• Korean Journal of Crystallography
• /
• v.8 no.1
• /
• pp.48-58
• /
• 1997

[ $CuInTe_2$ ] synthesised in a horizontal electric furnace was found to be polycrystalline. Single crystals of $CuInTe_2$ were grown with the vertical Bridgman technique. The photoconductivity and photoluminescence of the crystals were measured in the temperature range 20 to 293 K. From the photocurrent peaks measured for the samples both perpendicular and parallel to c-axis, the energy band gaps of the samples were found to be 0.948 eV and 0.952 eV at room temperature respectively. The energy difference of the photocurrent and photoluminescence peaks of the samples both perpendicular and parallel to the c-axis measured at room temperature was a phonon energy, and its values were 22.12 meV and 21.4 meV respectively. The splitting of the valence band due to spin-orbit and crystal field interaction was calculated from the photocurrent spectra of the samples, The ${\Delta}cr\;and\;{\Delta}so$ are 0.046,0.014 eV respectively.

• Publications of The Korean Astronomical Society
• /
• v.21 no.2
• /
• pp.67-74
• /
• 2006

We have developed a control electronics system for an infrared detector array of KASINICS (KASI Near Infrared Camera System), which is a new ground-based instrument of the Korea Astronomy and Space science Institute (KASI). Equipped with a $512{\times}512$ InSb array (ALADDIN III Quadrant, manufactured by Raytheon) sensitive from 1 to $5{\mu}m$, KASINICS will be used at J, H, Ks, and L-bands. The controller consists of DSP(Digital Signal Processor), Bias, Clock, and Video boards which are installed on a single VME-bus backplane. TMS320C6713DSP, FPGA(Field Programmable Gate Array), and 384-MB SDRAM(Synchronous Dynamic Random Access Memory) are included in the DSP board. DSP board manages entire electronics system, generates digital clock patterns and communicates with a PC using USB 2.0 interface. The clock patterns are downloaded from a PC and stored on the FPGA. UART is used for the communication with peripherals. Video board has 4 channel ADC which converts video signal into 16-bit digital numbers. Two video boards are installed on the controller for ALADDIN array. The Bias board provides 16 dc bias voltages and the Clock board has 15 clock channels. We have also coded a DSP firmware and a test version of control software in C-language. The controller is flexible enough to operate a wide range of IR array and CCD. Operational tests of the controller have been successfully finished using a test ROIC (Read-Out Integrated Circuit).

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.97.2-97.2
• /
• 2012

The main payload of Science and Technology Satellite 3 (STSAT-3), Multipurpose InfraRed Imaging System (MIRIS) is the first Korean infrared space mission to explore the near-infrared sky with a small astronomical instrument developed by KASI. The 8-cm passively cooled telescope with a wide field of view (3.67 deg. ${\times}$ 3.67 deg.) will be operated in the wavelength range from 0.9 to $2{\mu}m$. It will carry out wide-band imaging and the Paschen-${\alpha}$ emission line survey. After the calibration of MIRIS in our laboratory, MIRIS has been delivered to SaTReC and successfully assembled into the STSAT-3. The main purposes of MIRIS are to perform the observation of Cosmic Infrared Background (CIB) at two wide spectral bands (I and H band) and to survey the Galactic plane at $1.88{\mu}m$ wavelength, the Paschen-${\alpha}$ emission line. CIB observation enables us to reveal the nature of degree-scale CIB fluctuation detected by the IRTS (Infrared Telescope in Space) mission and to measure the absolute CIB level. The MIRIS will continuously monitor the seasonal variation of the zodiacal light towards the both north and south ecliptic poles for the purpose of calibration as well as the effective removal of zodiacal light. The Pashen-${\alpha}$ emission line survey of Galactic plane helps us to understand the origin of Warm Ionized Medium (WIM) and to find the physical properties of interstellar turbulence related to star formation. Here, we also discuss the observation plan with MIRIS.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.1
• /
• pp.103-111
• /
• 2006

Statement of problem: The previous unilateral bite force recorder has several limitations for taking long time for measuring and causing discomfort to subjects. Because of these reasons, it could not use widely for epidemiological researches. However, 'Dental Prescale System' which is new equipment for measuring bite force, is more convenient for measuring bite force than previous unilateral recorder. Purpose: The purpose of this study was to compare a new technique(Dental Prescale System) using pressure sensitive foils for recording of maximal jaw closing force with conventional measurement using unilateral bite force recorder Material and method: This studies included 22 healthy dental students in college of dentistry Yonsei university in Rep of Korea. Mean age was 23.9 years. All subjects had continuous dental arches and no significant malocclusion or signs from the teeth and craniomandibular system. The Dental Prescale System (Fuji Film, Tokyo, Japan) consists of a horseshoe-shaped pressure sensitive sheet (50H, R type) and a computerized scanning system.(FPD705) We also used unilateral bite force recorder(Denbotics Co. Seoul, Rep.Korea) for comparing with Dental Prescale. Results and conclusion: The total bite force recorded with Dental Prescale System (1423 N) was systematically higher than that recorded by unilateral bite force recorder. (256 N) However, the maximum bite force values measured in the two ways were significantly correlated (r=0.46, p<0.05). The Dental Prescale bite force calculated for first molar (208 N) was lower than that recorded by unilateral bite force recorder. (256 N) The two values were also very significantly correlated. (r=0.66. p<0.001) There were significantly different in bite force between two measurement methods. The reasons were first, unilateral bite force recorder measured only the bite force of a part of teeth, and Dental Prescale measured the total teeth force. Second, in measurement, a difference in muscle contraction appeared by an extent of mouth-opening. Third, unilateral bite force recorder has the reducing effect of the bite force by protective tape. Fourth, Dental Prescale has limitations during the computer scanning procedure. Therefore, Dental Prescale System is considered to be a very promising alternative to be conventional bite force recording methods.

• Journal of the Korean Chemical Society
• /
• v.32 no.4
• /
• pp.342-350
• /
• 1988

An experimental investigation is made to determine the mechanism of the aquation of $[Co(en)_2Cl_2]^+$ in $Hg^{2+}$ aqueous solution. The progress of reaction is followed UV/vis-spectrophotometrically by a measurment of the absorbance at a specific wavelength of Co(III) complex as a function of time. The aquation of cis-$[Co(en)_2Cl_2]^+$ and trans-$[Co(en)_2Cl_2]^+$ has been found to be first order and second order with respect to the concentration of $Hg^{2+}$ catalyst, respectively. It has been found that the reaction rate for aquation of the trans-form is faster than that of cis-form, and that the product of either cis-form or trans-form is always in the mixture ratio of 97 % to 3 %. Plausible reaction mechanism is proposed for the reaction system on the basis of kinetic data and activation parameters. Theoretical rate equation derived from the proposed mechanism is consistent with the observed one.

• Clinical and Experimental Reproductive Medicine
• /
• v.22 no.2
• /
• pp.211-220
• /
• 1995

Though the endometriosis is not always related with infertility, endometriosis causes infertility in some patients. There are many treatment modalities of infertile patients who have endometriosis. In recent years, Assisted Reproductive Technology(ART) have been widely accepted as being a useful tool for the treatment of infertile endometriotic patients. The objective of this study was to evaluate the outcome of ART in infertile endometriotic patients who have been carried out IVF-ET from Jan, 1992 to Dec, 1994 and to compare the results between COH/IUI and IVF-ET in the patients with endometriosis stage I. Tubal disease only patients were grouped(308 patient, 956 cycles) as a control. Endometriosis group was subdivided into 4 groups according to American Fertility Society classification; endometriosis stage I (45 patients, 61 cycles), stage II (26 patients, 39 cycles), stage III (26 pateitns, 37 cycles), stage IV (33 patients, 50 cycles). The outcomes of IVF-ET in endometriosis patients were as follows; The oocyte recovery rates were significantly lower in stage III, IV endometriosis. In case of stage III endometriosis, the fertilization rate was significantly lower than other stages of endometriosis. Clinical pregnancy rates per cycle were not different between the tubal group(22%) and the endometriosis group(25%). According to endometriosis stage, the implantation rate and clinical pregnancy rate were significantly lower in stage IV (5.6%, 16%) compared with other stages (I; 10.0%, 26%, II;9.8%, 31%, III;12.6%, 32%). It suggests that some factor like autoantibodies may inhibit implantation of embryos in stage IV endometriosis. To evaluate the possibility that simply increasing the number of gametes at the site of fertilization might account for pregnancies attributed to IVF-ET, the authors retrospectively analyzed the outcome of couples undergoing IUI during hMG cycles and CC cycles between 1992 and 1994 in the women with endometriosis stage 1. In case of stage I endometriosis, though the COH/IUI group showed lower FSH level and lesser age profile than IVF-ET group, IUI group has resulted in lower pregnancy rates(19.2%) compared with the IVF-ET group(26.2%). In conclusion, endometriotic infertile patients can get comparable pregnancy rates with the tubal factor infertility patients during IVF-ET program. Moreover even in stage I endometriosis, IVF-ET may be an more effective treatment modality than COH/IUI.

• The Korean Journal of Mycology
• /
• v.48 no.3
• /
• pp.285-296
• /
• 2020

The goal of this study and potent whitening tyrosinase inhibitor-producing wild yeasts and further optimiz production of tyrosinase. Among non-pathogenic wild yeasts obtained from soils in Daejeon city and spice field of Geumsan in Chungcheongnam-do, Korea, we selected Saccharomyces cerevisiae(S. cerevisiae) WJSL0191 and Papiliotrema laurentii (P. laurentii) ON30 show 33.2% and 27.3% respectively. These selected strains formed and not pseudomycelium. S. cerevisiae WJSL0191 was sugar-tolerant as well as halophilic in 20% glucose-containing yeast (YPD) medium and 15% NaCl-containing YPD medium. S. cerevisiae WJSL0191 and P. laurentii ON30 showed 26.2% and 18.6% anti-wrinkle elastase inhibitory activities, respectively. aximal production of tyrosinase inhibitors obtained when S. cerevisiae WJSL0191 was cultured at 30 for 72h in YPD medium and P. laurentii ON30 was incubated at 20℃ for 24hr.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.33 no.3
• /
• pp.1-26
• /
• 2020

Objectives : This study was to examine the effects of 3 types of BTS which were excluded talcum only or replaced talcum to Lonicera japonicae Flos or Kochiae Fructus on the DNCB-induced atopic dermatitis in mice. Methods : In this study, Balb/c mice were divided into five groups: normal, control, GBT(BTS except talcum), GBTG(GBT added Lonicera japonicae Flos), and GBTJ(GBT added Kochiae Fructus). And the effects on atopic dermatitis were evaluated by weight change, ear's thickness and weight, thickness of dorsal skin, severity scale of dorsal skin, histopathologic findings of dorsal skin by H&E and toluidine blue stain, proliferation of splenocyte and thymocyte in vitro, proliferation of splenocyte in vivo, IL-4, TNF-α, IgE in serum. Results : There were no significantly changes in body weight and effect of ear's weight in GBT, GBTG, and GBTJ group. The thickness of ear of GBT and GBTJ group showed significant decrease. And the thickness of dorsal skin of GBTJ group significantly decreased compared to the control, GBT, and GBTG group. All the treated groups significantly decreased in severity scale, histopathologically reduced epidermal thickness, and mast cell infiltration. In vitro, all the treated groups increased in the proliferation rates of splenocyte. However, in vivo study, it showed a falling tendency and GBT group significantly decreased compared to control, GBTG, and GBTJ group. In vitro study, GBTG group significantly decreased in the proliferation rates of thymocyte. There was no IgE contents chnage in GBT, GBTG, and GBTJ groups but IL-4 and TNF-α contents were significantly decreased. Conclusions : GBT, GBTG, and GBTJ are expected to improve symptoms of atopic dermatitis and further studies are needed for development of BTS's transformation.

• Elastomers and Composites
• /
• v.47 no.4
• /
• pp.336-340
• /
• 2012

Residual stress in the injection molded part is originated from thermal shrinkage and shear stress during injection molding process. There are many measurement methods of residual stress in the plastic part. Residual stress in opaque products can be measured by chemical cracking test. This method enables the solvent and specimen to react and to cause cracks. Cracks developed according to the level of residual stress. Thus the stresses in plastic part can be quantitatively measured by counting the number of cracks or measuring the size of cracks. Relationship between stress and number of cracks in a plastic specimen has been investigated in this study. Bergen jig was used to give a strain in the specimens those were molded using PC/PBT and PC/ABS. Solvent for the chemical cracking test was prepared using tetrahydrofuran and methyl alcol with the ratio of 1 to 3. Stresses in the specimen can be calculated by strains those were imposed by Bergen jig. Cracks were developed for stress higher than certain level. The number of cracks increased by second order function for stress.

• Journal of Ginseng Research
• /
• v.29 no.3
• /
• pp.131-137
• /
• 2005

Acetaminophen(APAP) is one of the most extensively used analgesics and antipyreics worldwide. In order to investigate preventive effects of white and red ginseng extracts, male ICR mice pretreated with white or red ginseng extracts(50 or 250 mg/kg/day, for 5 days, orally) before treatment with acetaminophen(800mg/kg, i.p, single dose). In an attempt to elucidate the possible mechanism of hepatoprotective effect, superoxide dismutase(SOD), catalase(CAT), hydroperoxide, malondialdehyde(MDA) contents were studied. In pretreatment with red ginseng extract(250 mg/kg), the activities of SOD, CAT were generally highest and the hydrogen peroxide content was lowest. The levels of MDA were significantly lower in white and red ginseng extract groups than those in the APAP groups. By treatment with ginseng extract, high content of hydrogen peroxide and increased lipid peroxidatiion level caused by APAP could be lowered. Also, ginseng extracts were found to increase antioxidative enzyme activity. Finally, the results suggest that the antioxidant effects of (white and red) ginseng extracts prevent oxidative damage by direct antioxidant effects involving SOD, CAT and increasing the ability to synthesize endogenous antioxidants. It was concluded that ginseng can protect against APAP intoxication through its antioxidant properties.