권호 표지

Textile Coloration and Finishing (한국염색가공학회지)

The Korean Society of Dyers and Finishers (ksdf)

  • Quarterly
  • /
  • 1229-0033(pISSN)
  • /
  • 2234-036X(eISSN)

Domain

  • Chemical Engineering ＞ Dyeing and Finishing

Aim & Scope

Textile Coloration and Finishing, the Journal of the Korean Society of Dyers and Finishers, publishes original research on all aspects of coloration, finishing and related textile science and technology, which has not been or is not to be published elsewhere. The editors welcome regular articles, notes, letters, communications, and reviews. Regular articles are comprehensive reports of significant results and should have high scientific quality and originality. Communications should be preliminary reports of unusual urgency and significance. A more complete paper may be published at a later date. A Note deals with a limited subject which requires no further elaboration in the future. Reviews should be short, critical surveys of progress in limited fields of research made in recent years. Textile Coloration and Finishing publishes ISSN print edition(1229-0033) and electronic edition(2234-036X).

http://www.ksdf.or.kr/index.html KSCI KCI

Volume 2 Issue 1

  1. 조승식;심미숙;김운배 1
    PDF
    The cleaning resistance of tanned chrome garment leathers was investigated by using drycleaning solvents. Hydrocarbon, perchloroethylene and fluorocarbon (F-113) were used as solvent. Various test methods, such as color difference test, surface view by scanning electron microscope, mechanical properties measured by KES-FB System and their hand values and wearing abilities are carried out in this study. The results can be obtained as follows: 1. Fluorocarbon type (F-113) was demonstrated a suitable solvent for drycleaning of leather. 2. Perchloroethylene showed the worst in fading and stiffening among three different types of solvents.
  2. 이영희;박준명;김경환 8
    PDF
    The fading of dyed material by light has long been subject of investigation, yet surprisingly little is known of the fundamental photochemical reactions, because of mainly the complex nature of dye-fibre system. The effect of the chemical structure of dye on lightfastness has been mostly studied when there is substituents on the place satisfied Hammett rule. Therefore, in this investigation the effectiveness of chemical structures of Congo Red and Benzopurpurine 4B unsatisfied Hammett rule on dyeing property and lightfastness of cotton was studied. The results obtained from this study were as follows; 1. Highly polar solvents showed hypsochromic shift. 2. Adsorption isotherm curves of the two dyes were Freundlich type. And Congo Red showed good dyeing property in comparision with Benzopurpurine 4B. 3. The type of the FR curve of the two dyes was first-ordr curve. And the CF curves of the two dyes showed normal fading state during irradiation. 4. During irradiation, the Hue was changed on the part of yellowish. The Value was increasing and the Chroma was decreasing. 5. Benzopurpurine 4B showed good lightfastness in comparision with Congo Red.
  3. 이방원;김형우;김찬영;박병기 14
    PDF
    The cotton fabrics were treated with formaldehyde in the presence of zinc nitrate catalyst and urea. The effects of HCHO concentration, urea concentration, catalyst ratio, cure time and cure temperature on the physical properties of fabrics were studied. Cotton fabric finished with HCHO and urea had the lower tensile strength and tear strength than untreated one. These strength losses resulted from tighter oxymethylene crosslinks. The enhanced wrinkle recovery for fabric treated with formaldehyde in the presence of urea was indicative of the formation of urea-formaldehyde polymer. These experimental conditions were set up according to table of orthogonal arrays.
  4. 이대수;안태환 21
    PDF
    In order to obtain high dye uptake initially, polyethylene terephthalate (PET) filaments were dyed with C.I.Disperse Orange 3 and Red 1 in mixed solvents of tetrachloroethylene acidic solvent, ethyl alcohol and tetrachloroethylene basic solvent, DMF. The dyeing behavior in the mixed solvent of tetrachloroethylene and basic solvent, DMF, the initial uptake of disperse dyes increased rapidly. The shrinkage of PET increased when the solubility parameter values of PET fiber and mixed solvent approached graduately.
  5. Park, Yun-Heum;Bang, Ho-Joo 31
    PDF
    산화제를 함유한 셀룰로우스 아세테이트 필름을 피롤 증기 속에 노출시킴으로써 전도성 셀룰로우스/폴리피롤 복합체 필름을 합성하고 폴리피롤의 형성을 IR 및 전자현미경을 사용하여 확인했다. 복합체 내에 존재하는 폴리피롤의 형태는 사용한 산화제의 종류에 따라 다르게 나타났다. 산화제로 사용한 몇 가지 금속염화물 중에서 염화제 2철이 높은 전도도를 가지는 복합체를 합성하는데 가장 효과적이며 50중량 퍼센트의 염화제 2철을 첨가해서 제조한 복합체 필름의 전기전도도는 $10^{-2}S/cm$에 달한다.
  6. 장병호 37
    PDF
  7. 최철호 40
    PDF
  8. Geigy, Ciba 44
    PDF
    오늘날 셀룰로오스 염색은 단지 5가지의 염료들이 사용되고 있다. Table 1에서와 같이 황화염료 및 직접염료가 세계적으로 가장 보편적으로 사용되고 있다. 그러나 선진국에서는 지난 수년간에 걸쳐 황화염료 및 디아조 염료의 사장점유율의 현저한 감소와(Table 2,3) 반응성 염료의 사장점유율의 증가가 있었다. 오늘날 사용되는 염료 분류는 3가지의 상이한 염색원리로 섬유에 적용된다.(중략)