• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.445.1-445.1
• /
• 2014

Dye-sensitized solar cells (DSSCs) have been widely investigated as a next-generation solar cell because of their simple structure and low manufacturing cost. The $TiO_2$ film with thickness of $8{\sim}10{\mu}m$, which consists of nanoparticles, acts as both a scaffold with a high surface-to-volume ratio for the dye loading and a pathway to remove the electrons. However, charge carriers have to move across many particle boundaries by a hopping mechanism. So, one dimensional nanostructures such as nanotubes, nanorods and nanowires should improve charge carrier transportation by providing a facile direct electron pathway and lowering the diffusion resistance. However, the efficiencies of DSSCs using one dimensional nanostructures are less than the $TiO_2$ nanoparticle-based DSSCs. In this work, the patterned $TiO_2$ film with thickness of $3{\mu}m$ was deposited using photolithography process to decrease of electron pathway and increase of surface area and transmittance of $TiO_2$ films. Properties of the patterned $TiO_2$ films were investigated by various analysis method such as X-ray diffraction, field emission scanning electron microscopy (FESEM) and UV-visible spectrophotometer.

• Journal of Surface Science and Engineering
• /
• v.52 no.5
• /
• pp.258-264
• /
• 2019

Assembling heterostructures by combining dissimilar oxide semiconductors is a promising approach to enhance charge separation and transfer in photoelectrochemical (PEC) water splitting. In this work, the CuO nanorods array/$Cu_2O$ thin film bilayered heterostructure was successfully fabricated by a facile method that involved a direct electrodeposition of the $Cu_2O$ thin film onto the vertically oriented CuO nanorods array to serve as the photoelectrode for the PEC water oxidation. The resulting copper-oxide-based heterostructure photoelectrode exhibited an enhanced PEC performance compared to common copper-oxide-based photoelectrodes, indicating good charge separation and transfer efficiency due to the band structure realignment at the interface. The photocurrent density and the optimal photocurrent conversion efficiency obtained on the CuO nanorods/$Cu_2O$ thin film heterostructure were $0.59mA/cm^2$ and 1.10% at 1.06 V vs. RHE, respectively. These results provide a promising route to fabricating earth-abundant copper-oxide-based photoelectrode for visible-light-driven hydrogen generation using a facile, low-cost, and scalable approach of combining electrodeposition and hydrothermal synthesis.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.1
• /
• pp.7-14
• /
• 2017

This study carried out a numerical analysis of the effects of hot waste water supply on the performance of a Type II absorption heat pump. There are two types of hot waste water supply, regular series flow and reverse series flow. Also it investigated the interaction between each type of flow and heat exchange solutions. As the effectiveness of heat exchange solutions increase, the steam generation and (COP) increase as well. If the effectiveness of a heat exchange solution is lower than 0.566, the steam generation rate of the reverse flow is lower than that of the regular series flow. A high effectiveness of heat exchange solution is therefore required to make a larger amount of steam in reverse series flow than with ordinary series flow. The COP difference between the two types of flow decreases with the increasing effectiveness of the heat exchange solution. Thus, a reverse flow type absorption heat pump can match the high steam generation rate and COP of the ordinary flow type when a highly effective heat exchange solution is applied.

• Journal of Photoscience
• /
• v.7 no.3
• /
• pp.87-95
• /
• 2000

As sunlight not always optimized for every terrestrial plant in terms of light quality, quantity and duration, some plants suffer detrimental effects of sunlight exposure under certain conditions. Photoinhibition of photosynthesis is a typical phenomenon representing harmful light effects, commonly observed in many photosynthetic organisms. It is generally accepted that functional, structural loss of photosystem II complex(PSII) is the primary event of photoinhibition. Accumulating data also suggest that singlet oxygen($^1$O$_2$) is the main toxic species directly involved in it. There are two different views on the specific site and mechanism of $^1$O$_2$ production in the photosynthetic membrane. One of them favors the PSII reaction center, where the primary charge pairs recombination occurs as a prerequisite for the generation of $^1$O$_2$, and the other inclines to photosensitized $^1$O$_2$ formation by a substance located outside PSII. This article describes how we, as the advocators of the latter concept, have arrived at the conclusion that $^1$O$_2$ immediately involved in PSII photodamage is largely generated from the Rieske center of the cytochrome b$_{6}$/f complex and diffuses into PSII, attacking the reaction center subunits.s.

• Journal of the Korean Ceramic Society
• /
• v.46 no.6
• /
• pp.561-567
• /
• 2009

The Fe-ACF/$TiO_2$ composites were prepared by a sol-gel method and were characterized by nitrogen adsorption, Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), and Energy Dispersive X-ray (EDX). The Fe-ACF/$TiO_2$ composites were developed for the decomposition of organic dyes by using a UV lamp. The decomposition effect was investigated under various conditions, such as three selected non-biodegradable organic dyes like Methylene Blue (MB), Methyl Orange (MO), Rhodamine B (Rh.B), and in the presence of Fe and hydrogen peroxide ($H_2O_2$). The photocatalytic activity was derived from possible combination effects, such as (1) adsorption of ACF, (2) generation of electron/hole by $TiO_2$, (3) photo-Fenton reaction of Fe, and (4) oxidation of $Fe^{2+}\;to\;Fe^{3+}\;by\;H_2O_2$.

• Korean Chemical Engineering Research
• /
• v.47 no.1
• /
• pp.11-16
• /
• 2009

Composite electrodes for redox supercapacitor were prepared potentiodynamically by the deposition of $RuO_2$ and the co-deposition of Ru-Co mixed oxide on the surface of single-walled carbon nanotube. Electrode of Ru-Co mixed oxide, in which Ru(13.13 wt%) and Co(2.89 wt%) were deposited on the carbon nanotube, exhibited a similar specific capacitance(${\sim}620\;F\;g^{-1}$) with $RuO_2$ electrode at a low potential scan rate($10\;mV\;s^{-1}$), but showed a superior one ($570\;F\;g^{-1}$) at a high scan rate($500\;mV\;s^{-1}$) than that of $RuO_2$($475\;F\;g^{-1}$). Such increase in the specific capacitance at high scan rate by the co-deposition of Ru and Co species was due to the structural support of Co species to provide the electronic conduction through Ru species.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.10
• /
• pp.1108-1113
• /
• 2005

Advanced oxidation process involving $O_3/H_2O_2$ was used to eliminate 1,4-dioxane and to enhance the biodegradability of dioxane-contaminated water. Oxidation process was carried out in a bubble column reactor under different pH and $H_2O_2$ concentrations. The removal efficiencies of 1,4-dioxane were investigated at hydrogen peroxide concentration between 40 and 120 mg/L. At the same pH, removal efficiencies of 1,4-dioxane increased with increasing initial $H_2O_2$ concentration. There was a linear relationship between initial concentration of $H_2O_2$ and the amount of consumed $O_3$. It was observed that the high $H_2O_2$ concentration accelerated the generation of hydroperoxy ions(${HO_2}^-$) and hydroxyl radicals($OH{\cdot}$). Hydrogen peroxide enhanced the decomposition of 1,4-dioxane and the biodegradability of the solution.

• Journal of Environmental Science International
• /
• v.18 no.1
• /
• pp.61-72
• /
• 2009

Fabrication and oxidants production of 3 or 4 components metal oxide electrode, which is known to be so effective to destruct non-biodegradable organics in wastewater, were studied. Five electrode materials (Ru as main component and Pt, Sn, Sb and Gd as minor components) were used for the 3 or 4 components electrode. The metal oxide electrode was prepared by coating the electrode material on the surface of the titanium mesh and then thermal oxidation at $500^{\circ}C$ for 1h. The removed RhB per 2 min and unit W of 3 components electrode was in the order: Ru:Sn:Sb=9:1:1 > Ru:Pt:Gd=5:5:1 > Ru:Sn=9:1 > Ru:Sn:Gd=9:1:1 > Ru:Sb:Gd=9:1:1. Although RhB decolorization of Ru:Sn:Sb:Gd electrode was the highest among the 4 components electrode, the RhB decolorization and oxidants formation of the Ru:Sn:Sb=9:1:1 electrode was higher than that of the 3 and 4 components electrode. Electrogenerated oxidants (free Cl and $ClO_2$) of chlorine type in 3 and 4 components electrode were higher than other oxidants such as $H_2O_2\;and\;O_3$. It was assumed that electrode with high RhB decolorization showed high oxidant generation and COD removal efficiency. OH radical which is electrogenerated by the direct electrolysis was not generated the entire 3 and 4 components electrode, therefore main mechanism of RhB degradation by metal oxide electrode based Ru was considered indirect electrolysis using electrogenerated oxidants.

• The Korean Journal of Pharmacology
• /
• v.21 no.1
• /
• pp.12-26
• /
• 1985

The generation of $O^{-}_{2}{\cdot}$ and its toxic effects were studied with rat brain mitochondria. The production of $O^{-}_{2}{\cdot}$ from mitochondria in the presence of succinate and antimycin was demonstrated by SOD-inhibitable reduction of NBT. Although succinate can support the $O^{-}_{2}{\cdot}$ formation, the highest rate needs antimycin indicating that blockade of electron flow in the respiratory chain augments the univalent reduction of molecular oxygen. Under this condition, $H_2O_2$ was also observed to be produced. But its formation appears to be derived from the dismutation of the primary product, $O^{-}_{2}{\cdot}$ since the rate of $H_2O_2$ production was markedly decreased by NBT and ferricytochrome c. The $O^{-}_{2}{\cdot}$ and $H_2O_2$ produced were able to cause toxic actions to mitochondrial and extra-mitochondrial components as shown by lipid peroxidation of mitochondrial membrane, and inactivation and lysis of isocitrate dehydrogenase and erythrocytes added to the medium, respectively. In all the toxic actions observed, $Fe^{++}$ was required. It appears that in the toxic actions $OH{\cdot}$ generated from the iron-catalyzed Haber-Weiss reaction acts as a mediator. This was supported by the finding that mitochondria in the presence of succinate and antimycin produced ethylene from methional, and $Fe^{++}$ added increased the ethylene production. The observed toxic actions of mitochondrial $O^{-}_{2}{\cdot}$ may provide evidence supporting a potential role of mitochondria as a source of oxygen radicals to cause tissue damage.

• Rapid Communication in Photoscience
• /
• v.3 no.4
• /
• pp.81-84
• /
• 2014

To examine the microenvironmental effect of DNA on the photosensitized reaction, the electron-donor-connecting porphyrin, meso-(9-phenanthryl)-tris(N-methyl-p-pyridinio) porphyrin (Phen-TMPyP), was synthesized. Phen-TMPyP can bind to oligonucleotides with two binding modes, depending on the DNA concentration. The fluorescence lifetime measurement of Phen-TMPyP shows a shorter component than that of the reference porphyrin without the phenanthryl moiety. However, the observed value is much longer than those of previously reported similar types of electron-donor-connecting porphyrins, suggesting that electron-transfer quenching by the phenanthryl moiety is not sufficient. The fluorescence quantum yield of Phen-TMPyP ($5{\mu}M$) decreased with an increase in DNA concentration of up to $5{\mu}M$ base pair (bp), possibly due to self-quenching through an aggregation along the DNA strand, increased with an increase in DNA concentration of more than $5{\mu}M$ bp and reached a plateau. The fluorescence quantum yield of Phen-TMPyP with a sufficient concentration of DNA was larger than that of the reference porphyrin. The singlet oxygen ($^1O_2$) generating activity of Phen-TMPyP was confirmed by the near-infrared emission spectrum measurement. The quantum yield of $^1O_2$ generation was decreased by a relatively small concentration of DNA, possibly due to the aggregation of Phen-TMPyP, and recovered with a sufficient concentration of DNA. The recovered quantum yield was rather smaller than that without DNA, indicating the quenching of $^1O_2$ by DNA. These results show that a DNA strand can stabilize the photoexcited state of a photosensitizer and, in a certain case, suppresses the $^1O_2$ generation.