, respectively, and ${\Delta}H^{\neq}_e$ and ${\Delta}S^{\neq}_e$ are the corresponding quantities for the complete reaction rate. The authors proposed that for the $SN_1$ type, all the quantities, ${\Delta}V^{\neq}_s,\;{\Delta}S^{\neq}_s\;,{\Delta}H^{\neq}_s\;and\;{\Delta}S^{\neq}_s$ are comparatively large, and for the $SN_2$ type, these quantities are smaller than for the $SN_1$ type, and occasionally the case ${\Delta}S^{\neq}_e$ < 0 occurs. Using these criteria, the authors concluded that at high temperature, high pressure and for a high water content solvent, the SN_1$ type mechanism predominates whereas in the reversed case the $SN_2$M type predominates.

Carbamide peroxide의 함량에 따른 치아미백제의 치아에 대한 효과 (Effect of tooth bleaching agents on color of tooth depend on content of carbamide peroxide)

  • 정석민;남상용;곽동주
    • 대한치과기공학회지
    • /
    • 제23권1호
    • /
    • pp.85-93
    • /
    • 2001
  • The purpose of this study was to evaluate the effects of commercial home-tooth bleaching agents on the color of tooth. Twenty five sound extracted teeth were randomly divided into five groups. The color differences between before and after treatment with five types of tooth bleaching agents (7.5% hydrogen peroxide Nite White $Excel^{(R)}$, 10% carbamide peroxide Nite White $Excel^{(R)}$, 16% carbamide peroxide Nite White $Excel^{(R)}$, 10% carbamide peroxide Insta-BriteTM, 20% carbamide peroxide Insta-$Brite^{TM}$) were evaluated. The results were as follows: 1. By 2 week home tooth bleaching agent applications, the values ($L^*$) of bovine teeth increased as high as 4.38 $\sim$ 8.80 when comparing to those of the samples before treatment, and the color difference (${\Delta}E^*$) showed as high as 10.16 $\sim$ 15.04. 2. 16% carbamide peroxide Nite White Excel induced significantly greater ${\Delta}L^*$ than other test edgroups except for 7.5% hydrogen peroxide Day White Excel, and significantly greater ${\Delta}E^*$ than other tested groups by 2 week bleaching agent treatments (p<0.01). 3. 16% carbamide peroxide Nite White Excel(${\Delta}L^*$=8.80, ${\Delta}E^*$=15.04) induced significantly greater ${\Delta}L^*$ and ${\Delta}E^*$ than 10% carbamide peroxide Nite White Excel(${\Delta}L^*$=5.01, ${\Delta}E^*$=10.16)(p<0.01), but significant difference between 10% carbamide peroxide Insta-Brite(${\Delta}L^*$=4.38, ${\Delta}E^*$=10.51) and 20% carbamide peroxide Insta-Brite(${\Delta}L^*$=5.63, ${\Delta}E^*$=11.23) was not shown in ${\Delta}L^*$ and ${\Delta}E^*$(p>0.01). 4. 16% carbamide peroxide Nite White Excel(${\Delta}L^*$=8.80, ${\Delta}E^*$=15.04) which were applied in night time induced significantly greater ${\Delta}L^*$ and ${\Delta}E^*$ than 7.5% hydrogen peroxide Day White Excel(${\Delta}L^*$=8.47, ${\Delta}E^*$=12.75) which were applied in day time. Conclusions: These results demonstrate that all the commercial home-tooth bleaching agents have appreciable bleaching effect on teeth, and the effects of home-tooth bleaching agents which are used during night time are affected by content of carbamide peroxide. Especially the whitening effect of home tooth bleaching agents that are used through night time is greater than that of short time-applying tooth bleaching agent.

  • PDF

ON A GENERALIZED DIFFERENCE SEQUENCE SPACES DEFINED BY A MODULUS FUNCTION AND STATISTICAL CONVERGENCE

  • Bataineh Ahmad H.A.
    • 대한수학회논문집
    • /
    • 제21권2호
    • /
    • pp.261-272
    • /
    • 2006
  • In this paper, we define the sequence spaces: $[V,{\lambda},f,p]_0({\Delta}^r,E,u),\;[V,{\lambda},f,p]_1({\Delta}^r,E,u),\;[V,{\lambda},f,p]_{\infty}({\Delta}^r,E,u),\;S_{\lambda}({\Delta}^r,E,u),\;and\;S_{{\lambda}0}({\Delta}^r,E,u)$, where E is any Banach space, and u = ($u_k$) be any sequence such that $u_k\;{\neq}\;0$ for any k , examine them and give various properties and inclusion relations on these spaces. We also show that the space $S_{\lambda}({\Delta}^r, E, u)$ may be represented as a $[V,{\lambda}, f, p]_1({\Delta}^r, E, u)$ space. These are generalizations of those defined and studied by M. Et., Y. Altin and H. Altinok [7].

ANALYTIC TORSION FOR HOLOMORPHIC VECTOR BUNDLES

  • Kim, Hong-Jong
    • 대한수학회논문집
    • /
    • 제9권3호
    • /
    • pp.669-670
    • /
    • 1994
  • Let $E \to M$ be a hermitian holomorphic vector bundle over a compact (complex) hermitian manifold M of complex dimension n, and let $$ d"_p(E) : 0 \to A^{p,0}(E) \to A^{p,1}(E) \to \cdots \to A^{p,n}(E) \to 0$$ be the Dolbeault complex. Then $A^{p,q}(E)$ become a prehibert space so that the formal adjoint $\delta"$ of $d"$ and the "Laplacian" $\Delta" = \delta" d" + d" \delta"$ are defined.quot; d" + d" \delta"$ are defined.;$ are defined.

  • PDF

SPACE CURVES SATISFYING $\Delta$H = AH

  • Kim, Dong-Soo;Chung, Hei-Sun
    • 대한수학회보
    • /
    • 제31권2호
    • /
    • pp.193-200
    • /
    • 1994
  • Let x : $M^{n}$ .rarw. $E^{m}$ be an isometric immersion of a manifold $M^{n}$ into the Euclidean space $E^{m}$ and .DELTA. the Laplacian of $M^{n}$ defined by -div.omicron.grad. The family of such immersions satisfying the condition .DELTA.x = .lambda.x, .lambda..mem.R, is characterized by a well known result ot Takahashi (8]): they are either minimal in $E^{m}$ or minimal in some Euclidean hypersphere. As a generalization of Takahashi's result, many authors ([3,6,7]) studied the hypersurfaces $M^{n}$ in $E^{n+1}$ satisfying .DELTA.x = Ax + b, where A is a square matrix and b is a vector in $E^{n+1}$, and they proved independently that such hypersurfaces are either minimal in $E^{n+1}$ or hyperspheres or spherical cylinders. Since .DELTA.x = -nH, the submanifolds mentioned above satisfy .DELTA.H = .lambda.H or .DELTA.H = AH, where H is the mean curvature vector field of M. And the family of hypersurfaces satisfying .DELTA.H = .lambda.H was explored for some cases in [4]. In this paper, we classify space curves x : R .rarw. $E^{3}$ satisfying .DELTA.x = Ax + b or .DELTA.H = AH, and find conditions for such curves to be equivalent.alent.alent.

  • PDF

유압 서보 모터를 위한 $e-{\Delta}e$ 위상평면을 이용한 이중 퍼지 로직 제어기 설계 (Design of Dual Fuzzy Logic Controller using $e-{\Delta}e$ Phase Plane for Hydraulic Servo Motor)

  • 신위재;문정훈
    • 융합신호처리학회논문지
    • /
    • 제8권3호
    • /
    • pp.222-226
    • /
    • 2007
  • 본 연구에서는 응답의 과도영역에서 특징점의 각 영역과 $e-{\Delta}e$ 위상평면을 이용하여 이중 퍼지룰을 구성하였다. 구성된 퍼지 제어룰은 기본 퍼지제어 룰에 비해 상승시간, 지연시간, 최대오브슈트 등을 줄일 수 있었으며 퍼지 룰의 제안방법은 $e-{\Delta}e$ 위상평면에서 하나의 퍼지룰은 과도영역에서 정상상태오차를 일으키고 다른 퍼지 제어 룰은 정상상태오차를 감소시키고 수렴영역에서 빠르게 수렴하도록 교대로 사용한다. 또한 $e-{\Delta}e$ 위상평면에서의 두 개의 퍼지 룰은 플랜트의 응답 특성에 따라 교체시기를 결정한다. DSP 프로세서를 사용하는 유압서보 모터 제어시스템을 통한 실험의 결과로서 제안된 이중 퍼지 제어 룰은 기본 퍼지 제어 룰에 비해 빠른 상승시간, 정정시간등 양호한 응답을 얻을 수 있음을 확인하였다.

  • PDF

${La_{1-x}Sr_{x}B_{1-{\gamma}}Fe_{\gamma}O_{3-{\delta}}$(B=Co, Ga) 페롭스카이트 세라믹 분리막의 제조 및 산소투과특성 (Fabrication and Oxygen Permeation Properties of ${La_{1-x}Sr_{x}B_{1-{\gamma}}Fe_{\gamma}O_{3-{\delta}}$(B=Co, Ga) Perovskite-Type Ceramic Membranes)

  • 임경태;조통래;이기성;한인섭;서두원
    • 멤브레인
    • /
    • 제11권4호
    • /
    • pp.143-151
    • /
    • 2001
  • 고상 반응법을 이용하여 L $a_{0.6}$S $r_{0.4}$ $Co_{0.2}$F $e_{0.8}$ $O_{3-}$$\delta$/ 및 L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ 분말을 합성하고 혼합전도체 분리막을 소결하여 제조하였다. 제조된 분리막들은 정확한 페롭스카이트 결정구조를 나타내었으며, 95% 이상의 높은 상대밀도를 나타내었다. 산소이온 변환 능력을 향상시키기 위해 L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ disk의 양 표면에 L $a_{0.6}$S $r_{0.4}$Co $O_{3-}$$\delta$/ paste를 스크린 프린팅 방법으로 코팅하였으며 코팅 막은 비교적 치밀한 미세구조를 나타내었다. 코팅되지 않은 L $a_{0.6}$S $r_{0.4}$ $Co_{0.2}$F $e_{0.8}$ $O_{3-}$$\delta$/ 및 L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ 분리막과 코팅된 L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ 분리막의 산소투과 성능을 비교 실험한 결과, 90$0^{\circ}C$에서 L $a_{0.6}$S $r_{0.4}$ $Co_{0.2}$F $e_{0.8}$ $O_{3-}$$\delta$/ 분리막이 정상상태에서 0.266 mL/min.$\textrm{cm}^2$로 가장 많은 투과량을 보였으며 코팅된 L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ 분리막의 정상상태 산소 투과 유속은 최고 0.19 mL/min.$\textrm{cm}^2$ 정도로 코팅되지 않은 분리막에 비해 약 2~3배로 높게 나타났다.정도로 코팅되지 않은 분리막에 비해 약 2~3배로 높게 나타났다.코팅되지 않은 분리막에 비해 약 2~3배로 높게 나타났다. 높게 나타났다.

  • PDF

오버샘플링 시그마-델타 변환기의 설계와 응용 (The Design and Application of Oversampling Sigma-Delta Converters)

  • 신종한;박송배
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1991년도 하계학술대회 논문집
    • /
    • pp.861-865
    • /
    • 1991
  • Sigma delta modulation has been the preferred technique for oversampling conversion. In this paper we present the basic principles of oversampled sigma-delta Converters. Basic operation and theory behind sigma-delta modulation is reviewed. The different structures of the sigma-delta converters are described and the concepts of designing modulators and digital filters are discussed. The latest designs are also reviewed.

  • PDF

Color alterations of a PMMA resin for fixed interim prostheses reinforced with silica nanoparticles

  • Kotanidis, Alexandros;Kontonasaki, Eleana;Koidis, Petros
    • The Journal of Advanced Prosthodontics
    • /
    • 제11권4호
    • /
    • pp.193-201
    • /
    • 2019
  • PURPOSE. The aim of the present study was to evaluate the color changes of an autopolymerizing PMMA resin used for interim fixed restorations, reinforced with $SiO_2$ nanoparticles. MATERIALS AND METHODS. Silica nanoparticles were blended with the PMMA resin powder through high-energy ball milling. Four shades of PMMA resin were used (A3, B3, C3, D3) and total color differences were calculated through the equations ${\Delta}E_{ab}=[({\Delta}L*)^2+({\Delta}a*)^2+({\Delta}b*)^2]^{1/2}$ and ${\Delta}E_{00}=[(\frac{{\Delta}L^{\prime}}{K_LS_L})^2+(\frac{{\Delta}C^{\prime}}{K_CS_C})^2+(\frac{{\Delta}H^{\prime}}{K_HS_H})^2+R_T(\frac{{\Delta}C^{\prime}}{K_CS_C})(\frac{{\Delta}H^{\prime}}{K_HS_H})]^{1/2}$. Statistically significant differences between ${\Delta}E_{ab}$ and the clinically acceptable values of 3.3 and 2.7 and those between ${\Delta}E_{00}$ and the clinically acceptable value of 1.8 were evaluated with one sample t-test (P<.05). Differences among the different shades were assessed through One-Way ANOVA and Bonferroni multiple comparison tests. RESULTS. Significantly lower values were detected for all groups concerning ${\Delta}E_{ab}$ compared to the intraorally clinical acceptable values of 3.3 and 2.7. Significantly lower mean values were detected for groups B3, C3, and D3, concerning ${\Delta}E_{00}$ compared to the intraorally clinical acceptant value of 1.8. Color pigments in red-brown (A3) and red-grey (D3) shades affect the total color change to a greater extent after the reinforcement with $SiO_2$ nanoparticles compared to the red-yellow (B3) shade. CONCLUSION. Within the limitations of this in vitro study, it can be suggested that reinforcing PMMA with $SiO_2$ nanoparticles at 0.25 wt% slightly affects the optical properties of the PMMA resin without being clinically perceivable.

전압벡터의 유효분 감도지표 dP/de 수정법에 의한 견고한 전압안정도 평가에 관한 연구 (Robust algorithm for estimating voltage stability by the modified method of sensitivity index dP/de of real value on voltage vector)

  • 송길영;김세영;김용하
    • 대한전기학회논문지
    • /
    • 제45권1호
    • /
    • pp.1-8
    • /
    • 1996
  • Recently, much attention has been paid to problems which is concerned with voltage instability phenomena and much works on these phenomena have been made. In this paper, by substituting d $P_{k}$ d $e_{k}$ ( $v^{\rarw}$= e +j f) for $P_{k}$ in conventional load flow, direct method for finging the limit of voltage stability is proposed. Here, by using the fact that taylor se- ries expansion in .DELTA. $P_{k}$ and .DELTA. $Q_{k}$ is terminated at the second-order terms, constraint equation (d $P_{k}$ d $e_{k}$ =0) and power flow equations are formulated with new variables .DSLTA. e and .DELTA.f, so partial differentiations for constraint equation are precisely calculated. The fact that iteratively calculated equations are reformulated with new variables .DELTA.e and .DELTA.f means that limit of voltage stability can be traced precisely through recalculation of jacobian matrix at e+.DELTA.e and f+.DELTA.f state. Then, during iterative process divergence may be avoid. Also, as elements of Hessian mat rix are constant, its computations are required only once during iterative process. Results of application of the proposed method to sample systems are presented. (author). 13 refs., 11 figs., 4 tab.

  • PDF