• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.479-482
• /
• 2006

The absorption coefficient and backscattering properties of phytoplankton were calculated from the Mie theory. Given a simple case that phytoplankton and mineral particles are the only constitutions in seawater, the reflectance $b_b({\lambda})/[a({\lambda})+b_b({\lambda})]$was analyzed. Then the chlorophyll concentrations were estimated from remote sensing OC2 algorithm. The results show that reflectance in short wavelength region is more sensitive to the Chl variation; High mineral concentrations in seawater have significant influence on the reflectance spectrum; the existence of high mineral concentration may result in the mistake in chlorophyll estimation from OC2 algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11B
• /
• pp.1383-1388
• /
• 2011

Due to many recent activities on enforcement of the intensified environmental regulation such as the policies of curbing the greenhouse gas and the Restriction of Hazardous Substances (RoHS), the usage of Light emitting diode (LED) has been rapidly increased and energy efficient management of LED light system is regarded as an important technology to enhance the energy efficiency. In this paper, we propose an energy-efficient control scheme of LED light, being composed of multiple light sources. The proposed scheme controls the intensity of LED light source to minimize the total intensity while providing the quality of lighting service. The intensity of light is assumed to be proportional to power consumption, thus the objective is to minimize the total power consumption. A linear programming problem is formulated to find the optimal intensity of each light source and procedure to apply the proposed scheme in the real system is suggested. The performance evaluation results elucidate that the proposed scheme achieves over 20% improvement in power consumption of light intensity in comparison with the conventional dimming control scheme.

• Science of Emotion and Sensibility
• /
• v.19 no.4
• /
• pp.33-40
• /
• 2016

The purpose of this study is to improve social protection and benefits for pregnant women with the usage of LED care emblem. The study was conducted in the Seoul Metro by two research assistants on January 20th to 30th, 2015. One of subjects wore the LED care emblem and the other was present to record the data. An experiment was carried out total 60 times by wearing LED care emblem in 2 positions ((a) necklace and (b) bag), and 3 usages of Light ((1) Constant light, (2) No light which is like existing care emblem, and (3) blinking light at one-second intervals). Experimental results show there was a significant difference depending on the type of light. Mostly seat offering was the type of light (1) Constant light and it has 8 times (13.4%). The type of light (3) blinking light at one-second intervals has only 2 times (3.4%) seat offering. However, there were no seat offerings at the type of light (2) No light. Meanwhile, there were no significant differences in wearing position, time, the number of people in the train and gender. This study suggests that it is necessary to make LED care emblem with constant light in order to induce spontaneous seat offering.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.713-721
• /
• 2022

In order to use the LED video wall in the broadcasting studio, there are a few things to be aware of. First, since the pixels are closely arranged, a moire phenomenon may occur due to a short arrangement period, and second, the distance between pixels (pixel pitch) may be recorded on the image sensor of the broadcasting camera. When moire occurs or pixel pitch is observed, viewers feel uncomfortable. Moire effect can be reduced by adjusting the shooting distance or angle of the camera, but in order to prevent the pixel pitch from being recorded on the image sensor, secure a sufficient distance between the LED video wall and camera. even when the distance secured, the zoom lens used in the broadcasting studio must be operated by appropriately changing the magnification. If the focal length is changed by changing the magnification to obtain a desired angle of view, the pixel pitch may be unintentionally recorded. In this study we propose the range that the pixel pitch is not observed while changing the magnification ratio of the zoom lens when the distance from the video wall is sufficiently secured. The content was played back on the LED video wall and the LED video wall was recorded on the server using an HD camera equipped with a B4 mount zoom lens

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1499-1500
• /
• 2008

최근에 LCD의 후면광원으로 LED를 채용하는 경우가 증가하고 있다. 이러한 LED를 Back Light으로 사용할 경우 일정한 휘도의 유지와 색좌표의 보정은 고급제품의 경우 채용이 증가하고 있다. 본 연구에서는 LCD Monitor용 LED BLU의 CMS(Color Management System)을 개발하기 위하여 1.5W R,G,G,,B가 하나의 PKG에 들어있는 LED를 이용하여 Direct type의 Back Light Unit을 개발하였다. 방열 및 휘도 균일도를 고려하여 LED part를 설계, 개발하였고 LED를 PWM으로 구동하기 위하여 Switching circuit이 포함되는 구동회로 부분을 설계, 개발 하였다. 또한 Color Sensor와 CMS IC를 사용하여 Color를 Control하고 휘도도 컨트롤하는 제어회로 부분도 개발을 하였다. CMS 기능의 제어회로 부분을 개발하기 위하여 MicroController를 사용하였으며 CMS IC와의 통신을 위한 부분도 개발하였다. 이러한 구성을 개발하여 시제품을 직접 제작하였다. 평가를 위하여 성능시험을 실시하였고 광학적인 평가도 시행하였다. 제작된 시제품은 L558 x W359 x H30 으로 하였다. 휘도는 목표휘도를 이루었으며 균일도는 85% 이상이 되었다.

• Horticultural Science & Technology
• /
• v.32 no.3
• /
• pp.330-339
• /
• 2014

Growth and anthocyanins of lettuce (Lactuca sativa L., 'Mid-season') grown under LED lamps with blue light in the range of 430-470 nm or with red light in the range of 630-670 nm were analyzed in this study. Cool-white fluorescent light was used a s the control. P hotosynthetic photon flux, p hotoperiod, air temperature, relative humidity, and $CO_2$ concentration in a closed plant production system were $201{\pm}2\;{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, 16/8 hours (day/night), $22/18^{\circ}C$, 70%, and $400{\mu}mol{\cdot}mol^{-1}$, respectively. At 21 days after light quality treatment, growth characteristics and anthocyanins content of lettuce as affected by the peak wavelength of blue or red LED were significantly different. Among peak wavelengths treated in this stusy, R1 treatment (peak wavelength 634 nm) and R6 treatment (peak wavelength 659 nm) were effective for increasing leaf width, leaf area, shoot fresh weight, and photosynthetic rate of lettuce. B5 treatment (peak wavelength 450 nm) and B4 treatment (peak wavelength 446 nm) increased the anthocyanins concentration and chlorophyll content in lettuce leaves, respectively. Anthocyanins in lettuce leaves increased linearly with decreasing hue value of leaf color and with increasing SPAD value of lettuce leaves. From these results, it was concluded that the red LED with peak wavelengths of 634 nm and 659 nm and the blue LED with peak wavelengths of 450 nm can be used as potential light spectra for increasing the yield and anthocyanins accumulation of leafy vegetable.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.12
• /
• pp.38-46
• /
• 2010

For the development of 100[W] stage lighting, quantitative and uniform color mixing that applied through color adopted Simple-Inverse matching so that color mixing can be possible along Black Body Locus. R,G,B(Red, Green, Blue) LED(Light Emitting Diode) arrangement through LED package character analysis, LED module, and the characteristic of device were considered for uniform color mixing. A distance changeable optical device was built to assure high uniformity and high diffusion of not only the middle of diffusion side but also the border side. Also, we developed the control power circuit that can expand up to 6 channels which are possible for quantitative color mixing, and the high uniformity and high quantified border light for color mixing control and the verification of color mixing characteristics by composing GUI(Graphical user interface) including color mixing simulator. By presenting the experimental results of light color control, we proved the usefulness of our developed border light and the proposed color mixing method.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.251-253
• /
• 2008

This research combines LED display System with a module of solar cell which transforms solar energy to electrical energy. In order to simplify the installation and the movement of LED Display System, the system removed the conventional power distribution is developed, and that improves the advertising effect of LED Display System.

• Journal of Sensor Science and Technology
• /
• v.21 no.6
• /
• pp.429-433
• /
• 2012

In this paper, we reduced the optical noise interference in a visible light communication system using two color LEDs. In the transmitter, the original and the inverted signals of the transmitted data modulated a red LED and a blue LED, respectively. In the receiver, a differential detector which is composed of two photodetectors and an optical red filter detected the mixed signal radiated from the two LEDs. In an environment that the optical noise from a fluorescent lamp exists, the signal-to-noise ratio in this system was improved by about 20dB compared to that in the conventional system which uses a single LED and a single photodetector.

• Journal of Industrial Technology
• /
• v.29 no.B
• /
• pp.133-137
• /
• 2009

This paper presents the development of smart road line lamp system consisting light control device. It can perform the individual power control or partial on/off control of a LED lamp by control center and can detect the error of the LEDs by current sensing. Also, the ability to control the brightness and period of on/off by detecting the car's existence. This light control circuit consists of road line lamp unit device. It can give a lot of solutions when the server, which controls the whole system, is operated through CDMA(Code-Division Multiple Access) network.