• Journal of Oriental Neuropsychiatry
• /
• v.19 no.2
• /
• pp.95-110
• /
• 2008

Objective : This experiment was designed to investigate the effects of the PMCMT hot water extract & ultra-fine powder on Alzheimer's Disease Model Induced by ${\beta}A$. Method : The effects of the PMCMT hot water extract on expression of proinf1ammatory cytokine mRNA in BV2 microglial cell cell line treated by lipopolysacchaide(LPS). The effects of the PMCMT hot water extract & ultra-fine powder on (1) the behavior (2) AChE in serum (3) the infarction area of the hippocampus, and brain tissue injury in Alzheimer's diseased mice induced with ${\beta}A$ were investigated. Result : 1. The PMCMT hot water extract suppressed the expression of proinflammatory cytokine mRNA in BV2 microglial cell line treated with LPS. 2. The PMCMT hot water extract & ultra-fine powder a significant inhibitory effect on the memory deficit was shown for the mice with Alzheimer's disease induced by ${\beta}A$ in the Morris water maze experiment, which measured stop-through latency and distance movement-through latency 3. The PMCMT hot water extract & ultra-fine powder suppressed the over-expression of AChE activity in the serum of the mice with Alzheimer's disease induced by ${\beta}A$. 5. The PMCMT ultra-fine powder reduced infarction area of hippocampus significantly, and the PMCMT hot water extract & ultra-fine powder controlled the injury of brain tissue in the mice with Alzheimer's disease induced by ${\beta}A$. Conclusions : These results suggest that the PMCMT hot water extract & ultra-fine powder may be effective for the prevention and treatment of Alzheimer's disease. Investigation into the clinical use of the PMCMT hot water extract & ultra-fine powder for Alzheimer's disease is suggested for future research.

• International Journal of Highway Engineering
• /
• v.17 no.3
• /
• pp.27-33
• /
• 2015

PURPOSES : To ensure appropriate RCC properties with sufficient strength development and workability, it is necessary to secure a proper level of consistency. It is also necessary to secure maximum dry density, which is an important factor for increasing the interaction of aggregate interlocking, leading to an augmentation of RCC strength. On the other hand, the dry density of RCC can be changed owing to the compaction conditions, water content, and particle size distribution. A Proctor test and a modified Proctor test were used for determining the optimum water content needed to achieve maximum dry density with different amounts of compaction energy. A Vebe test, on the other hand, was used for checking the level of consistency, which is important for producing a workable mixture. METHODS : To confirm the degree of compaction at various particle sizes, RCC mixtures with different sand/aggregate ratios were evaluated. The Proctor test and modified Proctor test were applied to these mixtures to check the effect of the aggregate gradation and compaction energy on the maximum dry density and optimum water content. During each test, three specimens were produced for all types of water content under each aggregate gradation. A compaction curve and the optimum water content and maximum dry density for each aggregate gradation were then obtained for both tests. The range of water content for the appropriate consistency of each aggregate gradation was determined through a Vebe test. The optimum water content was then evaluated based on this range. RESULTS : The compaction test results show that the modified Proctor test provides a higher maximum dry density and lower optimum water content compared with the standard Proctor test. For the modified Proctor test, two cases of aggregate gradation (s/a = 30% and 70%) had the optimum water contents outside of the appropriate water content range. For the standard Proctor test, on the other hand, none of aggregate gradations provided the optimum water content within the desired range. CONCLUSIONS : The modified Proctor test should be used for an RCC mixture design because it can provide adequacy between maximum dry density and consistency. Moreover, the compaction roller has become highly developed for higher compaction energy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.257-257
• /
• 2013

In order to selectively remove oil and organic compound from water, silica nanoparticles with hydrophobic coating was used. Since silica nanoparticles are generally hydrophilic, removal efficiency of oil and organic compound, such as toluene, in water can be decreased due to competitive adsorption with water. In order to increase the removal efficiency of oil and toluene, hydrophobic polydimethylsiloxane (PDMS) was coated on silica nanoparticles in the form of thin film. Hydrophobic property of the PDMS-coated silica nanoparticles and hydrophilic silica nanoparticles were easily confirmed by putting it in the water, hydrophilic particle sinks but hydrophobic particle floats. PDMS coated silica nanoparticles were dispersed on a slide glass with epoxy glue on and the water contact angle on the surface was determined to be over $150^{\circ}$, which is called superhydrophobic. FT-IR spectroscopy was used to check the functional group on silica nanoparticle surface before and after PDMS coating. Then, PDMS coated silica nanoparticles were used to selectively remove oil and toluene from water, respectively. It was demonstrated that PDMS coated nanoaprticles selectively aggregates with oil and toluene in the water and floats in the form of gel and this gel remained floating over 7 days. Furthermore, column filled with hydrophobic PDMS coated silica nanoparticles and hydrophilic porous silica was prepared and tested for simultaneous removal of water-soluble and organic pollutant from water. PDMS coated silica nanoparticles have strong resistibility for water and has affinity for oil and organic compound removal. Therefore PDMS-coated silica nanoparticles can be applied in separating oil or organic solvents from water.

• Composite Materials and Engineering
• /
• v.3 no.3
• /
• pp.167-178
• /
• 2021

In the present paper, the destructive behavior of distilled water, salty water, sulfuric acid, and heat on glass/vinyl ester composites was investigated by experimental methods. Hetron 922 vinyl ester resin and two types of mat and woven glass fibers as the reinforcements were used to fabricate composite test samples. All samples were immersed in distilled water, salty water, and sulfuric acid with three different concentrations. The tests were performed at 20℃ and 70℃ for the exposure duration of 1, 2, 4, and 8 weeks. Bending tests were performed after aging for all composite samples to check the degradation of the bending modulus and strength. The results show that the effect of distilled water, in comparison with salty water, on the degradation of composite samples was significant. On the other hand, almost non-sensitivity of concentrations of salty water on the weight gain of specimens has been observed. In addition, it was also observed that the degradation of samples at 70℃ temperature is much more than that of at 20℃. Also, it was observed that the flexural modulus of virgin specimens exposed to salty water (2% concentration) has been recovered just after two weeks of immersion. Furthermore, in some cases, composite samples under the sulfuric acid solution have lost almost 80% of their mechanical properties.

• Journal of Korean Society on Water Environment
• /
• v.39 no.4
• /
• pp.329-342
• /
• 2023

Turbid water and suspended sediment (SS) load are having negative consequences such as water quality degradation and ecological damage, thus necessitating the establishment of management guidelines to reduce their impact. The present work investigates the spatio-temporal distribution of fish species and the effects of turbid water from 2011-2016 in the upper reaches of Soyang-Dam. The family Cyprinidae is the largest population in the study area, among which Zacco platypus and Zacco koreanus are the dominant species. The diversity of species is relatively abundant in the upper watershed, while the seasonal effect on the population distribution remains unclear. Using two main common components of the empirical orthogonal function (EOF) analysis, the distribution characteristics of 27 species at five survey sites are revealed. Zacco koreanus is found to be predominant at the upstream A-Naerincheon, while Zacco platypus and Rhinogobius brunneus are found to be predominant at the upstream B-Bukcheon. Disturbance of an aquatic ecosystem has a relatively greater impact in the downstream, as-compared to the upper area-the high proportion of forest area is decreased whereas that of agricultural and urbanized areas is increased. The patterns of representative species are changed according to the mid- to long-term effects of turbid water and SS. Accordingly, the significant correlation between the SS load and fish distribution EOF analysis indicates that it should be considered as a potential alternative that can overcome the limitations of impact assessment on turbid water to the Fish Assessment Index (FAI). A comprehensive study examining the long-term effects of SS load to the fish ecosystems with a systematic statistical analysis of sufficiently accumulated data at the national level is needed as future research.

• Fashion & Textile Research Journal
• /
• v.19 no.5
• /
• pp.646-652
• /
• 2017

In order to clarify an availability of water treatment for persimmon extract dyeing, effect of color developing by water treatment process on cotton fabrics dyed with persimmon extract was investigated. Dyed fabrics were dipped still water and circulation water in various temperature. Concerning water color developing, still water color developing and circulation water color developing have been examined, and the temperature of water has been apprehended to prepare an effective basis of water color development. The surface color based on circulation water color development displays low values of $a^{\ast}$ and $b^{\ast}$, and the range of the c value(Munsell chroma) is narrow and has the value of 2 to 3, thus displays the coloration of a dark tone. The effect of temperature in water color development was insignificant, due to the small difference in temperature from $20^{\circ}C$ to $40^{\circ}C$. At $80^{\circ}C$, remarkable color development manifested, which is evidence of the high influence of temperature. The effects of circulation were clear at low temperatures, and the effects of temperature highly manifested at high temperatures. Circulation water color development display great color development at all temperatures to allow industrial color development with the absence of sunlight, thereby having an effect of energy reduction and developing color in dark tones, however this also is a strength of persimmon extract concerning color diversification, and is judged to have great value of industrial and practical application.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.10
• /
• pp.556-560
• /
• 2017

This research carried out to evaluate the disadvantage of pre-chlorination and the effect of polyamine as coagulant aids for treating the blooming water with Microcystis sp.. Pre-chlorination on blooming water makes the colony of Microcystis sp. to the smaller size. Coagulation with polyamine advanced treatment efficiency not only turbidity but also particulate matters especially less then $5{\mu}m$ size for the blooming water compared with using alum alone. Particle count was more sensitive than turbidity on water quality management of settlement and filtrate.

• Journal of Korean Society on Water Environment
• /
• v.25 no.6
• /
• pp.902-909
• /
• 2009

With various reservoirs, dams and reduction of water velocity in downstream, rivers in Korea often have characteristics of accumulation of pollutants. Therefore, the main focus of water quality modeling in Korea needs to be shifted from DO to algae and organic matter. Moreover the structures of water quality models should be modified to have capability of simulating BOD which is a key factor of total water pollution load management in Korea as laboratory experiment BOD (Bottle $BOD_5$). In the SWAT model which is one of the widely used water quality models in Korea, the channel water quality module is using main algorithm of the QUAL2E model which has limitations in simulating algae, organic matter and Bottle BOD5 etc. To overcome this hindrance, in this study, the improved channel water quality module of the SWAT model (Q-SWAT) was proposed by linking the algorithms of the QUAL-NIER model which was developed based on the QUAL2E model to the SWAT model. The algorithms estimating the increase of internal organic matter by fractionization algal metabolism process and calculating Bottle $BOD_5$ were added and the results of proposed model were compared to those of the original SWAT model. The results of comparison test are showing that more accurate BOD values can be obtained with the Q-SWAT model and it is anticipated that the Q-SWAT model can be used as an effective tool of decision support through the water quality simulation and long term pollution source analysis.

• Industry Promotion Research
• /
• v.1 no.1
• /
• pp.143-149
• /
• 2016

This study verified the relationship on the perception of water reuse R&D support and water reuse vitalization policy. The study results showed that the perception of water reuse importance and effectiveness positively affected the perception of the necessity of water reuse vitalization policy, necessity of supporting water reuse water-saving product company, necessity of investing water reuse(p<.001). Also, gender, education, occupation, type of residence and monthly water rate significantly affected the between-group differences of the perception of water reuse vitalization policy. This study provided implications for preparing water reuse investment and vitalization policy by the relationship on the perception of water reuse R&D support and water reuse vitalization policy.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.182-182
• /
• 2023

Since China adopted Public Private Partnerships (PPPs) in the 1980s, China has relied on water PPPs to expand appropriate water facilities.. According to the World Bank data from 1994 to 2020, the top five provinces hosted over 40 percent of total PPPs, with four of them located in the Huadong area and one in the Henan area. A vast gap exists between the group attracting the most PPPs and the group hosting the least. This study explores Guangdong and Shandong provinces, which have led most PPPs in China. Coincidently, these areas are also famous for the typical areas to show the Chinese economic policy after the open-door policy. They have achieved economic development and rapid urbanization rates based on the large scale of Foreign Direct Investment inflow and export-oriented manufacturing industry, as well as their active participation in PPPs over the last thirty years. An economic approach can provide valuable insights into the development of water infrastructure. Adequate urban infrastructure has been shown to impact local economic development positively. Water infrastructure also provides a basic and sustainable environment for economic activities by satisfying more water usage, improving the efficiency of the water supply, and reducing water pollution caused by industrial activities. However, it remains only partially understood without inclusive research on the issues related to water resources in each province. For instance, existing studies have been limited to explaining slightly different patterns of water PPPs between Guangdong and Shandong at the beginning of the PPP era. This study aims to elucidate the development pattern of water PPPs in each province from multi-dimensional aspects. Therefore, the study will help understand why China boosted the development of the private water market.