• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.6
• /
• pp.496-501
• /
• 2007

In order to enhance sintering characteristics on the $ZnO-Pr_6O_{11}$ based multilayer chip varistors (MLVs), a response surface analysis using central composite design method were carried out. As a result, varistor voltage($V_{1mA}$), nonlinear coefficient ($\alpha$), leakage current ($I_L$) and capacitance (C) were considered to be mainly affected by sintered temperature and holding time. MLVs sintered at $1200^{\circ}C$ and above $1200^{\circ}C$ revealed poor electrical characteristics, possibly due to the reaction between electrode materials(Pd) and $ZnO-Pr_6O_{11}$ based ceramics. On the sintering temperature range $1150{\sim}1175^{\circ}C$, nonlinear coefficient ($\alpha$) and leakage current ($I_L$) were shown to be $60{\sim}69$ and below $0.3{\mu}A$, respectively. In particular, MLVs sintered at $1175^{\circ}C$, 1.5 hr and $2^{\circ}C/hr$ (cooling speed) showed stable ESD(Electrical Static Discharge) characteristics under the condition of 10 times at 8 Kv with deviation varistor voltage, and deviation nonlinear coefficient were 0.3% and 0.33% (at positive), 0.55% (at negative), respectively.

• Clinical and Experimental Reproductive Medicine
• /
• v.28 no.2
• /
• pp.111-120
• /
• 2001

Objective: To verify the expression of leptin receptor (OB-R) in oocytes and preimplantation embryos, the involvement of mitogen activated protein kinase (MAPK or Erk1/2) in the leptin signaling, and effect of leptin on the oocyte maturation in mice. Method: RT-PCR analysis of OB-R was conducted in germinal vesicle (GV)-intact and MII stage oocytes, and 1, 2, 8-cell embryos and blastocysts. Germinal vesicle breakdown (GVB), polar body extrusion, monitored in the presence or absence of leptin ($1{\mu}M$). Following the leptin treatment, temporal changes in MAPK activity were verified by immunoprecipitation and in vitro kinase assay in MII oocytes. Results: The expression of OB-R mRNA was found in GV and MII oocyte but not in the embryos. MAPK activity of the MII oocytes was significantly increased by brief incubation in the HTF supplemented with leptin ($1{\mu}M$). Priming of PD098059, a MEK inhibitor to leptin treatment attenuated the activation of MAPK by leptin in MII oocytes. Following 24 hrs of culture of the GV oocytes, leptin significant increased the GVB and 1 st polar body extrusion. Conclusion: This result suggested that functional interaction between leptin and OB-R resulted in potentiation of MAPK (Erk1/2) activity in MII oocytes through MEK activation and that leptin might be a local regulator of meiotic maturation of the mouse oocytes.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.3
• /
• pp.1965-1967
• /
• 2013

Background: To obtain the maximum additional information about the prognosis of gastric cancer, we compared CA-50 with other previously defined markers. Materials and Methods: This hospital based study was carried out in the Department of Biochemistry of Nepalese Army Institute of Health Sciences between $1^{st}$ July 2012 and $31^{st}$ December 2012. The variables collected were age, gender, AFP, CEA, CA19-9, and CA50, assayed with ELISA reader for all cases. The cut off values for serum AFP, CEA, CA19-9, and CA-50 were 10 ${\mu}g/l$, 10 ${\mu}g/l$, 37 U/ml, and 20 U/ml, respectively according to the manufacturer's instructions. Approval for the study was obtained from the institutional research ethical committee. Results: Of the 40 examined patients, 13 patients had tumors located in the upper third of the stomach, 6 patients had tumors in the middle third, 16 patients had tumors in the lower third, and 5 patients had tumors occupying two-thirds of the stomach or more. The distribution of lymph node staging of the patients was as follows: 7 patients belonged to N0, 9 patients to N1 stage, 10 patients to N2 stage, and 14 patients to N3 stage. The statistical method of Cox proportional hazards using multivariate analysis also illustrated that tumor markers including CEA (2.802), CA19-9 (2.690), CA50 (2.101), were independent prognostic factors, as tumor size (1.603), and lymph node stage (1.614). Conclusions: The tumour markers now available, like CEA, CA 19-9 and CA 50, chiefly perceive advanced gastric cancer. The preoperative rise in those tumour marker level have a prognostic significance and may be clinically helpful in choosing patients for adjuvant management.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1246-1247
• /
• 2008

With recent advanced in portable electric devices, wireless sensor, MEMS and bio-Mechanics device, the new typed power supply, not conventional battery but self-powered energy source is needed. Particularly, the system that harvests from their environments are interests for use in self powered devices. For very low powered devices, environmental energy may be enough to use power source. Therefore, in other to made piezoelectric energy harvesting device, PMN-PZT thick film was formed by the screen printing method on the Ag/Pd coated alumina substrate. The layer was 8 layers and slurry where a-terpineol, ethycellulose, ferro B-75001 as Vehicle, PMN-PZT powder used are fabricated by ball mill. The output power quality was be also investigated by changing the load resistance, weight and frequency. The made piezoelectric energy harvesting device was resulted from the conditions of 33$k{\Omega}$, 0.25g, 197Hz respectively. The thick film was prepared at the condition of 2.75Vrms, and its power was 230${\mu} W$ and its thickness was 56${mu}m$. The piezoelectric energy harvesting device output voltage was increased, when the load weight, load resistance was increasing and resonance frequency was diminishing. The other side, resonance frequency was diminished, when the weight was increasing. And output power was continuously it changed by load resistance, output voltage, weight and resonance frequency.

• The Korean Journal of Pesticide Science
• /
• v.7 no.3
• /
• pp.159-168
• /
• 2003

With microtiter plate, the assay method was developed for detecting the fungicidal activity of new compounds against spore germination, spore adhesion and mycelial growth of Colletotrichum sp. JC24 cal1Sing red pepper anthracnose. Also, the effects of some commercialized fungicides on fungal development like above mentioned were investigated by measuring the optical density of mycelia grown into wells of microtiter plate. For the standardization of assay method, some factors, such as the treatment of MTT and/or propanol, inodulum density and incubation period, affecting on mycelial optical density were investigated. For obtaining precise and consistent mycelial optical density, it was necessary the treatment of MTT for 12 hrs and propanol for 1 hr. inoculum density adjusted to $1\times10^5$ spores/mL and incubation period for 36 hrs at $25^{\circ}C$. For fungicidal activities, 6 protective fungicides, 6 ones inhibiting sterol biosynthesis, and one inhibiting respiration were used in this study. While mancozeb, chlorothalonil and dithianon among 6 protective fungicides inhibited strongly spore germination, adhesion, and mycelial growth at $6.25{\mu}g/mL$, propineb, iminoctadine and fluazinam inhibited intermediately spore germination and mycelial growth at $100{\mu}g/mL$. Washing above 3 fungicides with new PD broth, their activity against spore adhesion decreased. With hexaconazole, tebuconazole and myclobutanil, the tendency of the activity against fungal differentiation of the early infection stage was similar to the latter group of protective fungicides, showing the decrease of the inhibitory activity against spore adhesion by washing 2 hrs after incubation. However, kresoxim-methyl inhibited spore adhesion distinctly, depending on the applied concentrations. Based on these results, it might be able to assess the fungicidal activity of many compounds against spore germination, adhesion and mycelial growth by the use of microtiter plate in vitro. Using the assay developed in this report, it was possible to investigate the inhibitory activity of some commercialized fungicides, too.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.3
• /
• pp.7-13
• /
• 2007

In the optical module for optical communications, the flip chip bonding is used fer the precise alignment of the optical fiber and optical device. In flip chip bonding, the optical device is aligned and welded while observing the alignment mark of substrate and chip by using flip chip bonder in order to bond the optical device at the exact position. In this research, optical passive alignment method of photodiode(PD) flip chip bonding is suggested for low cost optical subassembly. By using the visible He-Ne laser (633nm wavelength), photodiode is easily aligned with emitting spot on the optical fiber with the help of stereoscopic alignment system. We compensated wavelength dependent deviation about 4m to find out real alignment position of 1550nm input laser by ray tracing. The maximum optical coupling efficiency between the optical fiber and photodiode was about 23.3%.

• Journal of the Korean Chemical Society
• /
• v.37 no.6
• /
• pp.599-603
• /
• 1993

Crystal structure of bis(1,2-diaminopropane)palladium(II) bis(oxalato)palladate(II) has been determined by X-ray crystallography. Crystal data: $Pd_2C_{10}H_{10}N_{4}O_{8}$, $M_W$ = 573.09, orthorhombic, space group $P_{ccn}$ (No = 56), a = 16.178(5), b = 16.381(6), c = 6.685(2)$\{AA}$, V = 1771.6 $\{AA}^3$, $M_W$W = 573.09, $D_c$ = 2.014 g${\cdot}c\;m^{-3}$, Z = 4, T = 294K, F(000) = 1056.0 and $\mu$ = 20.466 c$m^{-1}$. The intensity data were collected with $Mo-K\alpha$ radiation (${\lambda}$ = 0.7107 $\AA)$ on an automatic four-circle diffractometer with a graphite monochromater. The structure was solved by Patterson method and refined by full matrix least-squares methods using Pivot weights. The final R and S values were R = 0.065, $R_W = 0.059, R_{all}$ = 0.065 and S = 4.315 for 605 observed reflections. Both cation and anion complexes are essentially planar and have dihedral angle of $18(l)^{\circ}$ between thier planes. In the crystal structure, they do not have the Magnus's salt type mixed stacks; instead, the complex anions form regular stacks along the c-axis with the M-M bond length of $3.343(5)\AA$ and their stacks are surrounded by the complex cations through hydrogen bonds with the nitrogen-oxygen distances of 2.94(3) and $3.31(4)\AA.$

• The Korean Journal of Physiology and Pharmacology
• /
• v.19 no.2
• /
• pp.99-104
• /
• 2015

The aim of this study is to develop a physiologically based pharmacokinetic (PBPK) model in intra-abdominal infected rats, and extrapolate it to human to predict moxifloxacin pharmacokinetics profiles in various tissues in intra-abdominal infected human. 12 male rats with intra- abdominal infections, induced by Escherichia coli, received a single dose of 40 mg/kg body weight of moxifloxacin. Blood plasma was collected at 5, 10, 20, 30, 60, 120, 240, 480, 1440 min after drug injection. A PBPK model was developed in rats and extrapolated to human using GastroPlus software. The predictions were assessed by comparing predictions and observations. In the plasma concentration versus time profile of moxifloxcinin rats, $C_{max}$ was $11.151{\mu}g/mL$ at 5 min after the intravenous injection and $t_{1/2}$ was 2.936 h. Plasma concentration and kinetics in human were predicted and compared with observed datas. Moxifloxacin penetrated and accumulated with high concentrations in redmarrow, lung, skin, heart, liver, kidney, spleen, muscle tissues in human with intra-abdominal infection. The predicted tissue to plasma concentration ratios in abdominal viscera were between 1.1 and 2.2. When rat plasma concentrations were known, extrapolation of a PBPK model was a method to predict drug pharmacokinetics and penetration in human. Moxifloxacin has a good penetration into liver, kidney, spleen, as well as other tissues in intra-abdominal infected human. Close monitoring are necessary when using moxifloxacin due to its high concentration distribution. This pathological model extrapolation may provide reference to the PK/PD study of antibacterial agents.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.10
• /
• pp.601-607
• /
• 2016

Piezoelectric thick films of soft $Pb(Zr,Ti)O_3$ (PZT) based commercial material (S55) were fabricated using a conventional tape casting method. Ag-Pd electrodes were printed on the piezoelectric film at room temperature and all 5 layered films with a dimension of $12mm{\times}16mm$ were successfully laminated for a multi-layered piezoelectric ceramic actuator. The laminated specimens were co-fired at $1,100^{\circ}C$ for 1 h. A flat layered and dense microstructure was obtained for the $112{\mu}m$ thick piezoelectric actuator after sintering process. Thereafter, a prototype piezoelectric speaker was fabricated using the multi-layered piezoelectric ceramic actuator which can operate as a bimorph. Its SPL (sound pressure level) characteristic was also evaluated for speaker application. Frequency response revealed that the output SPL with a root mean square voltage of 10 V increased gradually to the highest peak of 87.5 dB for 1.5 kHz and exhibited a relatively stable behavior over the measured frequency range (${\leq}20kHz$) at a distance of 10 cm, implying that the fabricated piezoelectric speaker is potential for speaker applications.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.601-610
• /
• 2007

Statement of problem: The adhesion between titanium and ceramic is less optimal than conventional metal-ceramic bonding, due to reaction layer form on cast titanium surface during porcelain firing. Purpose: This study characterized the effect of titanium-ceramic adhesion after gold and TiN coating on cast and wrought titanium substrates. Material and method: Six groups of ASTM grade II commercially pure titanium and cast titanium specimens$(13mm{\times}13mm{\times}1mm)$ were prepared(n=8). The conventional Au-Pd-In alloy served as the control. All specimens were sandblasted with $110{\mu}m\;Al_2O_3$ particles and ultrasonically cleaned for 5min in deionized water and dried in air before porcelain firing. An ultra-low-fusing dental porcelain (Vita Titankeramik) was fused on titanium surfaces. Porcelain was debonded by a biaxial flexure test at a cross head speed of 0.25mm/min. The excellent titanium-ceramic adherence was exhibited by the presence of a dentin porcelain layer on the specimen surface after the biaxial flexure test. Area fraction of adherent porcelain (AFAP) was determined by SEM/EDS. Numerical results were statistically analyzed by one-way ANOVA and Student-Newman-Keuls test at ${\alpha}=0.05$. Results: The AFAP value of cast titanium was greatest in the group 2 with TiN coating, followed by group 1 with Au coating and the group 3 with $Al_2O_3$ sandblasting. Significant statistical difference was found between the group 1, 2 and the group 3 (p<.05). The AFAP value of wrought titanium was greatest in the group 5 with TiN coating, followed by the group 4 with Au coating and the group 6 with $Al_2O_3$ sandblasting. Conclusion: No significant difference was observed among the three groups (p>.05). The AFAP values of the cast titanium and the wrought titanium were similar. However the group treated with $Al_2O_3$ sandblasting showed significantly lower value (p<.05).