• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.312-312
• /
• 2009

본 연구에서는 Thermal evaporator(저항 가열 식 진공 증착법) 장비를 활용하여 ZnS/$Na_3AlF_6$/ZnS/Cu-$0.25\lambda$, ZnS/$CaF_2$/ZnS/Cu-$0.25\lambda$의 다층 박막을 glass 기판위에 증착하였다. 증착 전에 EMP(Essential Macleod Program)을 활용하여 광학적 특성을 simulation하였으며 다층 박막 제작 후 Spectrophotometer를 사용하여 반사율 및 색상을 CIE $L^*a^*b^*$ 좌표에 표시하여 고 굴절 물질에 따른 광학적 특성을 EMP simulation과 비교하였다. AES depth profile을 분석하여 막의 두께 및 층간 확산여부에 관하여 관측 하였다. 저굴절 물질을 Na3AlF6로 사용하였을 경우 simulation과 결과 값 모en purple 계통의 색상을 나타냈으며 CaF2를 사용하였을 경우 simulation은 purple 계통의 색상, 결과값은 red-yellow 계통의 색상으로 나타났다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1356-1359
• /
• 2007

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.845-848
• /
• 2002

The study of photoconductor materials is demanded for development for flat-panel digital x-ray Imager. In this paper, We investigated the feasibility of application as x-ray image sensor using Cd(Zn)Te compound with high stopping power on high radiation. These Cd(Zn)Te samples were fabricated by vacuum thermal evaporation method to large area deposition and investigated I-V measurement as applied voltage. The experimental results show that the additional injection Zn in CdTe film reduced the leakage current, for the $Cd_{0.85}Zn_{0.15}Te$ detector, the net charge had the highest value as $144.58pC/cm^2$ at 30 V.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.121-121
• /
• 2005

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.08a
• /
• pp.25-30
• /
• 2002

The ternary semiconducting compounds of the $A_{4}BX_{6}$(A=Cd, Zn, Hg; B=Si, Sn, Ge; X=S, Se, Te) type exhibit strong fluorescence and high photosensitivity in the visible and near infrared ranges, so these are supposed to be materials applicable to photoelectrical devices. These materials were synthesized and single crystals were first grown by Nitsche, who identified the crystal structure of the single crystals. In this paper. author describe the undoped and $Co^{2+}$-doped $Zn_{4}SnSe_{6}$ single crystals were grown by the chemical transport reaction(CTR) method using iodine of $6mg/cm^{3}$ as a transport agent. For the crystal. growth, the temperature gradient of the CTR furnace was kep at $700^{\circ}C$ for the source aone and at $820^{\circ}C$ for the growth zone for 7-days. It was found from the analysis of x-ray diffraction that undoped and $Co^{2+}$-doped $Zn_{4}SnSe_{6}$ compounds have a monoclinic structure. The optical absorption spectra obtained near the fundamental absorption edge showed that these compounds have a direct energy gaps. These temperature dependence of the optical energy gap were closely investigated over the temperature range 10[K]~300[K]

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1884-1886
• /
• 2005

KrF 펄스 레이저 증착법(pulsed laser deposition: PLD)으로 ZnO 박막을 증착하여 평판 디스플레이 소자 구동용 박막 트랜지스터(thin film transistor) 소자를 제작하였다. 전도성이 높은 실리콘웨이퍼(c-Si, 하부전극) 기판 위에 LPCVD 법으로 silicon nitride 박막을 절연막으로 형성하고, 다양한 공정 조건에서 펄스 레이저 증착법으로 제작한 ZnO 박막을 증착하여 채널층으로 하였으며, Al 박막을 증착하고 패터닝하여 소스 및 드레인 전극으로 하였다. ZnO 박막의 증착 시에 기판 온도를 다양하게 조절하고 산소 분압을 변화시켜 ZnO 박막의 특성을 조절하였다. 제작된 박막의 표면특성은 AFM(atomic force microscopy)로 분석하고, 결정특성은 XRD(X-ray diffraction)로 조사하였다. ZnO 박막의 전기적 특성은 Hall-van der Pauw 법으로 측정하였고, 광학 투과도(optical transparency)를 UV-visible photometer로 조사하였다. ZnO-TFT 소자는 $10^6$ 수준의 on-off ratio와 $2.4{\sim}6.1cm^2/V{\cdot}s$의 전계효과이동도(field effect mobility)를 보였다.

• Journal of Hydrogen and New Energy
• /
• v.16 no.3
• /
• pp.269-276
• /
• 2005

Zn, Bi 와 V 금속이온 전구체를 사용하여 모노클리닉 결정구조를 갖는 신규 ZnBiVO4 광촉매를 손쉽게 합성 할 수 있는 방법을 개발하였다. 합성된 $ZnBiVO_4$ 광촉매는 XRD 과 FESEM등을 이용하여 미세구조를 분석하였으며, 분석결과 본 삼성분계 금속산화물 반도체 광촉매는 모노클리닉 결정구조를 갖는 것을 알 수 있었다. 저온 수용액방법에 의해 손쉽게 나노 구조를 갖는 $ZnBiVO_4$가 제조되었으며, 그 광촉매의 최소 입자크기는 20-30 nm 이다. $ZnBiVO_4$ 광촉매는 UV-visible DRS (diffuse reflectance spectroscopy)로 그 띠간격(band gap)을 측정하였으며, FT-IR을 사용하여 구조 및 물질 상의 순도를 확인하였다. 그리고 $H_2S$를 광분해하여 수소를 발생하는($122ml/hr{\cdot}g$) 우수한 광촉매 활성을 보여 주었다.

• Journal of the Korean Ceramic Society
• /
• v.30 no.9
• /
• pp.723-730
• /
• 1993

The mechanism of formation of perovskite phase and the dielectric properties of PZMN[Pb(Zn, Mg)1/3Nb2/3O3] ceramics were examined using two different types of the columbite precursors, (Mg, Zn)Nb2O6 (MZN) and MgNb2O6＋ZnNb2O6 (MN＋ZN). The formatin of perovskite phase in PbO＋MN＋ZN system is characterized by an initial rapid formation of Mg-rich perovskite phase, followed by a sluggish formation of Zn-rich perovskite phase. On the other hand, thepyrochlore/perovskite transformation in the PbO＋MZN system proceeded uniformly with a spatial homogeneity. The degree of diffuseness of the rhombohedral/cubic phase transitionis higher in the PbO＋MN＋ZN system than in the PbO＋MZN specimen, indicating a broadened compositional distributjion of the B-site catons (Nb+5, Zn+2, Mg+2) in the PbO＋MN＋ZN system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.813-816
• /
• 2002

We investigate the junction between CdZnTe and a variety of metals with the aim of determining whether the choice of metal can improve the performance of X-ray image detectors, in particular minimizing the dark current. The samples consist of $5{\mu}m$ thick CdZnTe with top electrodes formed from In, Al, and Au. For each metal, current transients following application of valtages from -10V to 10V are measured for up to 1 hour. We find that dark currents depending on the metal used. The current is controlled by hole injection at the metal-CdZnTe junction and there is consistent trend with the metal's work function possibly and it seems that metal to CdZnTe layer junction is ohmic contact.

• Journal of the Korean Vacuum Society
• /
• v.16 no.6
• /
• pp.463-467
• /
• 2007

Structure and optical properties of ZnO epilayers grown on oxygen- and hydrogen-plasma treated sapphire substrates by plasma-assisted molecular beam epitaxy (denoted as samples A and B, respectively) have been investigated by various techniques. The crystal quality and structural properties of the surface for the ZnO epilayers were investigated by high-resolution X-ray diffraction and atomic force microscope. For investigating the optical properties of excitonic transition of ZnO, we carried out photoluminescence experiments as a function of temperature. The free exciton, bound exciton emission and their phonon replicas were investigated as a function of temperature from 10 to 300 K, and the intensity of excitonic PL peak emission from the sample A is found to be higher than that of sample B. From the results, we found that sample A has better crystal structure quality and optical properties as compared to sample B. The number of oxygen vacancies may be decreased in sample A, resulting in an enhancement of the crystal quality and a higher intensity of excitonic emission band as compared to sample B.