• Resources Recycling
• /
• v.6 no.1
• /
• pp.11-16
• /
• 1997

The extraction of aluminum from coal fly nsh wa studied using H,SO, and CaF, as leachants Aluminum was effectively extracted by HF formed &om the reaction of H,SO, and CaF, which decomposed the mullite in fly ash. The cffeas of H,SO' and CaFi concentration, reaction temperature, and reacliou time on aluminum extraction were investigated. 97% of aluminum was extracted by 4 M H:SO, and 0.5 M CaF, at 106$^{\circ}$C for 10 houci.

• Bulletin of the Korean Chemical Society
• /
• v.10 no.2
• /
• pp.132-133
• /
• 1989

To probe the geometrical effects of cyclopropyl moiety on the stabilization of an adjacent cation center, chemical shift of 2-p-fluorophenyl-8,9-dehydro-2-adamantyl cation (3) was compared with that of 5-p-fluorophenyl-2,4-dehydro-5-homoadamantyl cation (4). Difference between the chemical shift of 8,9-dehydro-2-adamantyl cation 3 and that of 2,4-dehydro-5-adamantyl cation 4 is 5.1 ppm (${\Delta}{\Delta}{\delta}$). We conclude, therefore, that ion 3 is about 3.82 kcal more stadble than ion 4 of which rigid carbon skeleton requires significant distortion of the cyclopropane ring from the ideal bisected conformation. The energy difference between these cations can be calculated by Taft-Relationship$^8$ on the basis of chemical shift.

• Korean Journal of Materials Research
• /
• v.23 no.9
• /
• pp.537-542
• /
• 2013

Two types of Tb- and Na-substituted green phosphors $Ca_{(1-1.5x)}WO_4:Tb_x^{3+}$: and $Ca_{(1-2x)}WO_4:Tb_x^{3+},Na_x^+$ were synthesized with various x values, using a solid-state reaction. The former phosphors contained both substitutional and vacancy point defects, while the later had only substitutional defects. X-ray diffraction results showed that the main diffraction peak, (112), was centered at $2{\theta}=28.72^{\circ}$ and indicated that there was no basic structural deformation caused by substitutions or vacancies. The photoluminescence emission and photoluminescence excitation spectra revealed the optical properties of trivalent terbium ions, $Tb^{3+}$. Typical transitions, $^5D_3{\rightarrow}^7F_6,\;^7F_5,\;^7F_4$ and $^5D_4{\rightarrow}^7F_6,\;^7F_5,\;^7F_4,\;^7F_3$, and cross relaxations were observed. Subtle differences in the photoluminescence of green phosphors were observed as a result of the point defects. The FT-IR spectra indicated that some of the ungerade vibrational modes had shifted positions and changed shapes, spreading out over a wide range of frequencies. This change can be attributed to the different masses of $Tb^{3+}$ and $Na^+$ ions and $V_{Ca}$" vacancies compared to $Ca^{2+}$ ions. The gerade normal modes of the Raman spectra exhibited subtle differences resulting from point defects in $Ca_{(1-1.5x)}Tb_xWO_4$ and $Ca_{(1-2x)}Tb_xNa_xWO_4$.

• Journal of the Korean Magnetics Society
• /
• v.11 no.2
• /
• pp.58-62
• /
• 2001

The L $i_{0.5}$F $e_{2.5-x}$A $l_{x}$ $O_4$ systems (x=0, 0.3, 0.6, 0.9, 1.2, 1.5) were investigated by X-ray diffraction and Mossbauer spectroscopy. The structure of all the samples is cubic spinel type and lattice constant decrease with increasing Al content x. The Moissbauer spectra reveal two sextet for 0$\leq$x$\leq$0.6, two sextet and a doublet for 0.9$\leq$x$\leq$1.2, and a doublet for x=1.5. The cation distribution of the samples is (L $i_{1-a}$$^{+}$F $e_{a}$ $^{3+}$)$^{A}$[L $i_{a-0.5}$$^{+}$A $l_{2.5-a-x}$$^{+}$F $e_{2.5-a-x}$$^{3+}$]$^{B}$ $O_4$$^{2-}$ and substituted $Al^{3+}$ ions decrease the covalency of F $e^{3+}$- $O^{2-}$ bond in B-sites and A-B super-exchange interactions.tions.s.tions.ons.s.

• Journal of the Korean Ceramic Society
• /
• v.37 no.6
• /
• pp.552-558
• /
• 2000

LiMn2O4 thin fiolm cathodes for Li-ion secondary battery were fabricated by r.f. magnetron sputtering technique. As-deposited films were amorphous. A spinel structure could not be obtained LiMn2O4 films by in-situ thermal annealing. After post thermal annealing over $700^{\circ}C$ in oxygen atmosphere, LiMn2O4 films prepared above 100 W r.f. power could be crystallized into a spinel structure. The electrochemical property of the LiMn2O4 film cathodes was tested in a Li/1 M LiClO4 in PC/LiMn2O4 cell. From cyclic voltammetry at scan rate of 2mV/sec of 2.5~4.5V, LiMn2O4 electrode prepared by post annealing at 75$0^{\circ}C$ showed good initial capacity. LiMn2O4 electrode prepared by post annealing at 80$0^{\circ}C$ showed the best crycling performance.

• Polymer(Korea)
• /
• v.31 no.6
• /
• pp.497-504
• /
• 2007

We have prepared the dinuclear half-sandwich CGC(constrained geometry catalyst) with polymethylene bridge $[Zr(({\eta}^5\;:\;{\eta}^1-C_9H_5SiMe_2NCMe_3)Me_2)_2\;[(CH_2)_n]$ [n=6(4), 9(5), 12(6)] by treating 2 equivalents of MeLi with the corresponding dichlorides compounds. To study the catalytic behavior of the dinuclear catalysts we conducted copolymerization of ethylene and 1-hexene in the presence of three kinds of boron cocatalysts, $Ph_3C^+[B(C_6F_5)_4]^-\;(B_1),\;B(C_6F_5)_3\;(B_3)$, and $Ph_3C^+[(C_6F_5)_3B-C_6F_4-B(C_6F_5)_3]^{2-}\;(B_2)$. It turned out that all active species formed by the combination of three dinuclear CGCs with three cocatalyst were very efficient catalysts for the polymerization of olefins. The activities increase as the bridge length of the dinuclear CGCs increases. At the same time the dinuclear cocatalyst exhibited the lowest activity among three cocatalysts. The prime observation is that the dinuclear cocatalyst gave rise to the formation of the copolymers with the least branches on the polyethylene backbone.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.2
• /
• pp.73-77
• /
• 2012

Co-(0.8 wt%) and Ce-(0.4 wt%) doped cubic zirconia ($ZrO_2$ : $Y_2O_3$ = 80 : 20, 70 : 30, 60 : 40, 50 : 50 wt%) single crystals grown by a skull melting method were heat-treated in $N_2$ at $1000^{\circ}C$ for 5 hrs. The orange, yellowish brown and brown colored as-grown single crystals were changed into either brownish red, yellow and green color after the heat treatment. Before and after the heat treatment, the YSZ (yttria-stabilized zirconia) single crystals were cut for wafer form (${\phi}6.5mm{\times}t2mm$). The optical and structural properties were examined by UV-VIS spectrophotometer and X-ray diffraction. Absorption by $Ce^{3+}(^2F_{5/2,7/2}(4f){\rightarrow}^2T_g(5d^1))$, $Co^{2+}(^4A_2(^4F){\rightarrow}^4T_1(^4F)$ or $^4T_1(^4P))$ and $Co^{3+}$, change of ionization energy and lattice parameter were confirmed.

• Journal of the Korean Ceramic Society
• /
• v.38 no.11
• /
• pp.1046-1054
• /
• 2001

Effects of B$_2$O$_3$and CuO addition on the microwave dielectric properties of the PbWO$_4$-TiO$_2$ceramics were investigated in order to use this material as an LTCC material for fabrication of a multilayered RF passive components module. We found that PbWO$_4$could be used as an LTCC material because of its low sintering temperature (8$50^{\circ}C$) and fairy good microwave dielectric properties($\varepsilon$$_{r}$=21.5, Q$\times$f$_{0}$=37200 GHz and $\tau$$_{f}$ =-31 ppm/$^{\circ}C$). In order to stabilize $\tau$$_{f}$ of PbWO$_4$, TiO$_2$was added to the PbWO$_4$and the mixture was sintered at 8$50^{\circ}C$. A near zero $\tau$$_{f}$ value (+0.2 ppm/$^{\circ}C$) was obtained with 8.7 mol% TiO$_2$addition. $\varepsilon$r and Q$\times$f$_{0}$ values were 22.3 and 21400 GHz, respectively. It was believed that the decrement of Q$\times$f$_{0}$ value with TiO$_2$addition was resulted from increasing grain boundary. In order to improve Q$\times$f$_{0}$, various amounts of B$_2$O$_3$and CuO were added to the 0.913PbWO$_4$-0.087TiO$_2$mixture. The optimum amount of CuO was 0.05 wt%. At this addition, the 0.913PbWO$_4$-0.087TiO$_2$ceramic showed $\varepsilon$$_{r}$=23.5, $\tau$$_{f}$ =-2.2ppm/$^{\circ}C$, and Q$\times$f$_{0}$=32900 GHz after sintered at 8$50^{\circ}C$. In case of B$_2$O$_3$addition, the optimum amount range was 1.0~2.5 wt% at which we could obtain following results; $\varepsilon$$_{r}$=20.3~22.1, Q$\times$f$_{0}$=48700~54700 GHz, and $\tau$$_{f}$ =+2.4~+8.2ppm/$^{\circ}C$.

• Fashion & Textile Research Journal
• /
• v.13 no.5
• /
• pp.661-671
• /
• 2011

This study was designed to produce rounded belt pattern and tight-skirt pattern drafting method using 3D body scan data. Subjects were thirty women in their early twenties. In order to figure out the optimum cutting points, namely, where darts are made, using CAD program, curve ratio inflection points on the horizontal curve of waist, abdomen, and hip to find 1 point in the front, two points in the back part. The average length from center front point to maximum curve ratio was 7.7 cm(46.3%) on the waist curve; 7.9 cm(39.4%) on the abdomen curve. And the average length from center back point to maximum curve ratio point was 6.9 cm(39.0%) for first dart and 11.2 cm(63.3%) for second dart on the waist curve; 8.9 cm(35.8%) for first dart and 15.7 cm(63.3%) for second dart on the hip curve respectively. The cutting lines from were made up by connecting curve inflection points. After divided using cutting lines, each patch was flattened onto the plane and all the technical design factors related with patternmaking were measured, such as dart amount, lifting amount of side waist point, etc. Based on the results of correlation analysis among these factors, regression analysis was done to produce equations to estimate the variables necessary to draw up pattern draft method; F1=F8+1.1, $F4=2.5{\times}F2+0.9$, $F5=0.9{\times}F4+1.0$, $F6=0.3{\times}F4+0.4$, $B1=0.9{\times}B8+2.3$, $B4=2.1{\times}B2+1.3$, $B5=0.9{\times}B4+3.5$, and $B6=0.3{\times}B4+0.4$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.5
• /
• pp.470-474
• /
• 1998

Data on the first lactation performance traits of $F_1$, $F_2$ and $F_3$ crosses covering the period from 1972 to 1995 of a total of 803 dairy cows of three genetic grades maintained at Livestock Production Research Farm, Indian Veterinary Research Institute, Izatnagar were analysed. Three genetic grades were 1/2 Friesian + 1/2 Hariana (FH), 1/2 Friesian + 1/4 Brown Swiss and 1/4 Hariana (FBH) and 1/2 Friesian+ 1/4 Jersey + 1/4 Hariana (FJH). Age at first calving increased by 7% and 8% in $F_2$ and $F_3$, respectively, over the $F_1$ in FH. The reduction in age at first calving at $F_2$ and $F_3$ levels by 2-7% over the $F_1$ was observed in FBH and FJH. The lactation milk yield of $F_1$, $F_2$ and $F_3$ crosses was $1,943{\pm}100.3$, $2202{\pm}120.5$ and $1,925{\pm}123.2kg$ in FH; $2,014{\pm}76.7$, $2,264{\pm}91.5$ and $2,096{\pm}123.9kg$ in FBH and $2,005{\pm}87.0$, $2,414{\pm}94.4$ and $2,093{\pm}121.1kg$ in FJH, respectively. The lactation milk yield improved by 12-20% in $F_2$ crosses in various genetic grades. The performance of $F_1$ was, however, maintained in FH $F_3$ crosses, it improved by 4% in FBH and FJH $F_3$ crosses. The lactation lengths and calving intervals were nearly the same for $F_1$, $F_2$ and $F_3$ crosses in FH while lactation lengths and calving intervals were reduced by 3-11% in $F_2$ and $F_3$ crosses in FBH and FJH genetic grades. The milk yield/day of lactation length and milk yield/day of calving interval increased by 16-35% in $F_2$ and 2-14% in $F_3$ over the $F_1$ in various genetic grades. It is recommended that a sufficiently large effective population size of these three genetic grades be maintained by inter se matings and rigorous selection of sires so for developing a genetic base population for new breed development.