• Journal of Magnetics
• /
• 제9권4호
• /
• pp.101-104
• /
• 2004

The crystallization behaviours of nanocomposite made by a function of quenching rate (roller speed) were studied. The results showed that there was one step c$\mathbb{r}$ystallization process for the alloy quenched at roller speed of 32 m/s, which could be shown as, Am (amorphouse) + ${\alpha}-Fe/Nd_2Fe_{14}B$ ${\rightarrow}$ ${\alpha}-Fe/Nd_2Fe_{14}B$ . For the alloy quenched at roller speed of 40 m/s, there was steps crystallization process taking place at different temperatures, which could be shown as, Am ${\rightarrow}$ ${\alpha}-Fe/Nd_2Fe_{23}B_3+Nd_2Fe_{14}B+Am`$ ${\rightarrow}$ ${\alpha}-Fe/Nd_2Fe_{14}B$. The presence of transition phase ($Nd_2Fe_{23}B_3$) was harmful to get fine and uniform grain size during crystallization process. Uniform microstructures and high magnetic properties could be attained for the as-quenched alloy containing less amorphous phase and no presence of transition phase during annealing treatment. For the alloy prepared at roller speed of 32 m/s, the following properties were obtained, $B_r= 0.904 T,_iH_c = 801 kA/m, (BH)_{max} = 122 kJ/m^3 and M_r/M_s = 0.6$.

• 한국세라믹학회지
• /
• 제28권12호
• /
• pp.996-1004
• /
• 1991

In this study, we tried to synthesis iron hydroxide suitable for longitudinal magnetic recording media from waste acid, which is a by-product of an iron works factory. Effects of initial pH of reactants, reaction temperature, reaction time for the synthesis of acicular iron hydroxide were studied in relation to particle properties of iron hydroxide and magnetic properties of maghemite powders. As the pH in reactant solution increased, $\beta$-FeOOH(pH=4.5), mixture of $\beta$-FeOOH and $\alpha$-FeOOH(4.5$\alpha$-FeOOH and Fe3O4(6.4$\alpha$-FeOOH (pH>13) was found to from in order. Especially, $\alpha$-FeOOH formed above pH 13 was single phase with superior acicularity. The temperature range over which the single-phase goethite can be formed increased as the initial pH of reactants increased (pH 13:10~5$0^{\circ}C$, pH 13.2:10~7$0^{\circ}C$, pH 13.5:0~8$0^{\circ}C$). The goethite formed between 40~6$0^{\circ}C$ has superior characteristics because the acicularity increased with increasing temperature but at high temperature (>6$0^{\circ}C$) Fe3O4 (pH=13) was found to start to form. Generally, single phase of goethite was found to form after one hour when an optimized condition. The particle size of goethite did not change as the reaction time increased over one hour. Accordingly, the magnetic properties of ${\gamma}$-Fe2O3 produced from goethite were not altered.

• 한국자기학회지
• /
• 제7권1호
• /
• pp.44-48
• /
• 1997

약 30 nm의 미세결정립으로 구성된 ( .alpha. -Fe)-(Nd$_{2}$Fe$_{14}$B$_{1}$)형 저 Nd함유 Nd-Fe-B계 합금이 급속응고법으로 제조된 비정질상으로 부터 결정화하여 제조되었다. Nd$_{4}$Fe$_{82}$B$_{10}$Mo$_{3}$Cu$_{1}$ 조성에 Ga의 첨가는 각형성 개선효과와 함께 잔류자화를 1.29 T까지 증가시킨다. Nd의 함유량을 증가시킨 초미세결정립 Nd$_{5}$Fe$_{81}$B$_{9}$Mo$_{3}$Cu$_{1}$Ga$_{1}$ 합금의 Nd$_{2}$Fe$_{81}$B$_{9}$Mo$_{3}$Cu$_{1}$Ga$_{1}$ 합금의 잔류자화, 보자력 및 최대자기에너지적은 각각 1.24 T, 257.4 kA/m(3.23 kOe), and 100.3 kJ/m$^{3}$(12.6 MGOe)이다.다.

• Corrosion Science and Technology
• /
• 제2권1호
• /
• pp.18-25
• /
• 2003

Effects of the precipitation of $\sigma$ phase on the metastable pitting as a precursor of stable pitting corrosion and also on the progress of stale pitting of the 25Cr-7Ni-3Mo-0.25N duplex stainless steel were investigated in chloride solution. Electrochemical potential and current noises of the alloy were measured in 10 % ferric chloride solution ($FeCl_3$) with zero resistance ammeter (ZRA), and then analyzed by power spectral density (PSD) and by corrosion admittance ($A_c$) spectrum. With aging at $850^{\circ}C$, the passive film of the alloy was found to get significantly unstable as represented by power spectral density (PSD) and a transition from metastable pitting state to stable one was observed. In the corrosion admittance spectrum, the number of negative $A_c$ corresponding to the state of localized corrosion increased with aging, suggesting that the precipitation of $\sigma$ phase considerably degraded the passive film by depleting Cr and Mo around it at $\alpha/\sigma$ or $\gamma/\sigma$ phase boundaries, thereby leading to the initiation of the pitting corrosion. However, the Cr and Mo at $\alpha/\sigma$ or $\gamma/\sigma$ phase boundaries which were once depleted due to the precipitation of the $\sigma$ phase were partly replenished by the diffusion of Cr and Mo from the surrounding matrix with aging time longer. The initiation of pitting seems to be associated with the precipitation density of the $\sigma$ phase with an effective size needed to induce the sufficient depletion of Cr and Mo around it.

• Journal of Magnetics
• /
• 제6권4호
• /
• pp.122-125
• /
• 2001

Phase relationships of the HDDR (hydrogenation, disproportionation, desorption and recombination)-treated Sm$_3$(Fe,M)$_{29}$-type alloy with chemical composition of Sm$_{9}$Fe$_{65}$ $Co_{20}$V$_{6}$ were studied by X-ray diffraction (XRD) and by thermomagnetic analysis (TMA). The alloy was disproportionated into a mixture of $SmH_{x}$ and $\alpha$-Fe at high temperature under hydrogen gas. The disproportionated material was recombined into a mixture of Sm-(Fe,M) (M = Co and/or V) and $\alpha$-Fe phases. The structure of the Sm-(Fe,M) phase was dependent upon the recombination conditions, and a detailed phase diagram showing the phase relationships in the HDDR-treated alloy has been established. The Sm-(Fe,M) phase in material recombined above $900^{\circ}C$ had the $Sm_2Fe_{17}$-type structure, and it exhibited the $SmFe_{7}$-type structure when recombined at temperatures ranging from $700^{\circ}C$ to $850^{\circ}C$. Recombination below $650^{\circ}C$ led to the $SmFe_3$-type structure of the Sm-(Fe,M) phase. Curie temperatures of the Sm-(Fe,M) phases in the recombined material were significantly higher than those of the corresponding stoichiometric phases. It was suggested that the chemical composition of the Sm-(Fe,M) phases may be significantly different from that of the corresponding stoichiometric phases. All the HDDR-treated $Sm_{9}Fe_{65}Co_{20}V_{6}$ materials showed the soft magnetic features regardless of the phase constitution.n.

• Corrosion Science and Technology
• /
• 제13권2호
• /
• pp.70-80
• /
• 2014

Duplex stainless steels with nearly equal fraction of the ferrite(${\alpha}$) phase and austenite(${\gamma}$) phase have been increasingly used for various applications such as power plants, desalination facilities due to their high resistance to corrosion, good weldability, and excellent mechanical properties. Hyper duplex stainless steel (HDSS) is defined as the future duplex stainless steel with a pitting resistance equivalent (PRE=wt.%Cr+3.3(wt.%Mo+0.5wt.%W)+30wt.%N) of above 50. However, when HDSS is welded with gas tungsten arc (GTA), incorporation of nitrogen in the Ar shielding gas are very important because the volume fraction of ${\alpha}$-phase and ${\gamma}$-phase is changed and harmful secondary phases can be formed in the welded zone. In other words, the balance of corrosion resistance between two phases and reduction of $Cr_2N$ are the key points of this study. The primary results of this study are as follows. The addition of $N_2$ to the Ar shielding gas provides phase balance under weld-cooling conditions and increases the transformation temperature of the ${\alpha}$-phase to ${\gamma}$-phase, increasing the fraction of ${\gamma}$-phase as well as decreasing the precipitation of $Cr_2N$. In the anodic polarization test, the addition of nitrogen gas in the Ar shielding gas improved values of the electrochemical parameters, compared to the Pure Ar. Also, in the erosion-corrosion test, the HDSS welded with shielding gas containing $N_2$ decreased the weight loss, compared to HDSS welded with the Ar pure gas. This result showed the resistance of erosion-corrosion was increased due to increasing the fraction of ${\gamma}$-phase and the stability of passive film according to the addition $N_2$ gas to the Ar shielding gas. As a result, the addition of nitrogen gas to the shielding gas improved the resistance of erosion-corrosion.

• 보존과학회지
• /
• 제30권4호
• /
• pp.417-425
• /
• 2014

구리에 다양한 비율의 주석을 혼합하여 청동합금을 제작하고 합금 비율에 따른 색도 변화를 분석하였다. 색도를 미세조직의 변화와 함께 분석한 결과, Cu-Sn 청동은 주석함량이 높아질수록 적 황색도를 나타내는 $a^*$와 $b^*$값은 감소하며 전체적인 백색도가 크게 증가하였다. 하지만 백색도와 밀접한 $L^*$값이 감소하는 특이한 현상을 보였다. Cu-Sn 청동의 미세조직 내에서 존재하는 ${\alpha}$상의 비율이 증가될수록 적 황색도가 높아졌고, ${\delta}$상의 비율이 증가할수록 $a^*$와 $b^*$값이 낮아졌다. 한편 동일한 성분 조성을 가진 Cu-22% Sn 청동을 다양한 열처리 조건으로 상변화를 일으킬 경우 주조 조직인 ${\alpha}+{\delta}$상과 담금질 조직인 ${\alpha}+{\gamma}$상, ${\alpha}+{\beta}$상에서 미세한 색도변화가 일어났다. 이는 동일한 조성의 합금도 다른 분율을 가진 미세조직을 생성시킴에 따라 색상 변화가 생길 수 있음을 보여준다. Cu-Sn 청동을 담금질할 경우, 합금 내에서의 미세조직 변화에 따른 적 황색도는 ${\alpha}$상, ${\beta}$상, ${\gamma}$상, ${\delta}$상의 순으로 감소하였다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권17호
• /
• pp.7555-7559
• /
• 2015

Background: CML includes 30% of all leukemias, and occurs from childhood to old age. The present study was a retrospective analysis of chronic phase CML patients registered to a Hematology Clinic in Kermanshah, Iran, with checking of treatment options. Materials and Methods: Between 2002 and 2014, 85 CML patients referred to our hematology clinic were enrolled in our study. We surveyed age, sex, B-symptoms, splenomegaly, Sokal score, Hasford score, treatment and survival in all patients. Philadelphia chromosome analysis was conducted for each patient by conventional cytogenetics. We compared treatment in the patients with three drugs, imatinib, hydroxyurea (HU) and interferon alpha (IFN-${\alpha}$). Results: The mean age of the patients at diagnosis was $47.5{\pm}14.5years$ (range, 23-82 years), with 43 (50.6%) being male. Some 13 (15.3%) were referred to our clinic for the first time with B-symptoms and 44 patients (51.8%) had splenomegaly. The Sokal score for 77 (90.6%) was low, 4 (4.7%) was intermediate and 4(4.7%) was high, but Hasford (Euro) scores for all patients were low. The 5-year survival rate for treated patients with imatinib, imatinib plus HU and imatinib plus HU plus IFN-${\alpha}$ was 90.5%, 81.1% and 55.6%, respectively Conclusions: The results show that imatinib therapy alone provides better survival in CML patients compared to HU or IFN-${\alpha}$. Combinations of IFN-${\alpha}$ and/or HU with imatinib probably reduce survival.

• 한국전기전자재료학회논문지
• /
• 제31권6호
• /
• pp.357-361
• /
• 2018

We demonstrated a crack-free ${\alpha}-Ga_2O_3$ on sapphire substrate by horizontal halide vapor phase epitaxy (HVPE). Oxygen-and gallium chloride-synthesized Ga metal and HCl were used as the precursors, and $N_2$ was used as the carrier gas. The HCl flow and growth temperature were controlled in the ranges of 10~30 sccm and $450{\sim}490^{\circ}C$, respectively. The surface of ${\alpha}-Ga_2O_3$ template grown at $470^{\circ}C$ was flat and the root-mean-square (RMS) roughness was ~2 nm. The full width at half maximum (FWHM) values for the symmetric-plane diffractions, were as small as 50 arcsec and those for the asymmetric-plane diffractions were as high as 1,800 arcsec. The crystal quality of ${\alpha}-Ga_2O_3$ on sapphire can be controlled by varying the HCl flow rate and growth temperature.

• Journal of Mechanical Science and Technology
• /
• 제20권1호
• /
• pp.13-18
• /
• 2006

Ti-8Ta-3Nb, as a new biomaterial, was prepared by cast and swaging process. Their deformation behavior of Ti-8Ta-3Nb alloy has been characterized on the basis of its flow stress variation obtained from the true strain rate compression testing in the temperature of $700-900^{\circ}C$ and strain rate of $0.001-10\;s^{-1}$. At the strain rates lower than $0.1\;s^{-1}$ and the all temperature ranges which consist of two phase ${\alpha}+{\beta}$ as well as single ${\beta}$ phase fields, the flow curves show a small degree of flow softening behavior. In contrast, the shapes of the flow curves at other strain rates indicate unstable behavior. The shapes of the flow curves were similar in both as-cast and swaged specimen as well as in both ${\alpha}+{\beta}$ phase and ${\beta}$ phase. The flow stress data did not obey the kinetic rate equation over the entire regime of testing but a good fit has been obtained in the intermediate range of temperatures ($750-850^{\circ}C$). In this range, a stress exponent value of about 7.7 in as-cast specimens and about 6.2 in swaged specimens with an apparent activation energy of about 300 kJ/mol and about 206 kJ/mol respectively have been evaluated.