• Journal of the Korean Magnetic Resonance Society
• /
• v.26 no.4
• /
• pp.51-58
• /
• 2022

The baseline flattened NMR spectrum has been achieved by several methodologies including pulse manipulation with a series of phase cycling. The background signal inherent in the probe is also main source of baseline distortion both in solution and solid NMR. The simple direct polarization with 90° pulse flipping the magnetization from the z-axis onto the receiver coil requires the strong rf pulse enough to encompass the wide frequency range to excite the resonance of interest nuclei. Albeit the perfect polarization 90° pulse, the signal from the unwanted magnetic fields such as background signal can not be completely suppressed by suitable phase cycling. Moreover, slowly baseline wiggling signal from the low 𝛾 nuclei is not easy to eliminate with multiple pulse manipulation. So there is still need to contrive the new scheme for that purpose in an adroit manner. In this article new triple pulse excitation schemes for TIP and modified DEPTH pulse sequence are analytically examined in terms of arbitrary phase and flip angle of pulse. The suitable phase cycling for these pulse trains is necessary for the good sensitivity and resolution of the spectrum. It is observed that the ¹³C sensitivity TIP experiment is almost equal to the CP/MAS with modified DEPTH sequence, both of which are applicable to both solid and solution state NMR.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.7
• /
• pp.2009-2012
• /
• 2014

An anionic surfactant, sodium dodecylbenzene sulfonate (SDBS), was introduced during the ultrasonication process for exfoliation of graphene. The surfactant plays the roles of exfoliator and stabilizer by binding to the graphene surface. The obtained modified graphene was characterized by Fourier-transform infrared spectroscopy (FT-IR) and solid state $^{13}C$ CP/MAS NMR to analyze the binding between molecules, and by X-ray diffraction (XRD) to characterize the bulk structure. The resulting graphene exhibited good dispersion stability in both water and organic solvents.

• Polymer(Korea)
• /
• v.37 no.3
• /
• pp.308-315
• /
• 2013

In this study, we performed surface modification of silica nanoparticles with bis[3-(triethoxysilylpropyl)]tetrasulfide (TESPT) silane coupling agent to study the effects of treatment temperature, treatment time, and amount of TESPT used on the silanization degree with Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), elemental analysis (EA) and solid state $^{13}C$ and $^{29}Si$ cross-polarization magic angle spinning (CP/MAS) nuclear magnetic resonance spectroscopy (NMR). We found peak area of isolated silanol groups at $3747cm^{-1}$ decreased, but peak area of $-CH_2$ asymmetric stretching of TESPT at $2938cm^{-1}$ increased with the amount of TESPT from FTIR measurements. We also used universal testing machine (UTM) to study mechanical properties of styrene butadiene rubber (SBR) nanocomposites with 20 phr (parts per hundred of rubber) of pristine and TESPT modified silicas, respectively. The tensile strength and 100% modulus of modified silica/SBR nanocomposite were enhanced from 5.65 to 9.38MPa, from 1.62 to 2.73 MPa, respectively, compared to those of pristine silica/SBR nanocomposite.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.822-830
• /
• 2012

We used dipodal type bis[3-(trimethoxysilyl)propyl]amine (BTMA) silane coupling agent to modify silica nanoparticles to introduce secondary amino groups on the silica surface. These N-H groups were reacted with three different molecular weights (M.W. = 258, 575, and 700) of poly(ethylene glycol) diacrylates to introduce different attached layer thicknesses on the silica surface by Michael addition reaction. After Michael addition reaction, we used several analytical techniques such as fourier transform infrared spectroscopy (FTIR), elemental analysis (EA) and solid state $^{13}C$ cross-polarization magic angle spinning (CP/MAS) nuclear magnetic resonance spectroscopy to characterize introduced structures. We found almost complete Michael addition reaction of both two acrylate groups of PDGDA with N-H groups of BTMA modified silica to form ${\beta}$-amino acid esters. Between equimolar ratio of pure BTMA and pure PEGDA reaction, only one acrylate group of two acrylate groups of PEGDA reacted with N-H groups of pure BTMA to form ${\beta}$-amino acid ester and the other remaining acrylate group can be used to form a polymer later.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.3
• /
• pp.166-170
• /
• 2004

Gluconobacter oxydans that produces the cellulose was isolated. In order to confirm the chemical features of cellulose, various spectrophtometeric analysis were carried out using electron microscopy, X-ray diffractogram, and CP/MAS $\^$13/C NMR. The purified cellulose was found to be identical to that of Acetobacter xylinum. For effective production of cellulose, the various carbon and nitrogen sources, mixture of calcium and magnesium ions, and biotin concentration were investigated in flask cultures. Among the various carbon sources, glucose and sucrose were found to be best for the production of cellulose, with maximum concentration of 2.41 g/L obtained when a mixture of 10 g/L of each glucose and sucrose were used. With regard to the nitrogen sources, when 20 g/L of yeast extract was used, the maximum concentration of bacterial cellulose was reached. The concentration of cellulose was increased with mixture of 2 mM of each Ca$\^$2+/ and Mg$\^$2+/. The optimum biotin concentration for the production of cellulose was in the range of 15 to 20mg/L. At higher biotin concentration (25-35mg/L). the bacterial cellulose production was lower.