• 전기화학회지
• /
• 제11권3호
• /
• pp.154-158
• /
• 2008

The synthesis of hollow ${Sb_93}{Pt_7}$ nanospheres smaller than 30 nm with a shell consisting of smaller nanoparticles, with an average particle size of ${\sim}$ 3 nm is reported. The formation of this alloy is driven by galvanic replacement reaction involving Sb nanoparticles and ${H_2}{PtCl_6} $ without need for any additional reductants. Further, the reaction proceeds selectively as long as the redox potential between two metals is favorable. The capacities of the hollow samples are 669 and 587mAh/g at rates of 1 and 7C, respectively, while those values for the nanoparticles are 647 and 480mAh/g at rates of 1, 7C, respectively. This result shows the significantly improved capacity retention of the hollow sample at higher C rates, indicating that high surface area of the hollow nanospheres makes the current density more effective than that for the solid counterpart.

• Journal of Radiation Protection and Research
• /
• 제24권1호
• /
• pp.39-43
• /
• 1999

최근 개발된 감도가 좋은 LiF:Mg,Cu,Na,Si TL물결을 Teflon과 혼합한 후, 않은 디스크 형태로 압축 성형한 얇은 LiF:Mg,Cu,Na,Si Teflon 검출기를 제작하고 베타선 검출기로서의 TL 반응특성을 연구하였다. 한국원자력연구소의 $^{147}Pm,\;^{204}Tl$ 및 $^{90}Sr/^{90}Y$ 베타선원을 이용하여 두께 $2mg/cm^2$인 Kapton 박막을 덮은 상태로 베타선을 조사하였다. 제작한 않은 LiF:Mg,Cu,Na,Si 검출기들의 $^{137}Cs$에 대한 batch 균질성은 4.7%, 베타선에 대한 선량의존성은 0.1 mGy에서 100 Gy까지 선형성을 나타내고, 에너지의존성은 $^{147}Pm,\;^{204}Tl$ 및 $^{90}Sr/^{90}Y$ 베타선에 대해 각각 0.46, 1.09 및 1.06 이었다. 그리고 베타선에 대한 방향의존성은 $0.93{\pm}0.03\;(^{147}Pm),\;0.94{\pm}0.04\;(^{204}Tl)$ 및 $0.92{\pm}0.05\;(^{90}Sr/^{90}Y)$으로, 이들 얇은 LiF:Mg,Cu,Na,Si 검출기들에 대한 TL 반응특성의 결과는 국제표준기구(ISO)의 베타선량계 기준을 잘 만족하였다.

• 한국동물학회:학술대회논문집
• /
• 한국동물학회 1999년도 한국생물과학협회 학술발표대회
• /
• pp.150.2-150
• /
• 1999

To investigate the weathering soil buffering capacities of the artificial acidic precipitation, the weathering soils and their leachate solutions were sampled from the host rocks(granite;GR, rhyolite;RH, gabbro;GA, basalt;BA, two serpentinite;SE1, SE2 and limestone;LI) and analyzed for pH and chemical properties. 1n the soil pH of the GR and RH ,the acidic rocks, were 5.02 and 5.95, respectively. And the GA and BA, basic rocks, were 6.52 and 7.57. The SE1 and SE2 were 8.90 and 8.89. While the LI was 7.84. These results means the typical soil pH properties by host rocks. After the artificial acidic precipitation input 5OOml, the average changes of soil leachate solutions treated by pH levels(pH 5.0, 4.0 and 3.0), were pH 5.73, 5.00 and 4.40. in GR soil, and pH 6.19, 5.99 and 5.57 in RH. GA were pH 6.31, 6.04 and 5.86, BA were pH 7.05, 6.85 and 6.56 and SE1 were pH 8.31, 8.26 and 7.71. SE2 were pH 8.29, 8.24 and 7.96. LI were pH 7.55, 7.46 and 6.79. The soil leachate pHs from volcanic rocks were higher than those from the plutonic rocks and GR soils showed greater response than other soils. With increasing 100ml input-solution, the soil leachate pHs were mainly decreased. Cation concentrations, CEC, EC and total nitrogen concentrations of RH and BA soils, the volcanic rocks, were higher than those of GR and GA soil, the plutonic rocks. On the contrary, Al concentrations of the GR and GA soils were higher than those of RH and BA soils, partly because of high quartz content in GR and Al content in the biotite and plagioclase in GA.

• Korean Chemical Engineering Research
• /
• 제52권3호
• /
• pp.340-346
• /
• 2014

Continuous and dense ZIF-7 membranes were successfully synthesized on ${\alpha}-Al_2O_3$ porous substrate via two-step crystallization technique. ZIF-7 seeding layer was first deposited on porous ${\alpha}-Al_2O_3$ substrate by in-situ low temperature crystallization, and then ZIF-7 membrane layer can be grown through the secondary high-temperature crystallization. Two synthesis solutions with different concentration were used to prepare ZIF-7 seeding layer and membrane layer on porous ${\alpha}-Al_2O_3$ substrate, respectively. As a result, a continuous and defect-free ZIF-7 membrane layer can be prepared on porous ${\alpha}-Al_2O_3$ substrate, as confirmed by scanning electron microscope. XRD characterization shows that the resulting membrane layer is composed of pure ZIF-7 phase without any impurity. A single gas permeation test of $H_2$, $O_2$, $CH_4$ or $CO_2$ was conducted based on our prepared ZIF-7 membrane. The ZIF-7 membrane exhibited excellent H2 molecular sieving properties due to its suitable pore aperture and defect-free membrane layer.

• 공업화학
• /
• 제7권5호
• /
• pp.1015-1019
• /
• 1996

알루미나에 LiBr와 $CaBr_2$를 각각 흡착시켜 용매가 없는 상태에서 여러 가지 염화 알킬과 반응시켜 좋은 수득률로 해당하는 브롬화 생성물을 얻을 수 있었다. 이러한 높은 반응성은 알루미나에 흡착되어 있는 극소량의 물과 브롬화 금속간의 상호작용이 알루미나 상에서 일어날 수 있기 때문이라는 것을 Differential scanning calorimetry (DSC) 열분석 실험과 문헌을 통하여 고찰하였다.

• 한국세라믹학회지
• /
• 제30권7호
• /
• pp.543-548
• /
• 1993

Stability and formation of Pb(Mg1/3Nb2/3)O3 (PMN) phase synthesized in Li2SO4-Na2SO4 molten salts have been investigated. And powder characteristics of PMN have been studied with a variation of processing parameters such as temperature, time, amount of the salts, and excess PbO. More ratio of Li2SO4 to Na2SO4 influences the percentage of perovskite phase due to the difference of the eutectic point of the salts, but does not influence the powder characteristics. The shape of PMN particles shows faceted morphology with bimodal distribution consisting with large and submicron parts. Particle size of PMN increased greatly with increasing soaking time or amount of salts rather than temperature. The addition of excess PbO resulted in round PMN crystallites without submicron particles. These results are discussed by XRD, SEM and thermal analyses.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.252-254
• /
• 2002

In this study, polyurethane acrylate macromer was synthesized and it was used in a gel polymer electrolyte, and then its electrochemical performances were evaluated. LiCoO$_2$/GPE/MCF cells were also prepared and their performances depending on discharge currents and temperatures were evaluated. ionic conductivity of the gel polymer electrolyte with PUA at room temperature and -20$^{\circ}C$ was ca. 4.5 x 10$\^$-3/ S/cm and 1.7${\times}$10$\^$-3/ S/cm, respectively. GPE was stable electrochemically up to 4.5 V vs. Li/Li$\^$+/. LiCoO$_2$/GPE/MCF cell showed a good high-rate and a low-temperature performance.

• 전자공학회논문지D
• /
• 제35D권7호
• /
• pp.109-116
• /
• 1998

In this work was produced and analyzed a z-cut Ti:LiNbO$_{3}$ optical waveguide which applies for various optical devices.A waveguide channel with a thickness 8 .mu.m and a length 66,000.mu.m and a mach-zehnder interferometer type waveguide were fabricated at a diffusion temperature 1050.deg. C for 6-8hours in a wet $O_{2}$ environment. The resulting Ti:LiNbO$_{3}$ optical waveguide was measured to have a Ti-strip thickness of 950.angs. and low loss. Surfaces and cross-sections of a fabricated waveguide were analysed. The mode pattern anaysis revealed that the waveguide showed a single mode at a 1550nm wavelength. The effective dimension of the waveguide was calculated by measuring a gaussian profile; Wx=10.95.mu. and Wy=9.14.mu.m. a propagation loss, of 0.50dB/cm for a TM mode and 0.45dB/cm for a TE mode, was low enough to be accepatable for optical devices.

• 한국전기전자재료학회논문지
• /
• 제15권12호
• /
• pp.1033-1038
• /
• 2002

In this study, urethane acrylate macromer was synthesized and it was used in a gel polymer electrolyte (GPE), and then its electrochemical performances were evaluated. LiCoO$_2$/GPE/graphite cells were Prepared and their performances depending on discharge currents and temperatures were evaluated. The precursor consisting of urethane acrylate (UA), hexanediol dimethacrylate (HDDA) and benzoyl peroxide (BPO) had a low viscosity relatively ionic conductivity of the gel polymer electrolyte with UA at room temperature and -20$\^{C}$ was ca. 4.5 $\times$ 10$\^$-3/S$.$cm$\^$-1/ and 1.7 x 10$\^$-3/ S$.$cm$\^$-1/, respectively GPR was stable electrochemically up to potential of 4.i V vs. Li/Li$\^$+/. LiCoO$_2$/GPE/graphite cells showed good a high-rate and a low-temperature performance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.40-43
• /
• 1996

Substrates of SAW filter are mainly single crystal such as LiNbO$_3$, LiTaO$_3$. However, fabrication of crystal is difficult and cost is very high. In this study, crystal was substituted for piezoelectric ceramics which has simple fabrication process. The same SAW filter mask was photolithographed on crystal(LiNbO$_3$) substrate and ceramic(PZT4, PZT5A and PZT8) substrate in order to compare experimental value with theoretical value. The difference of center frequency was only 3.7%. PZT8 showed good bandwidth properties. It is considered that PZT8 has higher mechanical quality factor and propagation velocity than PZT4, PTT5A.