• Title/Summary/Keyword: $^{14}C$ and $^{15}N$

Search Result 619, Processing Time 0.031 seconds

Analysis on the Present Condition of the Korean Stick-held Dip Net Fishery for Pacific Saury in the North Pacific Ocean (북태평양 한국 꽁치봉수망어엽의 현황 분석)

  • Jo, Hyun-Su;Moon, Dae-Yeon;Kim, Yeong-Seung;Lee, Ju-Hee;Kim, Hyung-Seok
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.40 no.2
    • /
    • pp.97-103
    • /
    • 2004
  • This paper presents a general overview of the Korean stick-held dip net fishery for Pacific saury operated in the North Pacific Ocean since 1985. Annual catches, annual centroids distribution of fishing ground, and optimum fishing temperatures were compared between the periods before and after the new Korea-Japan bilateral fishery arrangement established in 1998. Fishing usually began in May and ended by December, during which major catches were taken in the months September~November before the bilateral fishery arrangement between Korea and Japan, whereas in August~October after the arrangement. It was observed that after the arrangement the centroids of fishing ground was shifted from the usual fishing area off the east coast of Japan to the east of South Kuril Islands, 45$^{\circ}$N and 151$^{\circ}$E. Optimum fishing temperatures appeared to be different by month ; 12.5~14.4$^{\circ}C$ in May, 12.0~14.2$^{\circ}C$ in June, 11.4~13.9$^{\circ}C$ in July, 11.4~15.9$^{\circ}C$ in August, 12.9~16.9$^{\circ}C$ in September, 12.7~17.3$^{\circ}C$ in October, 13.1~17.6$^{\circ}C$ in November, and 15.0~19.1$^{\circ}C$ in December. A total of 13 species were caught during scientific observation periods but the target species, Pacific saury, accounted for about 99.9% of the total catch. Although there was no difference in fishing days between those vessels equipped with the sonar and those without sonar, number of set, total catch, and CPUE of those with sonar were higher than those without sonar by 13%, 26%, and 12%, respectively.

The Effect of Acyl Chain Structure on the Hydrolysis of Fatty Acids from Fish Oil by Lipase-OF 360,000 (아실체인 구조가 효소 Lipase-OF 360,000에 의한 지방산의 가수분해 특성에 미치는 영향)

  • 허병기;우동진;박경원
    • KSBB Journal
    • /
    • v.15 no.1
    • /
    • pp.72-75
    • /
    • 2000
  • The hydrolysis characteristics of each fatty acid composing the fish oil by means of the lipase from Candida cylindracea was investigated. The saturated fatty acids, C14:0, C16:0 and C18:0, and the unsaturated fatty acids with one double bond, C16:1, C18:1(n-7), C18:(n-9), C20:1 and C22:1 were more easily hydrolyzed than the $\omega$-3 polyunsaturated fatty acids. when the number of carbon of the $\omega$-3 fatty acids was same but that of double bond was different, the hydrolysis of the $\omega$-3 fatty acids having lower number of double bond was more rapidly carried out. When the degree of polyunsaturation was same but the number of carbon was different, the lipase acted more rapidly upon the $\omega$-3 fatty acids with lower number of carbon. Docosahexaenoic acid(DHA) was most highly concentrated in the glyceride mixture after 120hr hydrolysis among the various $\omega$-3 polyunsaturated fatty acids. The weight percentage of DHA to the $\omega$-3 fatty acids in the fish oil was 31.87% but that in the glyceride mixture after 120hr hydrolysis was 51.89%.

  • PDF

Hardness of Constituent Phases in Ti(C0.7N0.3)-WC-Ni Cermets Measured by Nanoindentation (나노인덴테이션으로 측정한 Ti(C0.7N0.3)-WC-Ni 써멧 구성상의 경도)

  • Kim, Seong-Won;Kim, Dae-Min;Kang, Shin-Hoo;Kim, Hyeong-Jun;Kim, Hyung-Tae
    • Journal of the Korean Ceramic Society
    • /
    • v.46 no.1
    • /
    • pp.116-121
    • /
    • 2009
  • The constituent phases in Ti($C_{0.7}N_{0.3}$)-xWC-20Ni (wt%, x=5, 15, 25) cermets were characterized using nanoindentation in conjunction with observation of microstructure. The microstructure of cermet is composed of hard phase and binder phase, which gave rise to a wide range of hardness distribution when nanoindentation was carried out on the polished surface of cermets. Because of the inhomogeneous nature of cermet microstructure, observation of indented surface was indispensable in order to separate the hardness of each constituent phase. The measured values of hardness using nanoindentation were ${\sim}14\;GPa$ for the binder phase and ${\sim}24$ to 28 GPa for the hard phase, of which nanoindentation hardness was decreased with the addition of WC into Ti($C_{0.7}N_{0.3}$)-Ni system. In addition, the nanoindentation hardness of Ni binder phase was much higher than reported Vickers hardness, which could result from confined deformation of binder phase due to the surrounding hard phase particles.

Effects of Weed Control on Pseudocercospora vitis and Fruit Characteristics in Campbell Early Vineyard (캠벨얼리 포도원에서 잡초관리 방법이 갈색무늬병 및 과실특성에 미치는 영향)

  • Kim, Sun-Kook;Choi, Won-Ho;Lee, Seok-Ho;Lee, Yun-Sang;Yoon, Changmann;Hong, Seong-Tac
    • Korean Journal of Organic Agriculture
    • /
    • v.23 no.4
    • /
    • pp.897-909
    • /
    • 2015
  • This study was conducted to evaluate the effect of weed control on disease incidence, plant growth and fruit quality, and to provide effective method to farmers at the vineyard. At the raincoat greenhouse cultivating 'Campbell Early', several weed controlling methods were compared to the control. Mean temperature of plots between soil covering (C.B., W.F., S.N., P.F. and R.H.) and non soil covering (M.W.2, M.W.3 and U.T.) were similar with $26.2^{\circ}C$ (July) and $25.8^{\circ}C$ (Aug.), but humidity of soil covering was sharply decreased in late-July under 40%. Soil water were all higher in soil covering plots than that of non-soil covering, however, soil temperature was recorded lower in soil covering plots. Disease incidence of Peudocercospora vitis according to soil coverings had effect on black plastic film mulching by decreasing grapevine leaf spot to 85% in July, 69% in August, compared to the control, with showing the smallest lesion incidence in FMB. Among growth characters, internode length and internode width of black plastic film mulching was higher than that of the control. SPAD value of black plastic film mulching was recorded the highest. It was not significant among the treatments, but brix was recorded highly in black plastic film mulching with $14{\sim}15^{\circ}Brix$.

Degradation Characteristics of Paper Sludge and Changes of Heavy Metals in Soil (토양중 제지슬러지의 분해 특성 및 중금속 변화)

  • Lee, Hong-Jae;Jeong, In-Ho;Cho, Ju-Sik;Heo, Jong-Soo
    • Korean Journal of Environmental Agriculture
    • /
    • v.15 no.3
    • /
    • pp.296-305
    • /
    • 1996
  • Chemical characteristics of paper sludge, degradation of the sludge in soil and $CO_2$ generation, and changes of nitrogen and heavy metals in soil treated with the sludge were investigated. The results obtained was summarized as follows: 1. Degradation rate of paper sludge in soil was 19% at room temperature, and 28% at $incubation(30^{\circ}C)$ temperature after 12-weeks treatment. 2. T-C, T-N and the C/N ratio of the sludge in soil at room temperature were 15.5%, 0.22% and 71 respectively, and 14.5%, 0.24% and 60, respectively, at $incubation(30^{\circ}C)$ temperature after 12-week treatment. 3. $CO_2$ genaration in soil treated with 1%, 3% and 5% of the sludge was 247mg/100g, 334mg/100g and 458mg/100g, respectively, at room temperature, and 385mg/100g, 550mg/100g and 618mg/100g, respectively, at incubation temperature after 12 weeks treatment. 4. Mineralization ratio of organic nitrogen in soil treated with 1%, 3% and 5% of the sludge was 8.7%, 13.4% and 16.2%, respectively, at $incubation(30^{\circ}C)$ temperature after 12-weeks treatment. 5. The amounts of DTPA-extractable Cu, Cd, Zn, Pb, and Cr in Soil treated with paper sludge were $0.7{\sim}2.2$, $0.1{\sim}0.17$, $1.4{\sim}2.8$, $1.4{\sim}2.8$, and $0{\sim}0.7mg/kg$, respectively. Mean while, those of $HNO_3$ extractable Cu, Cd, Zn, Pb, and Cr were $7.9{\sim}10.0$, $0.6{\sim}0.9$, $17.6{\sim}34.4$, $14.7{\sim}18.5$, and $5.8{\sim}9.0mg/kg$, respectively.

  • PDF

Studies on Preparation of a Cheese-like product from Soybean Milk (콩을 이용한 치-즈제조에 관한 연구)

  • Kim, Chang-Sik;Shin, Hyo-Sun
    • Korean Journal of Food Science and Technology
    • /
    • v.3 no.1
    • /
    • pp.57-63
    • /
    • 1971
  • 1) Among five lactic acid bacteria examined, Str. thermophilus and Str. diacetilactis produced remarkably greater amount of acids in soybean milk than Str. lactis, Str. cremoris and L. bulgaricus. 2) Soybean milk and skimmed dry milk were combined in the ratio of 7 : 3 and were carried out in lactic acid fermentation for 24 hours at optimum temperature. The result indicated that the yield of precipitation and protein content of it were the most, the moisture content was the least and curd structure formed was considered too hard. 3) Based on these and other results, following procedure was used for manufacturing: soybean milk and skimmed dry milk were combined in the ratio of 7 : 3, heated at $121^{\circ}C$ for 20 min., cooled, added Str. thermophilus as lactic acid starter and incubated for 24 hours and $37{\pm}1^{\circ}C$. The curd was cooked, hooped, and pressed for 24 hours, to the surface of which, Penicillium caseicolum and sodium chloride were spread. During ripening of the curd at $15^{\circ}C$ and $85{\sim}90%$ RH for 21 days, Pen. caseicolum was highly developed after 7 days, pH was increased and proteolytie activity has reached to the peak point after 14 days. After 7 days of ripening total water soluble nitrogen, water soluble protein nitrogen and amino acids nitrogen were begun to increase. After 21 days of ripening total water soluble nitrogen, water soluble protein nitrogen and amino-N reached to 52%, 32% and 14% of total nitogen. In the soybean cheese, after 21 days of ripening, 17 or more kinds of amino acids were detected by two-dimentional paper chromatography. The product contained 63.2% of moisture, 17.5% of crude protein, 13.2% of crude fat, 2.8% of crude ash and 2.5% of sodium chloride.

  • PDF

Improvement of Fungal Cellulase Production by Mutation and Optimization of Solid State Fermentation

  • Vu, Van Hanh;Pham, Tuan Anh;Kim, Keun
    • Mycobiology
    • /
    • v.39 no.1
    • /
    • pp.20-25
    • /
    • 2011
  • Spores of Aspergillus sp. SU14 were treated repeatedly and sequentially with $Co^{60}$ ${\gamma}$-rays, ultraviolet irradiation, and N-methyl-N'-nitro-N-nitrosoguanidine. One selected mutant strain, Aspergillus sp. SU14-M15, produced cellulase in a yield 2.2-fold exceeding that of the wild type. Optimal conditions for the production of cellulase by the mutant fungal strain using solid-state fermentation were examined. The medium consisted of wheat-bran supplemented with 1% (w/w) urea or $NH_4Cl$, 1% (w/w) rice starch, 2.5 mM $MgCl_2$, and 0.05% (v/w) Tween 80. Optimal moisture content and initial pH was 50% (v/w) and 3.5, respectively, and optimal aeration area was 3/100 (inoculated wheat bran/container). The medium was inoculated with 25% 48 hr seeding culture and fermented at $35^{\circ}C$ for 3 days. The resulting cellulase yield was 8.5-fold more than that of the wild type strain grown on the basal wheat bran medium.

Environmental Change of High Moor in Mt. Dae-Am of Korean Peninsula (대암산 고층습원의 환경변천)

  • Yoshioka, Takahito;Kang, Sang-Joon
    • Korean Journal of Ecology and Environment
    • /
    • v.38 no.1 s.110
    • /
    • pp.45-53
    • /
    • 2005
  • The environmental change of Yong-nup in Mt. Dae-Am, which is located at the northern part of Kangwon-Do, Korea, was assesed with peat sedimentary carbon and nitrogen isotope analysis. The surface layer of the peat (0 ${\sim}$ 5 cm) was 190 year BP, and the middle layers (30 ${\sim}$ 35 cm and 50 ${\sim}$ 55 cm) were 870 year BP and 1900 year BP, respectively. Bulk sedimentation rate was estimated to be about 0.4 mm $year^{-1}$ for 0 cm to 30 cm and 0.15 mm $year^{-1}$ for 35 cm to 50 cm. The $^{14}C$ age of the bottom sediment (75 ${\sim}$ 80 cm) collected and measured in this study was about 1900 year BP, although it was measured that the $^{14}C$ of the lowest bottom sediment in Yong-nup was 4105 ${\pm}$ 175 year BP (GX-23200). Since the $^{14}C$ ages for 50 ${\sim}$ 55 cm and 75 ${\sim}$ 80 cm layers were almost the same as 1890 ${\pm}$ 80 fear BP (NUTA 5364) and 1850 ${\pm}$ 90 year BP (NUTA 5462), respectively, we have estimated that the deep layers (55 ${\sim}$ 80 cm) in the high moor were the original forest soil. The low organic C and N contents in the deeper layers supported the inference. The sediment of 50 ${\sim}$ 55 cm layer contains much sandy material and showed very low organic content, suggesting the erosion (flooding) from the surrounding area. In this context, the Yong-nup, high moor, of Mt. Dae-Am, might have developed to the sampling site at about 1900 year BP. The ${\delta}^{13}C$ values of organic carbon and the ${\delta}^{15}N$ values of total nitrogen in the peat sediments fluctuated with the depths. The profile of ${\delta}^{13}C$ may indicate that the Yong-nup of Mt. Dae-Am have experienced the dry-wet and cool-warm period cycles during the development of the high moor. The ${\delta}^{15}N$ may indicate that the nitrogen cycling in the Yong-nup have changed from the closed (regeneration depending) system to the open (rain $NO_3\;^-$ and $N_2$ fixation depending) system during the development of the high moor.

Fine localization of a new cataract locus, Kec, on mouse chromosome 14 and exclusion of candidate genes as the gene that causes cataract in the Kec mouse

  • Kang, Min-Ji;Cho, Jae-Woo;Kim, Jeong-Ki;Kim, Eun-Min;Kim, Jae-Young;Cho, Kyu-Hyuk;Song, Chang-Woo;KimYoon, Sun-Joo
    • BMB Reports
    • /
    • v.41 no.9
    • /
    • pp.651-656
    • /
    • 2008
  • A mouse with cataract, Kec, was generated from N-ethyl-N-nitrosourea (ENU) mutagenesis. Cataract in the Kec mouse was observable at about 5 weeks after birth and this gradually progressed to become completely opaque by 12 weeks. Dissection microscopy revealed that vacuoles with a radial or irregular shape were located primarily in the cortex of the posterior and equatorial regions of the lens. At the late stage, the lens structure was distorted, but not ruptured. This cataract phenotype was inherited in an autosomal recessive manner. We performed a genetic linkage analysis using 133 mutant and 67 normal mice produced by mating Kec mutant (BALB/c) and F1 (C57BL/6 $\times$ Kec) mice. The Kec locus was mapped to the 3 cM region encompassed by D14Mit34 and D14Mit69. In addition we excluded coding sequences of 9 genes including Rcbtb2, P2ry5, Itm2b, Med4, Nudt15, Esd, Lcp1, Slc25a30, and 2810032E02Rik as the candidate gene that causes cataract in the Kec mouse.

The Point Load Index of the Daegu Shale and its Relation to the Uniaxial Compressive Strength (대구지역 셰일의 점재하지수 특성 및 일축압축강도와의 상관성)

  • Lee, Younghuy;Youn, Chanho
    • Journal of the Korean GEO-environmental Society
    • /
    • v.10 no.3
    • /
    • pp.37-45
    • /
    • 2009
  • The experimental study was carried out to evaluate the characteristics of the point load index and the uniaxial compressive strength of inherently anisotropic shale in the laboratory. In the testing program the effects of size and the shape on the point load index were investigated both in the axial and diametral direction. In general, the point load index of the shale was constant when the length/diameter (L/D) ratio of the specimen is greater than 1.0 in the diametral direction. The point load index in axial direction shows slight decrease as the L/D ratio is increased and the corner breakage was observed when L/D ratio is greater than unity. The minimum point load index was observed in the bedding angle of $\beta=15^{\circ}{\sim}30^{\circ}$ in the axial point load tests and of $\beta=30^{\circ}$ in the uniaxial compression tests. The relationship between the point load index and the uniaxial compressive strength was linear to ${\sigma}_c=25.0 I_{s(50)}$ for the specimen with the bedding plane angle, $\beta$ at the range of $0^{\circ}{\sim}90^{\circ}$. On the other hand, this relationship was appeared linear to ${\sigma}_c=14.4 I_{s(50)}$ when the bedding angle, $\beta$ is fixed to 90${^{\circ}}$ and this correlation is much different from ${\sigma}c=22 I_{s(50)}, which is generally applied to the rock specimen with no bedding plane in ISRM (1985). The anisotropic strength with different $\beta$ angle shows the shoulder type and this can be suitably modelled by the corrected Ramamurthy'(1993)s equation with the index value of 'n' equal to 3.0.

  • PDF