• 제목/요약/키워드: $\Phi$

검색결과 2,268건 처리시간 0.025초

Effects of SPS Mold on the Properties of Sintered and Simulated SiC-ZrB2 Composites

  • Lee, Jung-Hoon;Kim, In-Yong;Kang, Myeong-Kyun;Jeon, Jun-Soo;Lee, Seung-Hoon;Jeon, An-Gyun;Shin, Yong-Deok
    • Journal of Electrical Engineering and Technology
    • /
    • 제8권6호
    • /
    • pp.1474-1480
    • /
    • 2013
  • Silicon carbide (SiC)-zirconium diboride ($ZrB_2$) composites were prepared by subjecting a 60:40 vol% mixture of ${\beta}$-SiC powder and $ZrB_2$ matrix to spark plasma sintering (SPS) in 15 $mm{\Phi}$ and 20 $mm{\Phi}$ molds. The 15 $mm{\Phi}$ and 20 $mm{\Phi}$ compacts were sintered for 60 sec at $1500^{\circ}C$ under a uniaxial pressure of 50 MPa and argon atmosphere. Similar composites were simulated using $Flux^{(R)}$ 3D computer simulation software. The current and power densities of the specimen sections of the simulated SiC-$ZrB_2$ composites were higher than those of the mold sections of the 15 $mm{\Phi}$ and 20 $mm{\Phi}$ mold simulated specimens. Toward the centers of the specimen sections, the current densities in the simulated SiC-$ZrB_2$ composites increased. The power density patterns of the specimen sections of the simulated SiC-$ZrB_2$ composites were nearly identical to their current density patterns. The current densities of the 15 $mm{\Phi}$ mold of the simulated SiC-$ZrB_2$ composites were higher than those of the 20 $mm{\Phi}$ mold in the center of the specimen section. The volume electrical resistivity of the simulated SiC-$ZrB_2$ composite was about 7.72 times lower than those of the graphite mold and the punch section. The power density, 1.4604 $GW/m^3$, of the 15 $mm{\Phi}$ mold of the simulated SiC-$ZrB_2$ composite was higher than that of the 20 $mm{\Phi}$ mold, 1.3832 $GW/m^3$. The $ZrB_2$ distributions in the 20 $mm{\Phi}$ mold in the sintered SiC-$ZrB_2$ composites were more uniform than those of the 15 $mm{\Phi}$ mold on the basis of energy-dispersive spectroscopy (EDS) mapping. The volume electrical resistivity of the 20 $mm{\Phi}$ mold of the sintered SiC-$ZrB_2$ composite, $6.17{\times}10^{-4}{\Omega}cm$, was lower than that of the 15 $mm{\Phi}$ mold, $9.37{\times}10^{-4}{\Omega}{\cdot}cm$, at room temperature.

포화사(飽和砂)의 전단강도(剪斷强度)에 관한 실험적(實驗的) 연구(硏究) (An Experimental Study on Shear Strength of Saturated Sand)

  • 이형수;박용대
    • 대한토목학회논문집
    • /
    • 제9권3호
    • /
    • pp.107-113
    • /
    • 1989
  • 본(本) 연구(硏究)는 일본(日本)의 표준사(標準砂)인 풍포사(豊浦砂) (Toyoura Sand)를 사용(使用)하여 일본대학(日本大學) 이공학부토질실험실(理工學部土質實驗室)에 비치(備置)된 응력(應力)과 변형(變形)의 조건(條件)이 서로 다른 시험장치(試驗裝置) 이용(利用)하여 평면변형시험(平面變形試驗)과 축대칭응력(軸對稱應力) 조건하(條件下)의 삼축압축시험(三軸壓縮試驗)을 실시(實施)하고 이미 조사(調査) 보고(報告)한 바 있는 비트림 단순전단시험(單純剪斷試驗) 결과(結果)와 비교(比較)하여 3차원(三次元) 응력조건하(應力條件下)에서 포화(飽和)된 모래의 전단변형(剪斷變形) 특성(特性)을 검토(檢討)하여 다음과 같은 결론(結論)을 얻었다. 1) 모래의 내부마찰각(內部摩擦角) ${\phi}_d$는 응력변형(應力變形)의 조건(條件)에 관계(關係)없이 구속압(拘束壓)에 반비례(反比例)한다. 이는 같은 밀도(密度)의 모래라도 구속압(拘束壓)이 낮을 수록 체적변화(體積變化)가 크기 때문이다. 2) 같은 밀도(密度)의 모래라도 응력변형(應力變形)의 조건(條件)에 따라 ${\phi}$값이 다르며 ${\phi}_dTS$${\phi}_dPS$${\phi}_dTC$에 비(比)하여 구속압(拘束壓)이 낮을 때 그 영향이 크다. 3) 같은 밀도(密度)와 구속압하(拘束壓下)에서는 ${\phi}_dPS$${\phi}_dTC$ 보다 크고 ${\phi}_dTS$ 보다 작은 값을 나타내는 것을 보아 모래의 전단강도(剪斷强度)는 응력변형(應力變形)의 조건(條件)에 따라 차이가 남을 알 수 있다. 4) 모래의 한계상태(限界狀態)를 나타내는 에너지 소산식(消散式)에 의(依)하면 응력비(應力比)(q/p)와 변형증분비(變形增分比) 관계(關係)는 평면변형시험(平面變形試驗)의 경우 공시체(供試體)의 구속압(拘束壓) 및 밀도(密度)에 관계(關係)없이 동일(同一)한 직선상(直線上)에 존재(存在)한다.

  • PDF

암석물리모델링의 개념과 동해-1 가스전에의 적용 (Concept of Rock Physics Modeling and Application to Donghae-1 Gas Field)

  • 허덕기;김영석
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2008년도 공동학술대회
    • /
    • pp.173-178
    • /
    • 2008
  • 본 연구에서는 탄성물성과 저류물성의 관계를 규명하는 암석물리모델링 방법에 대해 소개하고 이를 동해-1 가스전의 저류층에 응용한 결과를 보고하고자 한다. 시추검층데이터를 이용하여 속도(Vp)와 공극률(\phi) 사이의 관계를 저류층 별로 파악하고, 투수율($\kappa$)과 공극률($\phi$)의 관계를 결합하여 Vp와 $\kappa$의 관계에 대한 연구를 수행하였다. Vp-$\phi$모델의 해석 결과 심부 저류층으로 갈수록 상대적으로 속성정도가 증가하고 분급이 불량함을 알 수 있었다. 또한, 위의 결과를 통해 저류층별로 P파 속도로부터 공극률을 정량적으로 예측 할 수 있는 관계식을 제시하였다. Vp-$\kappa$관계식은 시추검층, 코어실험, 박편을 이용한 투수율 예측 시뮬레이션을 통해 획득한 자료를 이용하여 $\kappa-\phi$의 관계식을 산정한 후 Vp-$\phi$관계식과 결합하여 얻을 수 있었고 이 결과 또한 보고하였다. $\kappa-\phi$관계식은 저류층간의 차이가 없어 하나의 모델로 제시하였으나, Vp-$\phi$ 관계식이 달라 저류층별로 각각 다른 Vp-$\kappa$관계식을 얻을 수 있었다. 본 연구에 사용된 암석물리학적 해석방법은 저류층의 특성해석에 있어서 발생될 수 있는 불확실성을 줄일 수 있고, 탄성파 탐사의 결과로부터 저류물성을 정량적이고 신뢰도 높게 판별 할 수 있는 강력한 도구를 제공할 것으로 기대된다.

  • PDF

GIS내 파티클의 상태에 따른 부분방전 신호의 분석 (The analysis of partial discharge signals according to particle states in GIS)

  • 김경화;이동준;곽희로
    • 조명전기설비학회논문지
    • /
    • 제14권1호
    • /
    • pp.67-74
    • /
    • 2000
  • 본 논문에서는 GIS내 파티클에 의해 발생할 수 있는 절연사고를 미연에 방지하고 또한 파티클의 상태를 파 악하기 위하여 GIS 41 파티클 상태에 따른 부분방전 신호를 측정하고 분석하였다. 본 논문에서는 GIS내 파티콜 의 상태를 4가지(전극부착시, 외함부착시, 스페이서 부착시, 자유운동시)로 모의하였으며, 이때 발생하는 부분방전 신호의 $\Phi$-Q-N 분포를 형태적으로 분석하였다 또한, $\Phi$-Q 분포에 대하여 통계적 연산자를 도입하여 파티 클 상태에 따른 부분방전 신호를 정량적으로 분석하였다. 그 결과 파티클 상태에 따른 $\Phi$-Q-N 분포의 형태적인 분석과 $\Phi$-Q 분포의 정량적인 분석으로 파티콜의 상태 구별이 가능하였다.

  • PDF

유니놈 논리의 확장을 재고함 (An Axiomatic Extension of the Uninorm Logic Revisited)

  • 양은석
    • 논리연구
    • /
    • 제17권2호
    • /
    • pp.323-349
    • /
    • 2014
  • 이 글에서 우리는 보상 없는 강화 (cfr) $(({\phi}&{\psi}){\rightarrow}({\phi}{\wedge}{\psi})){\vee}(({\phi}{\vee}{\psi}){\rightarrow}({\phi}&{\psi}))$를 갖는 유니놈 논리의 확장에 대해 표준 완전성이 제공될 수 있다는 것을 보인다. 이를 위하여, 먼저 보상 없는 강화를 갖는 유니놈 논리 $UL_{cfr}$을 소개한다. 이 체계에 상응하는 대수적 구조를 정의한 후, $UL_{cfr}$이 대수적으로 완전하다는 것을 보인다. 다음으로, $UL_{cfr}$이 표준적으로 완전하다는 것 즉 단위 실수 [0, 1]에서 완전하다는 것을 Yang (2009)에서의 방법을 사용하여 보인다.

  • PDF

CHARACTERIZATIONS OF CENTRALIZERS AND DERIVATIONS ON SOME ALGEBRAS

  • He, Jun;Li, Jiankui;Qian, Wenhua
    • 대한수학회지
    • /
    • 제54권2호
    • /
    • pp.685-696
    • /
    • 2017
  • A linear mapping ${\phi}$ on an algebra $\mathcal{A}$ is called a centralizable mapping at $G{\in}{\mathcal{A}}$ if ${\phi}(AB)={\phi}(A)B= A{\phi}(B)$ for each A and B in $\mathcal{A}$ with AB = G, and ${\phi}$ is called a derivable mapping at $G{\in}{\mathcal{A}}$ if ${\phi}(AB)={\phi}(A)B+A{\phi}(B)$ for each A and B in $\mathcal{A}$ with AB = G. A point G in A is called a full-centralizable point (resp. full-derivable point) if every centralizable (resp. derivable) mapping at G is a centralizer (resp. derivation). We prove that every point in a von Neumann algebra or a triangular algebra is a full-centralizable point. We also prove that a point in a von Neumann algebra is a full-derivable point if and only if its central carrier is the unit.

Near Subtraction Semigroups에 관한 연구 (On Near Subtraction Semigroups)

  • Yon Yong-Ho;Kim Mi-Suk;Kim Mi-Hye
    • 한국콘텐츠학회:학술대회논문집
    • /
    • 한국콘텐츠학회 2003년도 춘계종합학술대회논문집
    • /
    • pp.406-410
    • /
    • 2003
  • B.M. Schen([2])은 함수의 합성 "${\circ}$" 과 차집합 연산 "-"에 대하여 닫혀있는 함수들의 집합 ${\Phi}$에서의 대수적 구조인 subtraction semigroup (${\Phi}$; ${\circ}$,-)를 정의하였다. 이 구조에서 (${\Phi}$; ${\circ}$)는 semgroup, (${\Phi}$; -)는 [1]에서 정의한 subtraction algebra를 이룬다. B.M. Schen은 [2]에서 모든 subtraction semigroup은 invertible function들의 difference semigroup과 동형이라는 사실을 밝혔다. 본 논문에서는 이 subtraction semigroup의 일반화로써 near subtraction semigroupd을 정의하고 이의 한 특수한 형태인 strong near subtraction semigroup의 개념을 정의하여 이들의 일반적인 성질과 ideal의 특성을 조사하고 이들의 응용도를 조사하고자 한다.

  • PDF

Moderately thermostable phage Φ11 Cro repressor has novel DNA-binding capacity and physicochemical properties

  • Das, Malabika;Ganguly, Tridib;Bandhu, Amitava;Mondal, Rajkrishna;Chanda, Palas K.;Jana, Biswanath;Sau, Subrata
    • BMB Reports
    • /
    • 제42권3호
    • /
    • pp.160-165
    • /
    • 2009
  • The temperate Staphylococcus aureus phage ${\Phi}11$ harbors cI and cro repressor genes similar to those of lambdoid phages. Using extremely pure ${\Phi}11$ Cro (the product of the ${\Phi}11$ cro gene) we demonstrated that this protein possesses a single domain structure, forms dimers in solution at micromolar concentrations and maintains a largely $\alpha$-helical structure even at $45^{\circ}C$. ${\Phi}11$ Cro was sensitive to thermolysin at temperatures ranging from $55-75^{\circ}C$ and began to aggregate at ${\sim}63^{\circ}C$, suggesting that the protein is moderately thermostable. Of the three homologous 15-bp operators (O1, O2, and O3) in the ${\Phi}11$ cI-cro intergenic region, ${\Phi}11$ Cro only binds efficiently to O3, which is located upstream of the cI gene. Our comparative analyses indicate that the DNA binding capacity, secondary structure and dimerization efficiency of thermostable ${\Phi}11$ Cro are distinct from those of P22 Cro and $\lambda$ Cro, the best characterized representatives of the two structurally different Cro families.

민간의료보험 활성화에 대한 인식과 그에 영향을 미치는 요인 (Attitude toward the Increasing Role of Private Health Insurance)

  • 박기홍;권순만
    • 보건행정학회지
    • /
    • 제19권1호
    • /
    • pp.62-80
    • /
    • 2009
  • The purpose of this study was to examine the factors influencing the attitude toward the increasing role of private health insurance(PHI). In the Korea Welfare Panel Data 2007, a sample of 1,675 (adjusted by weight value: 1,607) respondents on an opinion on promoting PHI was used in the study. With independent variables including socio-demographic characteristics, health status, health-related behavior, and opinions on welfare service, ordered-probit model was used to analyze the attitude toward PHI. Negative opinion on the increasing role of PHI were responded by 54.6%(n=877) of the respondents, whereas 22.2%(n=373) were positive and 23.2%(n=357) were neutral. Old people, the better off, those with worse self-assessed health status, and those having an experience of health examination tend to have the positive attitude toward the increasing role of PHI. Women, those with chronic diseases or disorders and those who do not agree that comprehensive welfare benefits reduce work incentive showed negative attitude toward PHI. When comparing the needs for PHI before and after medical utilization, ex-ante need tends to strengthen the tendency to support private health insurance. This study will contribute to the discussion on the optimal mix of public and private health insurance in Korea by a better recognition of attitude toward PHI and health care system.

노즐을 적용한 흡기 매니폴드의 배출가스 고찰 (Investigation of the Exhaust gas on the Intake Manifold using Nozzle)

  • 김만재;김태중;최병기
    • 공학기술논문지
    • /
    • 제11권4호
    • /
    • pp.253-257
    • /
    • 2018
  • Exhaust gas from the combustion of automobiles adversely affects the human body and even pollutes the atmosphere. This study investigated the influence of exhaust gas change on intake manifold using the nozzle. First, the flow analysis was performed using the 3D flow analysis program. When the nozzle inlet air velocity increased, the average air velocity in the nozzle diameters of ${\Phi}2.5$ and ${\Phi}5$ increased 37.3% and 31.9% respectively at the intake manifold outlet. As the nozzle inlet air velocity increased, the maximum flow rate of air increased to 42.2% and 32.6%, respectively at nozzle diameters of ${\Phi}2.5$ and ${\Phi}5$. In order to verify the analysis results, experiments on the exhaust gas were performed in the engine simulation system. As the nozzle inlet velocity increased, HC values decreased by 42.4% and 31.4% at nozzle diameters of ${\Phi}2.5$ and ${\Phi}5$, respectively. And CO values decreased by 40.7% and 31.1% at nozzle diameters of ${\Phi}2.5$ and ${\Phi}5$.