• Journal of Powder Materials
• /
• v.1 no.2
• /
• pp.135-144
• /
• 1994

Silicon carbide powder was prepared from mixtures of Sangdong silica sand and carbon black by SHS (Self propagating High temperature Synthesis) method which utilizes magnesiothermic reduction of silica. In the powder preparation process, the reacted powder was leached by chloric acid to remove the magnesium oxide and was subsequently roasted to remove free carbon. The impurities were mostly eliminated by hot acid treatment. The resultant SiC powder showed the mean particle size of 0.22 ${\mu}{\textrm}{m}$ and the specific surface area of $66.55 m^2/g$. The SiC powder was mixed with 1 wt% of boron and of carbon to increase densification rate. The mixed powder was pressed and sintered pressurelessly at $2100^{\circ}C$ for 30 min in argon gas. The sintered body showed the hardness of $2550 kg{\cdot}f/mm^2$ and the fracture toughness, KIC of $3.47 MN/m^{3/2}$.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.104-105
• /
• 2014

마이크로 패턴된 Au 전극사이에 얼라인된 Tellurium (Te) 나노리본들이 의도한 모양과 배열방식을 가지고 리쏘그래피 패턴 전해증착 (Lithographically patterned nanowier electrodepositon, LPNE) 방법에 의해 4인치 Si wafer 배치로 합성되었다. 합성된 Te 나노리본은 수 센티미터의 길이를 가지고, 그 두께와 폭 역시 작업 전극으로 사용되는 Si wafer위에 증착된 Ni의 두께와 전해증착 시간에 의해 쉽게 제어될 수 있다. $3{\mu}m$의 간격을 갖는 Au 전극 사이에 얼라인된 두께 ~100nm의 Te 나노리본들은 전해증착에 의해 그 폭이 제어되었고, 각각의 다른 폭을 갖는 증착된 하나의 Te 나노리본들의 IV 및 FET 측정을 통하여 나노리본 폭의 변화에 따른 전기적 특성 (비저항, FET 이동도 및 FET 캐리어 농도)이 평가되었다.

• Journal of the Korean Ceramic Society
• /
• v.37 no.12
• /
• pp.1165-1171
• /
• 2000

Ti-C-Ni 혼합분말을 이용하여 SHS 공정에 의해 TiC-Ni 복합체를 제조하였으며, 리칭(leaching) 공정을 통하여 Ni을 제거함으로써 TiC 분말을 얻었다. TiC 분말의 특성분석을 위하여 XRD, SEM, TEM, AES 등을 사용하였다. 리칭 공정에 의해 얻어진 TiC 분말은 구형을 유지하고 있으며, 평균 입자크기는 0.4$\mu\textrm{m}$였다. 구형 TiC 분말을 다시 Ni 분말과 혼합하여 소결한 후 특성을 분석하였다. 140$0^{\circ}C$에서 소결하였을 때 TiC 입자는 구형에서 각진 형태로 변화하였다. 기계적 특성결과 상용 TiC 분말을 사용하였을 때보다 SHS 공정에 의해 제조된 TiC 분말을 사용하여 소결하였을 경우 파괴 인성값이 약 20% 증가하였다.

• Journal of the Korean Ceramic Society
• /
• v.45 no.11
• /
• pp.713-718
• /
• 2008

PSZT are selected and SHS are applied to each system. The sintering properties of PSZT powders showed $7.754g/cm^3$ of sintered density and $4{\mu}m$ of grain size at sintering temperature of $1250^{\circ}C$. Curie temperature lowered gradually from $363.6^{\circ}C\;to\;319.2^{\circ}C$ and relative dielectric constants increased rapidly by a quantity of Sr. This remarkable contrast in dielectric properties with powder preparation methods, in this study, was not due to grain size and sintered density but rather a crystallinity and sinterability of synthesized powders, extra-supplied Pb during reaction, mol fraction of rhombohedral phase and purity of starting materials.

• Electrical & Electronic Materials
• /
• v.9 no.9
• /
• pp.906-910
• /
• 1996

Ferroxplana N $i_{2}$Y(B $a_{2}$N $i_{2}$F $e_{12}$ $O_{22}$ ) magnetic particles, which is one of the hexagonal ferrite were synthesized by a coprecipitation method. The coprecipitates were prepared by adding aqueous solution of BaC $I_{2}$ - 2 $H_{2}$O, NiC $I_{2}$ - 6 $H_{2}$O and FeC $I_{3}$ - 6 $H_{2}$O(of which the mole ratio is $Ba^{+2}$ : N $i^{+2}$ : F $e^{3+}$= 1 : 1 : 6) to a mixture of NaOH and N $a_{2}$C $O_{3}$. The shape of Ferroxplana N $i_{2}$Y magnetic particles obtained at 1, 100(.deg. C) was hexagonal plate-like, average particle size and aspect ratio were 2(.mu.m) and 7, respectively.y.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.795-797
• /
• 1998

This paper suggests a design method of the optimal PD control system having robust performance. This PD control system is designed by applying genetic algorithm(GA) with reference model to the optimal determination of proportional(P) gain and derivative(D) gain that are given by PD servo controller. These proportional and derivative gains are simultaneously optimized in the search domain guaranteeing the robust performance of closed-loop system. This PD control system is applied to the fuel-injection control system of diesel engine and compared with ${\mu}$ -synthesis control system for robust performance. The effectiveness of this PD control system is verified by computer simulation.

• Journal of the Korean Ceramic Society
• /
• v.24 no.2
• /
• pp.147-154
• /
• 1987

Silicon nitride powders were prepared by the simultaneous reduction and nitridation from powder mixtures of Kim cheon quartzite and carbon (graphite or carbon black) at1400$^{\circ}C$ for 10 hours in nitrogen atmosphere. The effects of the reaction variables on the yield of products and on the ${\alpha}$/${\beta}$ ratio were examined. The average particle size, density, and the ${\alpha}$/${\beta}$ ratio of the obtained si3N4 were 1.0$\mu\textrm{m}$, 3.10g/㎤ and 90/10, respectively. It was found that the Si3N4 powders obtained in this work were comparable to the foreign commercial products.

• YAKHAK HOEJI
• /
• v.17 no.4
• /
• pp.223-234
• /
• 1973

Sixteen compounds of N-aroyl-N'-(4'-alkoxyphenyl) thiourea derivative, twenty one compounds of N-aeryl-N'(3'-hydroxy-4'-alkoxycar-bonylphenyl) thiourea derivative, three compounds of N-aeroyl-N'-.alpha.-naphthyiourea derivative and three compounds of N-cyanoacetyl-N'-aroyl thiosemicarbazide derivative were syntrhesized as potential antitubercular agent and were subjected to screening test for antitubercular activity against Mycobacterium turberculosis H/sub 37/Rv by tube dilution method in vitro. Of the fourty three eompounds, N-p-cyanobenzoyl-N'-(4'-iso-butoxyphenyl) thiourea, N-p-cyanobenzoyl-N'-(4-n-amoxyphenyl)thiourea, N-furoyl-N'-(3'-hydroxy-4'-ethoxycarbonylphenyl)thiourea, N-p-cyanobenzoyl-N'-(3'-hydroxy-4'-n-butoxycarbonylphenyl)thiourea, N-p-cyanobenzoyl-N'-(3'-hydroxy-4'-n-amoxycarbonylphenyl)thiourea, and N-5-nitrofuroyl-N'(3'-hydroxy-4"-n-amoxycarbonylphrnyl)thiourea showed the growth inhibition of M. tuberculosis H/sub 37/Rv at the coccentraction og 10.mu.g/ml, respectively.

• YAKHAK HOEJI
• /
• v.45 no.6
• /
• pp.724-729
• /
• 2001

Melanogenesis is a physiological process resulted in the synthesis of melanin pigments, which has a role in protecting skin front the damaging effect of ultra-violet (UV) radiation. The main aim of the present study was to examine the effect of Ulmus davidiana var. japonica(UL) on Melanogenesis. Cells were cultured in the presence of various concentrations of Ulmus davidiana var. japonica for 48 h, and there were estimated total melanin contents as a final product and activity of tyrosinase, a key enzyme, in Melanogenesis. Among the four solvent extracts tested, EtOAc extract mostly increased tyrosinase activity, And EtOAc extract increased the melanin contents and tyrosinase activity in a dose-dependent manner. Especially It was observed that 100$\mu\textrm{g}$/ml EtOAc extract promotes melanin secretion in B16/F10 melanoma cells by 140% at 48 h treatment and activity of tyrosinase increased by 180% in the presence of same concentration. In conclusion, as for EtOAc extract treatment, there was no effect on the viability of B16/F10 cell, only to stimulate Melanogenesis.

• YAKHAK HOEJI
• /
• v.46 no.5
• /
• pp.295-300
• /
• 2002

To observe the structure-activity relationship of lupane derivatives both on cytotoxic and antiangiogenic activity, twelve lupane derivatives were prepared; their antiangiogenic and cytotoxic activities were evaluated. Among them, four compounds were more cytotoxic than betulinic acid. Carboxylic acid at C28 seemed to be essential for cytotoxic activity. But, a selective cytotoxicity toward SK-MEL-2 was not observed. As for antiangiogenic activity, none of the compounds except lupeol showed antiangiogenic activity at 30 $\mu\textrm{g}$/mL.