• Korean Journal of Poultry Science
• /
• v.18 no.2
• /
• pp.97-119
• /
• 1991

Effect of Streptococcus faecium(SF) and an antibiotic, Colistin(Col), supplemented to diets singly or in combination, on the performances and changes of intestinal population of microflora of broiler chicks studied. A total of 252, day-old chicks(Arbor Acre) of mixed sex(M：F＝1：1) were alloted into six groups. A diet with no Col and SF was referred as a control diet. The basal diets were added with two levels of SF, 0.04 and 0.08%, singly or in combination with Col 10ppm Another diet was prepared by adding only Col 10 ppm. Numbers of the microorganism in diets added with SF 0.04% and 0.08% were 7$\times$10$^{4}$ and 1.4$\times$10$^{5}$ /g diet respectively The diets consisting of corn and soybean meal as major ingredients were fed for a period of seven weeks . During the feeding trial, fresh excreta were sampled at the end of every week in a sterilized condition to count microbial changes from each dietary group. Microbial changes of large intestine were also measured from nine birds sacrificed at the end of the 4th and 7th weeks each time per dietary group. Excreta from all the groups were also collected quantitatively at the end of 3rd and 6th weeks to measure digestibility of the diets, At the end of 7th week, nine birds from each group were also sacrificed to measure weight changes of gastrointestinal tracts . Average body weight gains of broilers fed the diets added with SF 0.08% (2.37kg) or SF 0. 08%+col 10ppm(2.34kg) were significantly larger than that of the control(2.18kg). The weight gains of the other groups were not statistically different from that of the control Feed/gain ratios of the supplemental groups were better than that of control (P＜0.05) except that of birds fed the diet added only with SF 0.04%. Digestibilities of nutrients such as dry matter, crude protein, crude fat and total carbohydrates were not altered by the consumption of the diets added with SF and/or Col throughout the whole feeding period. As expected, the numbers of Streptococci in the excreta from birds fed diets added with SF increased significantly with a statistical difference between groups with SF 0.04% and SF 0.08% most of the time. However. addition of Colistin to the diets supplemented with SF did not give any effects on the number of the microorganism. Numbers of coliforms in the excreta were apparently reduced by feeding the diets added with SF and/or Col(P＜0.05). There were, however, no additive effects observed between the two feed additives in this regard when supplementing Col to the SF diets. Distributions of intestinal microflora exhibited exactly the same pattern as those of the excreta. Length of small intestine of the birds fed diets added with SF 0.08% with or without Col 10 ppm became significantly longer with a range of about 10% than those of the birds fed diets without SF. However, the empty weight of the small inestine of the former group was lighter than that of control These changes resulted in a significant reduction in weight/unit length of the intestine of the birds fed diets supplemented with Col and SF singly or in combination. In overall conclusion, diet added with SF 0.08% appeared most effective in improving broiler performances. Colistin added at a level of 10ppm was not beneficial at all in itself or in combination with SF in terms of broiler performances or changes of intestinal microflora population. The efficacy of SF and Col could be attributed to the changes of wall thickness of the small intestine.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.3
• /
• pp.746-763
• /
• 1996

An alternative design to conventional class II cavity preparation for proximal carious lesions is the tunnel preparation. It preserves the marginal ridge intact, thus making it possible to maintain the natural contact relationship with the adjacent tooth and minimize tooth reduction. This in vitro study was purposed to evaluate the effect of the materials' elastic constants and shear-bond strength on the marginal ridge fracture resistance of teeth restored by the tunnel technique, and to find the materials of choice for tunnel restorations. $Resinomer^{(R)}$, $Ketac-silver^{(R)}$, $Miracle-Mix^{(R)}$, and Tytin were used as restorative material. The elastic constants of each restorative material were evaluated by ultrasonic pulse measurement. Young's modulus and bulk modulus of the restorative materials were evaluated in three specimens for each material type. The shear-bond strength of the restorative materials to the dentin surface was measured after thermocycling 400 times between 6 and $60^{\circ}C$, using ten specimens for each material type. For measuring marginal ridge strength, 60 sound extracted molar teeth were distributed into six groups by size. Sound molar teeth were used as a Control group and unfilled prepared teeth were grouped as Unrestored. Another four groups were named Resinomer group, Ketac-Silver group, Miracle Mix group, and Tytin group by type of restorative material. Tunnel cavity preparation was done with ' 1/2, 2, and 4 round burs in sequence. Initial access to proximal surface was made through an occlusal access preparation started at least 2mm from the marginal ridge, and the proximal opening was formed about 2.5mm below the marginal ridge. After restoration and thermocycling, marginal ridge strength was measured using a universal testing machine. The results were as follows: 1. The Young's modulus of $Tytin^{(R)}$ was 63.95 GPa, followed by $Ketac-Silver^{(R)}$ 27.60 GPa, $Miracle-mix^{(R)}$ 18.48 GPa, and $Resinomer^{(R)}$ 10.74 GPa showing significant differences between the groups(P<0.05). The bulk modulus of the materials showed the same order as Young's modulus. The value of $Tytin^{(R)}$ showed 59.57 GPa indicating that it will deform less than other materials under the same stress. It was followed by $Ketac-Silver^{(R)}$ 23.57 GPa, Miracle $Mix^{(R)}$ 12.50 GPa, and $Resinomer^{(R)}$ 11.60 GPa. 2. The Resinomer group had a shear-bond strength of 7.41 MPa which was significantly higher than those of the Ketac-Silver group (1.80 MPa) and the Miracle Mix group (2.84 MPa) (P<0.01). All the specimens of Tytin group detatched from the dentin surface during thermocycling. 3. The mean marginal ridge strength of the Unrestored group(46.14 kgf) was significantly lower than that of the Control group (84.24 kgf) (P<0.01). The marginal ridge strength of teeth restored by the tunnel technique was, in order, Ketac-Silver group 74.06 kgf, Miracle Mix group 73.36 kgf, Resinomer group 63.47 kgf, and Tytin group 58.76 kgf. The Ketac-Silver, Miracle Mix, and Resinomer groups showed no significant difference with the Control group (P>0.05), but the Tytin group showed significantly lower strength compared to the Control group(P<0.05). The results showed that the marginal ridge strength of the teeth restored by the tunnel technique was not significantly lower than that of sound teeth. They also demonstrated that the bonding strength of the restorative material to the tooth surface should be high and the modulus of elasticity should not be lower than that of the tooth in order to restore the marginal ridge strength to its natural condition.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.4
• /
• pp.336-341
• /
• 2002

This experiment was conducted to evaluate the lysine cell mass (LCM) as a dietary fish meal (EM) protein replacer in juvenile Israeli carp, Cyprinus carpio. Fishmeal, a major animal protein source in the control diet, was replaced by tCM on the protein equivalent base, Fish averaging 1,7 $\pm$ 0.1 g (Mean $\pm$ SD) fed one of nine diets containing isonitrogenous and isocaloric basis of $38\%$ crude protein and 15.2 kJ available energy/g diet: control, $100\%$ $FM; LCM_20$, $80\%$ $FM+20\%$ $LCM; LCM_40$, $60\%$ $FM+40\%$ $LCM; LCM_60$, $40\%$ $FM+60\%$ $LCM; LCM_100$, $100\%$ $LCM; LCM_20$l, $80\%$ $FM+20\%$ $LCM+0.07\%$ $Lysine; LCM_40$l, $60\%$ $FM+40\%$ $LCM+0.14\%$ $Lysine; LCM_60$l $40\%$ $FM+60\%$ $LCM+0.22\%$ Lysine; LCM_100l, $100\%$ LCM+$0.35\% Lysine. After 6 weeks of feeding trial there was no significant difference in weight gain (WG), feed efficiency (FE), protein efficiency ratio (PER) and specific growth rate (SGR) among fish fed control and $LCM_20$ (P>0.05), while fish fed $LCM_40,\;LCM_60,\;LCM_100,\;LCM_40l,\;LCM_60l\;and\;LCM_100l$ diets had a significantly lower WG, FE, PER and SGR than did fish fed control diet (P<0.05). There was no significant difference in WG, PER and SGR among fish fed control and $LCM_20$l diets (P>0.05), while fish fed $LCM_20$l S had a significantly lower FE than did fish fed control diet (P<0.05). No significant difference was observed in hematocrit and condition facto, among fish fed nine diets (P>0.05). Therefore, these results indicated that LCM could replace FM up to $20\%$ and dietary synthetic lysine supplementation did not show any positive growth effects in juvenile Israeli carp.

• Journal of Energy Engineering
• /
• v.8 no.2
• /
• pp.224-232
• /
• 1999

Latent heat storage system using micro-encapsuled phase change material is effective method for floor heating of house and building. The temperature profile in capsule block and flow rate of hot water are important parameters for the development of heat storage system. In the present study, a mathematical model based on 3-D, non-steady state, Navier-Stokes equations, scalar conservation equations and turbulence model ($\kappa$-$\varepsilon$), is used to predict the temperature profiles in capsule and the velocity vectors in hot water pipe. The multi-block grids and fine grids embedding are used to join the circle in hot water pipe and square in capsule block. The phase change process of the capsule is quite complex not only because the size of phase change material is very small, but also because phase change material is mixed with the cement to form thermal storage block. In calculation, it's assumed that the phenomena of phase change is limited only the thermal properties of phase change material and the change of boundary is not happened in capsule. The purpose of this study is to calculate the temperature profiles in capsule block and velocity vectors in hot water pipe using the numerical calculation. Two kinds of thermal boundary condition were considered, the first (case 1) is the adiabatic condition for the both outside surfaces of the wall, the second (case 2) is the case in which one surface is natural convection with atmosphere and another surface is adaibatic. Calculation results are shown that the temperature profile in capsule block for case 1 is higher than that for case 2 due to less heat loss in adaibatic surface. Specially, in the domain of near Y=0, the difference of temperature is greater in case 1 than in case 2. The detailed experimental data of capsule block on the temperature profile and the thermal properties such as specific heat and coefficient of heat transfer with the various temperature are required to predict more exact phenomena of heat transfer.

• Journal of Animal Reproduction and Biotechnology
• /
• v.35 no.2
• /
• pp.190-197
• /
• 2020

The effects of the number of frozen-thawed ram sperm per single and double intra-cervical artificial insemination (AI) on fertility in ewes were studied. A total of 89 non-pregnant ewes were synchronized for oestrus with two doses of 100 ㎍ PGF_2α (Cloprostenol) 9 days apart. The ewes were randomly assigned to one of four groups; D200 (n = 23; double AI with 200 × 10⁶ sperm), S200 (n = 24; single AI with 200 × 10⁶ sperm), D100 (n = 24; double AI with 100 × 10⁶ sperm) and S100 (n = 18; single AI with 100 × 10⁶ sperm). Ewes were inseminated within 12 to 18 h for single AI and, within 10 to 12 h and 16 to 18 h for double AI after the onset of oestrus. The onset of oestrus ranged from 28 to 76 h (54.33 ± 1.28 h). The high percentage (29.2%) of ewes showed oestrus between 51 to 60 h. The non-return rates were highest in group D200 (56.5%) and differed significantly (p < 0.05) from group S100 (11.1%). No ewes were pregnant in group S100, and the pregnancy rates among the remaining groups did not differ. The mean gestation period was 152.8 ± 0.5 days and no difference was observed among the groups. The lambing and multiple birth rates were 100% in group D200. The single and twin lambing was highest in group D100 (33.3%) and group D200 (83.3%), respectively. Only one triplet lambing and the highest lambing size (2.2 ± 0.2) was recorded in group D200. In conclusion, double AI with 200 × 10⁶ sperm showed comparatively most practical for achieving high pregnancy rates and lambing performances in Bangladeshi ewes under field conditions.

• Ecology and Resilient Infrastructure
• /
• v.1 no.1
• /
• pp.39-48
• /
• 2014

In order to establish fundamental data for stream restoration and environmental flow, we investigated optimal ecological flowrate (OEF) and riverine health condition in the Chogang Stream, a tributary to Geum River, Korea. The number of fish individuals sampled in this period were 4,669 in 36 species of 9 families. The most abundant species was Korean chub (Zacco koreanus, 34.0%) followed by pale chub (Z. platypus, 22.6%) and Korean shinner (Coreoleuciscus splendidus, 13.3%). Index of biological integrity (IBI) and qualitative habitat evaluation index (QHEI) values decreased from upstream to downstream along the stream. The estimated IBI value ranged from 27.9 to 38.6 with average 32.2 out of 50, rendering the site ecologically fair to good health conditions. OEF was estimated by the physical habitat simulation system (PHABSIM) using the habitat suitability indexes (HSI) of three fish species Z. koreanus, C. splendidus and Pseudopungtungia nigra selected as indicator species. In Z. koreanus, HSI for flow velocity and water depth were estimated at 0.1 to 0.4 m/s and 0.2 to 0.4 m, respectively. In P. nigra, HSI for flow velocity, water depth and substrate size were estimated at 0.2 to 0.5 m/s and 0.4 to 0.6 m and fine gravel to cobbles, respectively. OEF values increasing from up to downstream was found to increase, weighted usable area (WUA) values increased accordingly.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.1-26
• /
• 1993

The purpose of this study was to investigate the effect of acid etching on the surface appearance and fracture toughness of five glass ionomer cements. Five kinds of commercially available glass ionomer cements including chemical curing filling type, chemical curing lining type, chemical curing metal reinforced type, light curing tilling type and light curing lining type were used for this study. The specimens for SEM study were fabricated by treating each glass ionomer cement with either visible light curing or self curing after being inserted into a rubber mold (diameter 4mm, depth 1mm). Some of the specimens were etched with 37% phosphoric acid for 0, 15, 30, 60, go seconds, at 5 minutes, 1 hour and 1 day after mixing of powder and liquid. Unetched ones comprised the control group and the others were the experimental groups. The surface texture was examined by using scanning electron microscope at 20 kV. (S-2300, Hitachi Co., Japan). The specimens for fracture toughness were fabricated by curing of each glass ionomer cement previously inserted into a metal mold for the single edge notch specimen according to the ASTME399. They were subjected to a three-point bend test after etching for 0, 30, 60, and 90 seconds at 5 minutes-, 1 hour-and 1 day-lapse after the fabrication of the specimens. The plane strain fracture toughness ($K_{IC}$) was determined by three-point bend test which was conducted with cross-head speed of 0.5 mm/min using Instron universal testing machine (Model No. 1122) following seven days storage of the etched specimens under $37^{\circ}C$, 100% humidity condition. Following conclusions were drawn. 1. In unetched control group, crack was present, but the surface was generally smooth. 2. Deterioration of the surface appearance such as serious dissolving of gel matrix and loss of glass particles occured as the etching time was increased beyond 15 s following Immediate etching of chemical curing type of glass ionomer cements. 3. Etching after 1 h, and 1 d reduced surface damage, 15 s, and 30s etch gave rough surface appearance without loss of glass particle of chemical curing type of glass ionomer cements. 4. Light curing type glass ionomer cement was etched by acid, but there was no difference in surface appearances according to various waiting periods. 5. It was found that the value of plane stram fracture toughness of glass ionomer cements was highest in the light curing filling type as $1.79\;MNm^{-1.5}$ followed by the light curing lining type, chemical curing metal reinforced type, chemical curing filling type and chemical curing lining type. 6. The value of plane stram fracture toughness of the chemical curing lining type glass ionomer cement etched after 5 minutes was lower than those of the cement etched after 1 hour or day or unetched (P < 0.05). 7. Light curing glass ionomer cement showed Irregular fractured surface and chemical curing cement showed smooth fractured surface.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.8
• /
• pp.895-903
• /
• 2007

As for the increasing demanding on the development of direct-ecological landfill monitoring methods, it is needed for critically defining the condition of landfills and their influence on the environment, quantifying the amount of enzymes and bacteria mainly concerned with biochemical reaction in the landfills. This study was thus conducted to understand the fates of contaminants in association with groundwater quality parameters. For the study, groundwater was seasonally sampled from four closed unsanitary landfills(i.e. Cheonan(C), Wonju(W), Nonsan(N), Pyeongtaek(P) sites) in which microbial diversity was simultaneously obtained by 16S rDNA methods. Subsequently, a number of primer sets were prepared for quantifying the specific gene of representative bacteria and the gene of encoding enzymes dominantly found in the landfills. The relationship between water quality parameters and gene quantification were compared based on correlation factors. Correlation between DSR(Sulfate reduction bacteria) gene and BOD(Biochemical Oxygen Demand) was greater than 0.8 while NSR(Nitrification bacteria-Nitrospira sp.) gene and nitrate were related more than 0.9. A stabilization indicator(BOD/COD) and MTOT(Methane Oxidation bacteria), MCR(Methyl coenzyme M reductase), Dde(Dechloromonas denitrificans) genes were correlated over 0.8, but ferric iron and Fli(Ferribacterium limineticm) gene were at the lowest of 0.7. For MTOT, it was at the highest related at 100% over BOD/COD. In addition, anaerobic genes(i.e., nirS-Nitrite reductase, MCR. Dde, DSR) and DO were also related more than 0.8, which showing anaerobic reactions generally dependant upon DO. As demonstrated in the study, molecular biological investigation and water quality parameters are highly co-linked, so that quantitative real-time PCR could be cooperatively used for assessing landfill stabilization in association with the conventional monitoring parameters.

• Korean Journal of Medicinal Crop Science
• /
• v.1 no.2
• /
• pp.137-157
• /
• 1993

This study was carried out to investigate the optimal condition for multiple propagation through leaf tissue culture and to apply anther culture techniques to Pulsatilla koreana Nakai breeding. Leaf and anther of Pulsatilla koreana Nakai were cultured on MS, MT, LS and $B_5$ media supplemented with several growth regulators and nitrogen sources under various conditions. For callus induction and differentiation from the Pulsatilla koreana leaf segments were more effective in the combination of zeatin and auxin than auxin alone. The color of the callus was green when treated with IBA alone. Shoot differentiation was more effective when treated with zeatin than auxin alone, especially the best hormoal combination for shoot differentiation was zeatin 1.0mg/l +NAA 0.1mg/l, while 2,4-D inhibited shoot differentiation. The appeared rate of S pollen was 35% in vivo, while that of S pollen by low temperature$(4^{\circ}C)$ pretreatment for 4 days was increased by 53% and the optimum culture time for callus induction from anther was uni-nucleate stage. $B_5$ basal medium supplemented with NAA 0.5mg/l and zeatin 1 mg/l was the most effective on callus formation and the best results of plant regeneration were obtained from combination of NAA 0.5mg/l and zeatin 0.5mg/l in anther culture. $NH_{4}NO_3$ as more effectives as the nitrogen source than $KNO_3$ and the combination with zeatin 2.0mg /L was the best effective. The best combination for plant regeneration in callus induced from anther was $NH_{4}NO_3$ 1650mg/l + $KNO_3$ 3800mg/l + zeatin 2.0mg/l. Ploidy level of anther-derived plants appeared 28% haploid, 47% diploid and the others were triploid, tetraploid and mixploid. In compare with E.S.T, M.D.H and P.X banding patterns were distinguished among callus, haploid and diploid plants in electrophoresis.

• Weed & Turfgrass Science
• /
• v.2 no.1
• /
• pp.38-46
• /
• 2013

With increasing environmental issues from synthetic chemical herbicides, microbe-originated herbicides could be a fascinating alternative in current agriculture. We isolated Streptomyces strains that produced herbicidal active metabolite(s) against a grass weed Digitaria sanguinalis. According to the result from 16S rDNA sequence comparison with the close strains, the best isolate (Code name MS-80673) was identified as Streptomyces scopuliridis KR-001. The closest type strain was Streptomyces scopuliridis RB72 which was previously reported as a bacteriocin producer. The optimal culture condition of S. scopuliridis KR-001 was $28^{\circ}C$, pH 7.0 and culture period 4 to7 days. Both of soil and foliar application of the crude culture broth concentrate was effective on several troublesome or noxious weed species such as a Sciyos angulatus in a greenhouse and field condition. Phytotoxic symptoms of the culture broth concentrate of S. scopuliridis KR-001 by foliar application were wilting and burndown of leaves, and stems followed by discoloration and finally plant death. In crops such as rice, wheat, barley, hot pepper and tomato, growth inhibition was observed. These results suggest that the new S. scopuliridis KR-001 strain producing herbicidal metabolites may be a new bio-herbicide candidate and/or may provide a new lead molecule for a more efficient herbicide.