• 한국의류학회지
• /
• 제9권2호
• /
• pp.13-26
• /
• 1985

In this study, when cotton fabrics dyed with Direct dyes are treated under various resin concentration 2, 4, 8, 12, $14\%$ with ureaformaldehyde(UF) and melamineformaldehyde(MF) resin which can be imparted the crease recovery to textiles, chang of properties on lightfastness, washfastness, crease recovery, breaking strength, etc. and color changes are investigated. the results are as follows 1) Color difference(${\Delta}$E) increased but K/S value decreased according to the increase of resin cone. such tendency showed that MF treated fabrics and soaping fabrics were evident than UF treated fabrics and non-soaping fabrics. 2) In lightfastness, ${\Delta}$E and K/S value of resin treated fabrics were reduced as compared with untreated fabrics according to the increase of resin cone. The lower ${\Delta}$E and K/S value of MF than ${\Delta}$E and K/S value of UF showed low lightfastness of MF. pH of resin treted fabrics was almost unaffected with lightfastness. 3) In washfastness, ${\Delta}$E and K/S value of resin treated fabrics decreased slightly as com-pared with untreated fabricsaccording tothe increase of resin cone. The ${\Delta}$E and K/S value of MF decreased lower than UF. But in the case of the higher resin cone. than about $8\%$, they were not almost differentiated. 4) As resin cone. increased, crease recovery considerably increased but breaking strength and elongation decreased. The fabrics treated with UF were good crease recovery, whereas the fabrics treated with MF were good breaking strength. 5) Soaping appeared to improve the lightfastness, washfastness, crease recovery but appeared to work adverse effect on breaking strength.

• 한국산학기술학회논문지
• /
• 제16권2호
• /
• pp.1563-1570
• /
• 2015

본 연구는 올리고펩티드의 연쇄성장 과정에서의 배좌의 변화를 조사하기 위하여 알라닌 올리고머 모델의 2량체 부터 5량체 까지 양자화학 계산(QCC)에 의한 구조최적화 계산을 하였다. 말단기의 영향을 확인하기 위하여 N말단 및 C말단이 공히 amide 구조를 갖는 "amide type" ($CH_3CONH-and-CONHCH_3$)과 N말단만이 methyl 구조를 갖는 "methyl type" ($CH_3NH-and-CONHCH_3$)의 2종류 모델을 준비하였다. 5량체 까지의 구조 최적화 계산 결과 3종류의 형태이성질체로 수렴이 되었다. 안정성이 높은 순서로 각각 ${\alpha}$ 나선형, PPII 유사형, ${\beta}$ 확장형으로 나타났으며, 사슬회전 방향이 서로 반대인 형태이성질체간의 에너지 값은 동일하게 나타났다 (5량체, "amide type" 좌 우회전형: ${\Delta}E=-1.05$, "methyl type" 좌 우회전형: ${\Delta}E=-1.62$). ${\alpha}$ 나선형의 모노머 단위당 에너지변화(${\Delta}E$)는 모노머의 증가와 함께 감소하였다.

• 한국식품과학회지
• /
• 제32권5호
• /
• pp.1149-1157
• /
• 2000

고추장 변색 요인을 확인하기 위하여 전통적인 방법으로 떡고추장과 식혜고추장을 만들고 가열처리, 포장중 질소치환 및 U.V 조사여부에 따른 변화를 관찰하였다. 각 고추장의 색도 변화는 일반적으로 숙성기간이 경과됨에 따라 L, a, b값은 감소하고 ${\delta}E$ 값은 증가하는 경향을 보였다. 그 중 떡고추장의 ${\delta}E$ 값은 자외선 조사구에서 다른 처리구에 비하여 높았고 식혜고추장의 ${\delta}E$ 값은 비열처리구에서 전반적으로 높게 나타났다. 갈변 요인 분석에서는 떡고추장의 주요 갈변 요인으로는 빛이, 식혜고추장에서는 열처리와 빛이 작용하였으며 각각의 갈변 요인들이 상호 작용함으로 서 고추장의 갈변에 관여함을 확인하였다. 고추장 추출물의 흡광도 변화에서는 고추장을 아세톤으로 추출하여 흡광도를 측정한 결과 $450{\sim}470$ nm에서, 물 추출물의 흡광도는 $200{\sim}205$ nm에서 가장 최고치를 나타내었다.

• Journal of Microbiology and Biotechnology
• /
• 제23권6호
• /
• pp.766-770
• /
• 2013

Several upstream activators required for proper activation of brlA are involved in the development, vegetative growth, toxin production, and pathogenesis of Aspergillus fumigatus. In this study, we characterized the roles of two upstream developmental regulators, A. fumigatus flbB (AfuflbB) and flbE (AfuflbE), in toxin production and virulence. The deletion of AfuflbB and AfuflbE resulted in reduction of the expression of AfulaeA. Moreover, only about 8% to 10% of fumagillin was produced in the two mutants compared with that of wild type, and ${\Delta}AfuflbB$ strain produced 85% of gliotoxin compared with wild type, whereas none was produced by ${\Delta}AfuflbB$. Flow-cytometric analysis revealed decreased necrotic and apoptotic polymorphonuclear leukocytes cell death after exposure to supernatants from ${\Delta}AfuflbB$ and ${\Delta}AfuflbB$ strains compared with the wild type. These results indicate that FlbB and FlbE are necessary for the proper laeA expression, toxin production, and virulence of A. fumigatus.

• 대한치과보철학회지
• /
• 제39권5호
• /
• pp.477-491
• /
• 2001

The purpose of this study is to compare and analyze the shade changes(${\Delta}E^*$) about $In-Ceram^{(R)}$, $IPS-Empress^{(R)}$, $OPC^{(R)}$ by using of the spectrophotometer arising from inital status and before and after cementation of the resin cement mounted on the metal core. We used a couple of statistics such as 'One- Way ANOVA' and 'Multiple Range Test.' We could be able to verify significantly what is being discussed here up to 95%. The results drawn from our research are as follows : 1. At the time of our experiments regarding the initial shapes of all-ceramic and mounting status of all-ceramic on the metal crown(${\Delta}E^*1$), and a comparison of mounting of all ceramic on the metal crown with all-ceramic cemented on the metal core(${\Delta}E^*2$), at the time of shade change of initial shapes and after we cemented on the metal core. (1) no significant difference among all-ceramics was found. (2) no particular difference was found regarding the $In-Ceram^{(R)}$. (3) a significant difference between the ${\Delta}E^*1$ and ${\Delta}E^*2$ regarding the $IPS-Empress^{(R)}$ was found(P<0.05). (4) a significant difference between the ${\Delta}E^*1$ and ${\Delta}E^*2$ regarding the $OPC^{(R)}$ was found(P<0.05). 2. When we compared the shade changes(${\Delta}E^*$) resulted from before and after the cementation on each of the parts involved of some all-ceramic, we could be able to find shade change increase form incisal third, middle third. and cervical third in that order in $In-Ceram^{(R)}$(spinell), IPS $Empress^{(R)}$, and $OPC^{(R)}$ all. In addition. we could be able to find a significant difference between cervical third and incisal third, middle third. (P<0.05) From what we have just seen, we might conclude that there is a significant shade change difference before and after the cementation with respect to $IPS-Empress^{(R)}$ and $OPC^{(R)}$. In addition, we could also be able to find more shade change difference at the cervical third rather than incisal third and middle third depending on the parts involved.

• Kyungpook Mathematical Journal
• /
• 제56권3호
• /
• pp.777-789
• /
• 2016

In this paper, we establish some new oscillation criteria for the second-order forced nonlinear functional dynamic equations with damping term $$(r(t)x^{\Delta}(t))^{\Delta}+q({\sigma}(t))x^{\Delta}(t)+p(t)f(x({\tau}(t)))=e(t)$$, and $$(r(t)x^{\Delta}(t))^{\Delta}+q(t)x^{\Delta}(t)+p(t)f(x({\sigma}(t)))=e(t)$$, on a time scale ${\mathbb{T}}$, where r(t), p(t) and q(t) are real-valued right-dense continuous (rd-continuous) functions [1] defined on ${\mathbb{T}}$ with p(t) < 0 and ${\tau}:{\mathbb{T}}{\rightarrow}{\mathbb{T}}$ is a strictly increasing differentiable function and ${\lim}_{t{\rightarrow}{\infty}}{\tau}(t)={\infty}$. No restriction is imposed on the forcing term e(t) to satisfy Kartsatos condition. Our results generalize and extend some pervious results [5, 8, 10, 11, 12] and can be applied to some oscillation problems that not discussed before. Finally, we give some examples to illustrate our main results.

• 대한화학회지
• /
• 제43권2호
• /
• pp.141-149
• /
• 1999

Fe(II) 및 Ni(II) 이온에 $NH_3$ 리간드를 배위시켜 분자역학(MM2)법으로 최소에너지를 갖는 구조를 구한 후 확장분자궤도함수(EHMO)법 및 ZINDO/1법으로 양자화학적 양을 얻어 실험적 사실과 비교 검토하였다. 즉, 팔면체인 $[M(H_2O)_{6-x}(NH_3)_x]^{2+}(M=Fe(II),\;Ni(II)(x=0,\;1,\;…,\;6)에서 $NH_3$ 분자가 $H_2O$ 분자와 단계적으로 치환될 때에 따른 실측리간드화열이 MO 이론으로 계산한 팔면체형인 Fe(II)및 Ni(II)착물의 양자화학적 양인 중심금속의 알짜전하, 형성엔탈피, 총결합에너지로부터 실측 리간드화열$({\Delta}H_{obs})$을 이론적으로 예측할 수 있는 ${\Delta}H_{obs}=-0.2858_{qFe}+0.8813(r=0.97),\;{\Delta}H_{obs}=-0.8981_{qNi}+1.7929(r=0.95),\;{\Delta}H_{obs}=-0.0031H_{f(Fe)}+0.5725(r=0.97),\;{\Delta}H_{obs}=-0.0095H_{f(Ni)}+0.9193(r=0.97),\;{\Delta}H_{obs}=0.0476E_{diss(Fe)}+0.6434(r=0.94),\;{\Delta}H_{obs}=0.1401E_{diss(Ni)}+1.1393(r=0.93)$인 이론식을 각각 얻었다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.94-97
• /
• 2004

Micro/nano-sized L $a_{0.6}$S $r_{0.4}$Co $O_{3-}$$\delta$/ particles are considered to improve oxygen permeability in highly selective inorganic oxygen separation membrane. A L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membrane with perovskite structure is fabricated by a conventional solid-state reaction. As the oxygen permeation flux of the L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membrane was lower than commercial gas separation membranes, we coated the L $a_{0.6}$S $r_{0.4}$Co $O_{3-}$$\delta$/ particles to enhance the oxygen permeation flux. It has been demonstrated that the effective area of reactive free surface is an important factor in determining the effectiveness of the introduction of coating layer for oxygen permeation. The introduction of micro/nano L $a_{0.6}$S $r_{0.4}$Co $O_{3-}$$\delta$/ particles was very effective for increasing oxygen flux, as the flux was as much as 2 to 6 times higher than that of an uncoated L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membrane.\delta$/ membrane.>/ membrane.brane.

• Journal of applied mathematics & informatics
• /
• 제22권1_2호
• /
• pp.435-440
• /
• 2006

Let G be a simple graph with vertex set V(G) and edge set E(G). A subset S of E(G) is called an edge cover of G if the subgraph induced by S is a spanning subgraph of G. The maximum number of edge covers which form a partition of E(G) is called edge covering chromatic number of G, denoted by X'c(G). It is known that for any graph G with minimum degree ${\delta},\;{\delta}-1{\le}X'c(G){\le}{\delta}$. If $X'c(G) ={\delta}$, then G is called a graph of CI class, otherwise G is called a graph of CII class. It is easy to prove that the problem of deciding whether a given graph is of CI class or CII class is NP-complete. In this paper, we consider the classification of nearly bipartite graph and give some sufficient conditions for a nearly bipartite graph to be of CI class.

• Restorative Dentistry and Endodontics
• /
• 제40권4호
• /
• pp.255-261
• /
• 2015

Objectives: The aim of this study was to evaluate the effect of three different drinks on the color parameters of four different restorative materials. Materials and Methods: Three different composites (Filtek Ultimate Universal Restorative, Filtek Ultimate Flowable, and Filtek Silorane, 3M ESPE) and a polyacid-modified composite resin material (Dyract XP, Dentsply DeTrey GmbH) were evaluated. Eighty-four disc-shaped specimens of 8 mm in diameter and 2 mm in thickness were prepared (n = 21 each). Color coordinates ($L^*a^*b^*$, ${\Delta}L^*$, ${\Delta}a^*$, ${\Delta}b^*$, and ${\Delta}E^*$) were measured using a $V{\dot{I}}TA$ Easyshade Compact ($V{\dot{I}}TA$ Zahnfabrik) after 24 hr of storage (baseline) and after 30 day of storage in three different beverages of black tea, Coca cola, or water (control) (n = 7). In each beverage, the specimens were stored three times a day, one hr each, for 30 day. The color changes (${\Delta}E$) were calculated and were analyzed by Kruskal-Wallis and Dunn multiple comparison test. Results: The color difference (${\Delta}E^*$) of the resin materials ranged between 1.31 and 15.28 after 30 day of immersion in the staining solutions. Dyract XP in Coca cola ($15.28{\pm}2.61$) and black tea ($12.22{\pm}2.73$) showed the highest mean ${\Delta}E^*$ value after 30 day, followed by Filtek Ultimate Universal Restorative ($5.99{\pm}1.25$) and Filtek Ultimate Flowable ($4.71{\pm}1.40$) in black tea (p < 0.05). Conclusions: The compomers displayed unacceptable color changes at the end of 30 day in all beverages. Among resin composites, the silorane based composite exhibited relatively good color stability than the others. Filtek Ultimate Universal Restorative and Filtek Flowable showed similar color changes in all beverages.