• Korean Journal of Plant Resources
• /
• v.32 no.3
• /
• pp.228-236
• /
• 2019

This study is conducted to investigate the effects of growth characteristics (GC) and DPPH radical scavenging activity (DRSA) of the heading lettuce 'Fidel' depending on four concentrations of activated mineral groups (AMG: 1.6% active minerals and 0.03% CaO) added to basic nutrient solutions (diluted by 0, 0.05, 0.1, and 0.2%) and on four different light-emitting diodes (LED; B:R:W ratio = 0:1:12, 0:1:9, 0:5:5, and 2:3:5). Both 0.1 and 0.2% AMG showed better GC of lettuce in plant width, plant length, leaf width, leaf length, and the number of leaves than those of other AMG, while leaf thickness and chlorophyll value did not show significant difference among all AMG. Moreover, 0.1 and 0.2% AMG showed heavier shoot fresh weights than those of other AMG. As for the combinations of AMG and LED, B0:R5:W5 showed the best lettuce GC regardless of AMG compared to other AMG and LED combinations. As shown in the above results of LED, although there was a difference in lettuce growth by LED, the differences of lettuce growth by AMG were statistically significant. The DRSA was the highest at 82.8% in B2:R3:W5, followed by B0:R5:W5 at 77.8%. LED showed differences but AMG did not affect DRSA. Therefore, the optimal conditions in plant factory for GC and DRSA of the lettuce were 0.1% AMG and B0:R5:W5.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9B
• /
• pp.1117-1125
• /
• 2011

In this paper, as a study of the simple visible light communication(VLC) with LED light, the visible light communication system that are made up with the $3{\times}3$ white LED array for visible light transmission, various photodiodes for visible light reception, and a non-carrier NRZ-OOK modulation scheme is designed and implemented to have a 115.2 kbps data speed at 2.5 m distance between transmitter and receiver. For the performance analysis of the developed VLC system, the maximum distance between VLC transmitter and receiver on the conditions of various transmission speeds, the number of LED array, or the various kind of LED and photodiode is obtained, and various performances are analyzed by experiments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1252-1257
• /
• 2011

In this paper, efficient functions for audio spectrum mapping with visible spectrum are proposed. Through mapping overall hearing frequency band with visible frequency band, emotional lighting might be possible. We propose a basic linear mapping function and non-linear mapping functions emphasizing specific audio frequency bands. For the algorithm implementation, spectrum analysis method and filter method are introduced. Especially, in this paper, a prototype LED lighting equipment using the digital filter method is implemented. The proposed lighting method can be applied to many LED lighting area using music.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.313-313
• /
• 2014

GaN계 물질 기반의 광 반도체는 조명 및 디스플레이 관련 차세대 광원으로 많은 관심을 받고 있고, 효율 증대를 위한 에피, 소자 구조 및 패키지 등의 많은 연구가 진행되고 있다. 특히, 투명 전극을 이용한 광 추출 효율의 증가에 대한 연구는 전체 외부양자효율을 증가시키는 중요한 기술로 각광을 받고 있다. 이러한 투명전극은 가시광 영역의 빛을 투과하면서도 전기 전도성을 갖는 기능성 박막 전극으로 산화인듐주석이 널리 사용되고 있으나 인듐 가격의 상승과 산화인듐주석 전극 자체의 크랙 특성으로 인하여 많은 문제점이 지적되고 있다. 이러한 문제를 극복하기 위하여 GaN계 발광 다이오드에 있어서 산화인듐주석 투명 전극의 대체 물질들에 대한 많은 연구들이 활발하게 이루어 지고 있다. 특히, 투명전극 층으로 사용되는 산화인듐주석 대체 박막으로 산화아연에 대한 연구가 각광을 받고 있는 실정이다. 또한, 발광 다이오드의 효율 증가를 위해 발광소자에 표면 요철 구조 형성과 나노구조체 형성 등 박막 표면의 구조 변화를 통한 광추출효율 향상에 대한 많은 연구가 진행되고 있다. 본 연구에서는 산화아연 박막을 투명전극으로 사용하였으며 광추출효율 향상을 위해 산화아연 투명전극에 패터닝을 형성하고, 그 위에 산화아연 나노막대를 형성하여 기존에 사용하던 산화아연 투명전극보다 우수한 추출효율 및 전류 퍼짐 향상 구조를 제안하고 이에 따른 LED 소자의 광추출효율 향상을 연구하였다. 금속유기화학증착법을 이용하여 c-면 사파이어 기판에 n-GaN, 5주기의 InGaN/GaN 다중양자우물 구조 및 p-GaN의 간단한 LED구조를 성장한 후, p-GaN층 상부에 원자층 증착법을 이용하여 투명전극인 산화아연 박막을 60 nm 두께로 증착하였다. 산화아연 투명전극만 증착한 LED-A와 이후 0.1% HCl을 이용한 습식식각을 통하여 산화아연 투명전극에 육각형 모양의 패턴을 형성한 LED-B, 그리고 LED-B위에 전기화학증착법을 이용하여 $1.0{\mu}m$의 산화아연 나노 막대를 증착한 LED-C를 제작하였다. LED-A, -B 및 -C에 대한 표면 구조는 SEM이미지를 통하여 확인한 바 산화아연의 육각 패턴과 그 상부에 산화아연의 나노막대가 잘 형성된 것을 확인하였다. I-L 분석으로부터 패턴이 형성되지 않은 산화아연 투명전극으로만 구성된 LED-A에 비하여 산화아연 투명 전극에 육각 패턴을 형성한 LED-B의 전계 발광 세기가 더욱 큰 것을 확인하였다. 또한, 육각 패턴에 산화아연 나노막대를 성장시켜 융합구조를 형성한 LED-C에서는 LED-B와 -A보다 더 큰 전계 발광세기를 확인할 수 있었다. 특히, 인가 전류가 고전류로 갈수록 LED-C의 발광세기가 더욱 강해지는 것으로 효율저하현상 또한 나노융합구조의 LED-C에서 확인할 수 있었다. 이는 기존 산화아연 투명전극에 육각형의 패턴 및 나노막대융합구조를 형성할 경우 전류퍼짐현상을 극대화 할 뿐 아니라, 추가적인 광추출효율 향상 효과에 의해 질화갈륨 기반LED 소자의 광효율이 증가된 것으로 판단된다.

• Journal of Bio-Environment Control
• /
• v.26 no.3
• /
• pp.208-214
• /
• 2017

This study aimed to determinate the effect of fluorescent light and light-emitting diodes on the leaf morphology, growth and antioxidant capacity of Salvia plebeia. The plants were grown for 56 days after transplanting (DAT) under the fluorescent light (FL) and LEDs (White, Red and Blue (R+B, ratio 2:1), Blue, Red LED) under the same light intensity and photoperiod ($130{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, 12 hours). Leaf length, width and number of Salvia plebeia at the 56 DAT were significantly higher under the FL and red LED, and lower in the RB LED and white LED. The highest fresh and dry weights of shoot and leaf area were observed in the red LED, followed by the FL and blue LED, and the lowest in the RB LED and white LED. After 21 DAT, leaf apinasty symptom was appeared in plants grown under red LED and RB LED. The chlorophyll content was lower in the red LED. The specific leaf weight, the ratio of leaf dry weight to area, was higher in the blue LED, and lowest in the FL. No significant difference in DPPH radical scavenging activity of Salvia plebeia under the different light sources. All the integrated results suggest that the FL light is a proper light conditions for a closed cultivation of Salvia plebeia.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.282-282
• /
• 2010

LED Device was designed of electronic circuits of electrical power part for used Pspice student version and used Infrared LED lamps of load part. LED was used Computerized Electronic Medical Infrared Thermographic Imaging System for body surface Investigation of variable Body thermal asymmetry. It was knowledge body thermal Asymmetry of body surface and quantity body surface of electromagnetic wave to inflow electrical power part.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.113-114
• /
• 2012

• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.54-63
• /
• 2018

Red and blue lights are effective wavelengths for photosynthesis in plants. In this study, we determined the effects of various combined ratios of red to blue LEDs on the quality of cherry tomato seedlings prior to transplantation, and their subsequent effects on the yield and quality of tomato fruits after transplanting. Two-week-old cherry tomato seedlings (Solanum lycopersicum cv. 'Cuty') were cultivated under various combined ratios of red (R; peak wavelength 655 nm) to blue (B; 456 nm) LEDs [red:blue = 41:59 (59B), 53:47 (47B), 65:35 (35B), 74:26 (26B), 87:13 (13B), or 100:0 (0B)] and fluorescent lamps and raised for 27 days. The cherry tomato seedlings were subsequently transplanted into a venlo-type greenhouse and cultivated for 75 days. At the seedling stage, the shoot fresh weight of seedlings in all RB combined treatments, except 0B and 59B, was higher than that of the control after 27 days of LED treatment. Shoot dry weight and leaf area also showed trends similar to that of shoot fresh weight. The stem length was significantly higher in 13B, 26B, and 35B treatments compared with the control and other treatments. In particular, the stem length of 26B plants was approximately 3.2 times longer than that of 59B plants. At 37 days after transplanting, the number of nodes was significantly higher in 26B and 47B plants, and the plant height of 26B plants was significantly higher than that of control and 59B plants. Total fruit yield in 26B plants, which was the highest, was approximately 1.6 and 1.8 times higher than that in control and 59B plants, respectively. Thus, the results of this study indicate that various combined ratios of red to blue LEDs directly affected to the growth of cherry tomato seedlings and may also affect parameters of reproductive growth such as fruit yield after transplantation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9B
• /
• pp.1108-1116
• /
• 2011

The visible light communication system that transmits data by controlling light emission of LED and receives data through photo detecter is considered as one of the strong candidates of the next generation wireless communication systems. The visible light communication provides both lighting and wireless communication wherever the LED lamps are installed. Due to the feature of visible light communication system, the communication is possible within the area that LED light reaches, and the communication quality depends on the light intensity received at the receiver. In this paper, we analyze the effects of LED panel position and lighting angel on communication channel quality in visible light communication systems. Through computer simulations, we prove that position of LED panel and light angle have a great impact on illuminance and SNR of the visible light communication systems.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.5
• /
• pp.643-648
• /
• 2011

In this study, SMPS driven LED traffic signal light for Large-scale traffic such as railroad and airport was designed and its electrical and EMI characteristics were measured. The output current of the LED module driven by SMPS was 1.67A for AC and DC input voltage over 10V. The conducted emission measured over 0.15~30MHz frequency range was lower than the allowed quasi-peak and average level, and the radiated noise measured over 30~1000MHz frequency range showed $23.96dB{\mu}V/m$ at 59.96MHz.