• 전자공학회논문지 IE
• /
• v.46 no.3
• /
• pp.12-18
• /
• 2009

In this paper, we developed white balance correction processor for Full Color LED Display System which could be display uniformity color and soft light by adjusting brightness of red, green, blue pixel, individually. This processor correct brightness by calculating operating current of each pixel(red, green, blue LED) on the basis of characteristic curve of LED device when we named "a" as a specific characteristic value, "b" as a brightness correction value according to using time, "X" as a operating current value, and "Y" as brightness value. As the results, we solved the reduction problem of brightness for long used LED devices, according to increase entire mean of brightness value by adjusting "b" value from the brightness characteristic function.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.4
• /
• pp.43-51
• /
• 2010

In this paper, we studied line coding technology tendency for high speed data communication at LED-ID (Identification) communication system in indoor environment. A LED-ID technology is a communication using visible ray (RGB) that come out in LED device. It is energy curtailment effect and possible in ubiquitous network service applications. The LED-ID system has the above advantages about that the communication throughout the whole room is enabled by high power lighting and lighting equipment with white colored LED which are easy to install and have good outward appearance. Therefore, the transmission by light waves is more suitable for wireless networks than by radio waves. We compared with the NRZ, AMI, 4B5B, HDB3, 8B10B line coding for efficient in error detection and serves data transmission of high speed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.6
• /
• pp.175-182
• /
• 2012

Light characteristics of the monochromatic red(R), blue(B), green(G) and white(W) and the mixed LED (B-R LED) were investigated by light control a Spectrometer-MMS1 and an illuminometer. The power consumption of each LED was 1W and R LED has five wavelength bands(600nm, 640nm, 660nm, 680nm, 750nm). The light intensity of each LED was changed in a range 10~100%. As a results, the wavelength and the spectrum distribution of R LED increase with increasing light intensity but the wavelength of B, G, W LED decreases. It was found that illumination of each mononochromatic and B-R LED increases linearly with increasing light intensity. It was confirmed that the illumination intensity of R-B light has greater values than those obtained by monochromatic light at the same conditions.

• Journal of the Korean Applied Science and Technology
• /
• v.41 no.1
• /
• pp.69-82
• /
• 2024

The purpose of this study was to systematically evaluate and compare the effects of 640 nm LED irradiation and aromatherapy on the skin condition of the neck. Twenty female participants were divided into Group A (640 nm LED irradiation + aromatherapy) and Group B (640 nm LED irradiation only). Total of 8 experiments were conducted on the 2 groups twice a week. As a result of the experiment, moisture content was significantly improved in both group A (p<0.01) and group B (p<0.001), and wrinkle index was significantly improved in both group A (p<0.01) and group B (p<0.05). Additionally, the change in skin density was significantly improved in both group A (p<0.001) and group B (p<0.05), and the change in elasticity was significantly improved in both group A (p<0.001) and group B (p<0.001) as well. However, the change in skin tone was not significant in group A (p>0.05), but the change was drastically improved in group B (p<0.05). Blemishes and pigmentation changes were significantly improved in group A (p<0.05), but was not significant in group B (p>0.05). These results conclude that combining aromatherapy with 640 nm LED irradiation can be highly effective in improving skin condition of the neck.

• Food Science and Preservation
• /
• v.19 no.5
• /
• pp.645-651
• /
• 2012

The food functional properties of Pleurotus eryngii cultivated with different wavelengths of light-emitting diode (LED) light were analyzed in this study. The levels of total soluble solids of Pleurotus eryngii increased with all the LED lights, except mixed LED light ($B^*R$, $B^*G$ and $R^*G$). Thirty one kinds of components were detected by analyzing the free amino acids. The total free amino acid contents had a slightly higher tendency in the control group, but the ratios of eight essential amino acids among the total amino acids of Pleurotus eryngii cultivated under all the LED lights, including the blue light (blue, $B^*R$, $B^*G$ and $B^*R^*G^*U$) and the green light, were higher than that in the control group. K was the highest-content of mineral, and Mn was the lowest-content. The Ca content increased through cultivation under all the LED lights, except the blue light, but the Fe content (under the green and $B^*R$ lights), K content (under the red and UV-A lights) and Mg content (under the $R^*G$, UV-A and red lights) increased under the exclusive LED light. The total phenolic compounds increased by cultivation under all the LED lights, except the UV-A and mixed lights ($R^*G$ and $B^*R^*G^*U$). The DPPH radical scavenging activity was also improved by all the LED lights, except the mixed light ($R^*G$).

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1291-1296
• /
• 2005

In this paper, we prevent a display quality drop for image of characteristics brightness ununiformity depend on LED use to LED vision. It is about that method also a control system development equipped with brightness compensation function of LED vision which is done easily for LED set up of LED vision. Generally, It is calculate driving current value is attended by each brightness to brightness characteristics mathematical function establish by "Y=aX+b", When is doing brightness value for "Y", driving current value for "X", brightness compensation value by using time for "b", characteristics value for "a" ground with characteristics curve of LED. So much, First It is create brightness data of each pixel take a photograph red, green and blue of LED vision. Second It is get average error about each pixel which get average brightness value of entire. Last, It is handle a complicated for about gradationally regulation to color and brightness of image send to LED vision. Also It raise the whole average brightness value of vision adjust for "b" value to solve brightness drop problem of LED using the long time.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1760-1765
• /
• 2007

This paper shows a derating design approach for LED reliability improvement. The LED is widely used in display devices or circuits. The main failure of interest is defined as 100% reduction of the light output intensity of LED resulting from corrosion due to stresses, i.e. temperature and humidity. The lifetime is varied according to the stress levels under where the LED operates so that correlation of the lifetime to these stress levels over time is modeled through accelerated life testings. A derating design approach to accomplish a required reliability level of LED is proposed to determine adequate the stress levels. In the approach, $B_{10}$ life, Failure rate, Sensitivity Analysis of LED are used as a reliability metric.

• Horticultural Science & Technology
• /
• v.31 no.4
• /
• pp.415-422
• /
• 2013

This study was conducted to establish the optimum LED light source and quality for growth of Wasabia japonica seedlings in the LED chamber plant factory system. The light treatments were combined with four colors LED (red, blue, white, far-red), irradiation time ratio of the red and blue LED per minute(1:1, 2:1, 5:1, 10:1), and duty ratio of mixed light (100%, 99%, 97%). The growth response of W. japonica was the greatest in the R + B mixed light treatment, and seedlings grown in the red LED alone was higher than blue LED alone in the monochromic radiation treatments. In the R + B mixed LED, 1:1 ratio of R and B was the best for total biomass and tiller production. In mixed light treatments, the growth response of W. japonica was highest in the 100% duty ratio with R + B mixed light, while that was highest in the 97% duty ratio with R + B + W mixed light. Leaf area and dry weight were increased in the red light treatment alone, while specific leaf area was increased in the blue light alone. With the increasing red LED light ratio, leaf area and dry weight of W. japonica was significantly increased under the R + B mixed light treatment. In mixed light treatments, the leaf growth responses of W. japonica was highest in the 97% duty ratio with R+B mixed light, while that was highest in the 100% duty ratio with R + B + W mixed light. For cultivating W. japonica in a plant factory, treating red LED supplemented with a blue light or higher ratio of the red to blue LED was benefit to promote the growth of W. japonica.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7B
• /
• pp.606-612
• /
• 2012

Visible light communications (VLC) uses modern solid-state LEDs to broadcast information. Emerging white-light LEDs allows the combination of lighting and optical wireless communication in one optical source. In this paper, a new LED lighting using one-chip-type white LED is proposed for efficient illumination and optical wireless communications. Performance analysis such as horizontal illuminance, 3-dB cut-off frequency, inter-symbol interference, signal-to-noise ratio and bit-error rate shows the effects of the shapes of LED lighting. Performance of the proposed LED lighting under the existence of obstacles is superior to that of the existing LED lighting in illumination and optical wireless communication.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.166-169
• /
• 2007

최근에 정부의 "15/30 LED조명 보급정책"에 힘입어 개발된 8W급 조명용 LED광원의 CIE 색도좌표 (chromaticity coordinate)와 주파장(dominant wavelength)등을 측정 고찰 하였다. 적색(R), 녹색(G), 청색(B), 백색(W)순으로 주파장은 각각 620[nm], 531[nm], 465[nm], 579[nm]이고, 자극순도(excitation purity)는 0.98, 0.82, 0.97, 0.15이며, 휘도순도(colorimetric putity)는 45[%], 16[%], 279[%], 6[%]로 나타났다. Power LED의 최적배치 설계로서, 특히 백색 LED광원의 경우 백열전구(15 lm/W)에 비해 3배 이상의 높은 효율(47.71m/W)을 보였고, 배광측정에서는 78.7%의 효율로 나타났다. 현재 LED광원은 MR16이나 베이스 타입 등의 형태로 제작하여 스탠드, 복도등, 비상유도등, 침실용 등의 용도에 사용되고, 일부는 LED의 원형이나 면(flat)타입으로 가로등이나 투광등으로도 활용되고 있다. 따라서 이들에 대한 각각의 특성들을 제시해 둘 필요성인 인지되어 국내 최초로 개발된 R/G/B/W 8W급 LED광원에 대한 기본적인 광특성 결과를 얻었으며, 이중에서 HB 백색 LED램프의 색도좌표 값을 얻어 CIE표준광과의 색도좌표(x, y) 위치를 비교 검토할 수 가 있었다.