• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.993_994
• /
• 2009

본 논문에서는 RGB 멀티칩 LED모듈을 구성하고 포워드 컨버터 방식의 Red LED의 구동전압인 13V 및 Green과 Blue LED의 구동전압인 21V의 다중출력 SMPS를 설계하였다. 설계 제작된 SMPS로 RGB 멀티칩 LED 모듈을 구동하였으며 21V 및 13V의 전압 출력이 안정적으로 구동됨을 확인하였으며 Red, Green, Blue 각각의 LED는 안정적으로 구동됨을 확인하였다. 또한 구동용 SMPS는 역률제어를 통하여 안정성을 향상시켰다.

• Journal of Industrial Technology
• /
• v.29 no.B
• /
• pp.187-191
• /
• 2009

Recently, we have used LEDs to illumination because it has a high luminous efficiency and prolong lifespan. However the light power and lifetime is reduced by junction temperature increment of LED. So it is important to measure the junction temperature accurately. In case of using a electrical method measuring junction temperature of LED. Temperature measurement errors are spontaneously generated because of a parasitic capacitances in LED. In this paper, we proposed a method that reducing LED's parasitic capacitance effects for electrical measurement. It was demonstrated by the experimental result that is more correct than established method.

• Journal of Industrial Technology
• /
• v.30 no.B
• /
• pp.75-81
• /
• 2010

This paper presents the development of LED street light lamp which is controled by central command system. This system includes a lamp unit controller, data repeater and command repeater as well as the LED lamps. These devices enable the individual power control and partial on/off control of the LED lamps by the control repeater through full duplex communication line. Also, they have the ability to control the brightness and period of on/off timing by detecting the car's existence. As a result of this development, it is founded that the performances of the system have been satisfied to apply for the actual road test.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2174-2182
• /
• 2013

This paper analyzed the PHY technology of IEEE 802.15.7 which is a technology trend and international standard of the LED-based VLC communication system. Also, the study analyzed the complexity of the system as well as the reception performance in a visible light wireless channel environment by analyzing detailed technology of PHY I mode and designing the RS code and block interleaver. According to the result, concerning PHY I which is operated in a single mode, it was confirmed that the complexity in designing the system was higher compared with an environment of the transmission of a short massage. Also it was confirmed that in a multi-path visible light channel environment, the reception SNR=1.5dB was required additionally.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.12
• /
• pp.947-951
• /
• 2009

LED has the merits of high reliability, semi-permanent life, rapid-response and its small size for use as light source of head lamp. But the dependence of its performance and life on temperature affect on its practical use. Which dependence makes problem when the LED is heated up to a higher temperature level by self-generation of heat, due to "highly integration" to get enough quantity of light. To solve this problem, effective cooling system is needed that consider conduction, convection and radiation. This study points out the limits of natural convection cooling system and propose of forced convection with heat sink. Also, it describes a correlation between heat sink area and fluid velocity using numerical analysis to optimize the cooling system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1240-1245
• /
• 2011

In this paper, channel modeling and analysis of wireless visible light communication(VLC) were studied in indoor circumstance. Photons emitted from LED straightly moved and navigated within indoor, after that a part of photons reached on PD via LOS(Line Of Sight) or NLOS(None Line Of Sight). These received signals had characteristics of delay profile and attenuation, which was multiple-path fading. In this paper, computer simulation of VLC channel was executed under the condition that two LEDs were used for transmitter and three PDs were located at different positions of the 20*8*2.3m sized indoor. BER performance simulation was excuted based on the characteristics of each VLC channel.

• Journal of the Semiconductor & Display Technology
• /
• v.23 no.1
• /
• pp.84-87
• /
• 2024

A water sterilization system is developed utilizing a 275 nm-wavelength LED light source equipped with a TIR lens. The system's light source is constructed by combining a 275 nm-wavelength UVC LED, known for its germicidal properties, with a TIR lens having a direction angle of 6.8 degrees. The optical simulation software 'LightTools' is employed to design and optimize the intensity of deep ultraviolet sterilizing light irradiation, its distribution, and sterilization capacity. In the inactivation experiment with E. coli, the water sterilizer system achieved a sterilization rate of 78.92 % while maintaining a water flow capacity of 50 L/min. Compared to the conventional mercury lamp light source water sterilizer system, the UVC LED water sterilizer system addresses environmental concerns related to mercury usage and offers advantages in terms of lifespan and durability.

• Journal of Bio-Environment Control
• /
• v.20 no.3
• /
• pp.182-188
• /
• 2011

This research was conducted to evaluate the effect of supplemental light-emitting diode (LED) light on growth characteristics and phytochemical content of pepper (Capsicum annuum L.) seedling using LED blue (470 nm, B), red (660 nm, R), blue + red (BR), far red (740 nm, FR) and UV-B (300 nm) light treatment, and without artificial light. Photon flux of LED light was 49, 16, 40, 5.0 and $0.82{\mu}mol\;m^{-2}s^{-1}$ for B, R, BR, FR, and UV-B light, respectively, during experiment. Supplemental LED light duration was $16hr\;day^{-1}$ and UV-B light duration was 10 min. per day after sunset up to 15 days (12 days after germination) of plants age. In our research, growth characteristics and phytochemical content of pepper seedlings were greatly influenced by supplemental LED light compare to control treatment. Red light increased the number of leaves, number of nodes, leaf width and plant fresh weight by 34%, 27%, 50% and 40%, respectively. Blue light increased the leaf length by 13%, and stem length and length of inter node were increased by 17% and 34%, respectively under grown far red light. After 15 days of light treatments phytochemical concentrations of pepper plants were significantly changed. Blue light enhanced the total anthocyanin and chlorophyll concentration by 6 times and 2 times, respectively. Red light increased the total phenolic compound at least two folds meanwhile far red light reduced the ascorbic acid and antioxidant activity 31% and 66%, respectively compared to control treatment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.1
• /
• pp.1-8
• /
• 2015

To produce the white light, there are a single chip method using the blue light and phosphor coating, a multi chip method by mixing R, G, B light.. Multi chip method is proper for the smart lighting system by controling color and color temperature. And color rendering of single chip LED is good by even spectral distribution. To apply application technic like smart light system, this paper analyzed the properties of single chip LED and RGB multi chip LED, and implemented the 2 part subject evaluation for single chip LED and RGB multi chip LED. The first part is comparison of properties for single chip LED and RGB multi chip and second part is color appearance evaluation of 8 colors in each lighting environment.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.119-124
• /
• 2007

24" LCD Monitor용 LED BLU를 개발하기 위하여 1.5W R,G,G,B가 하나의 PKG에 들어있는 LED를 이용하여 Direct type의 Back Light Unit을 개발하였다. 방열 및 휘도 균일도를 고려하여 LED part를 설계, 개발 하였고 LED를 pulse로 구동하기 위하여 Switching circuit이 포함되는 구동회로 부분을 설계, 개발하였다. 또한 Color Sensor와 ICM (Integrated Color Management) IC를 사용하여 Color를 Control하는 제어회로 부분도 개발을 하였다. 제어회로 부분을 개발하기 위하여 MicroController를 사용하였으며 ICM IC와의 통신을 위한 부분도 개발하였다. 이러한 구성을 개발하여 시제품을 직접 제작하였다. 평가를 위하여 성능시험을 실시하였고 광학적인 평가도 시행하였다. 제작된 시제품은 $L558{\times}W359{\times}H30$으로 하였다. 휘도는 목표휘도를 이루었으며 균일도는 85% 이상이 되었다.