한국컴퓨터정보학회논문지 (Journal of the Korea Society of Computer and Information)

  • 제29권11호
  • /
  • Pages.317-324
  • /
  • 2024
  • /
  • 1598-849X(pISSN)
  • /
  • 2383-9945(eISSN)
한국컴퓨터정보학회 (Korean Society of Computer Information)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Improvement of Wear Resistance of Roller Tappet Assembly using Finite Element Analysis

  • Hun-Kee Lee (Dept. of Mechanical System Engineering, Republic of Korea Naval Academy) ;
  • Hui-Sun Ahn (Technology Solution Center, STX engine Co. Ltd) ;
  • Myeong-Chul Park (Dept. of Avionics Engineering, Kyungwoon University)
  • 투고 : 2024.10.29
  • 심사 : 2024.11.21
  • 발행 : 2024.11.29
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구는 해군 함정에 사용되는 V-956 엔진에 적용된 롤러 타펫 조립체의 내마모성 개선에 대한 연구이다. 해당 엔진 및 롤러 타펫 조립체의 창정비 주기는 엔진 가동시간으로 9천 시간 이상으로 규정되어 있음에도 불구하고, 창정비 주기 내 다수(약 60%)의 엔진에서 롤러 타펫 조립체의 극심한 마모 및 이로 인한 엔진 정상 작동 곤란 현상이 발생되었다. 이러한 롤러 타펫 조립체의 마모 원인을 규명하기 위하여 롤러 타펫 조립체 및 V-956 엔진의 운용 환경에 대한 분석을 바탕으로 ABAQUS를 활용하여 유한요소해석을 수행하였다. 유한요소해석 결과 특정한 운용 조건에서 롤러 표면의 낮은 경도값으로 인하여 마모가 발생함을 밝혀내었으며, 해석 결과에 기반하여 롤러 타펫 조립체 표면의 내마모성 개선을 위한 최적의 경도값을 제안하였다. 본 연구 결과는 해당 롤러 타펫 조립체의 국산화 개발로 이어져 양산에 적용 중에 있다.

This study is on the improvement of wear resistance of roller tappet assembly which is applied to V-956 engine. Although the TBO(Time Between Overhauls) of the engine and roller tappet assembly is more than 9,000 engine operating hours, about 60% engines which were operated within TBO suffered severe wear on roller tappet assembly and failed to operated normally. To find out the cause of wear of these roller tappet assembly, finite element analysis was performed using ABAQUS based on the investigation into roller tapper assembly and the operating conditions of V-956 engine. As a result, it was found that wear occurred due to the low hardness value of the roller surface under certain operating conditions, and based on the analysis results, we proposed the optimal hardness value for improving wear resistance on the surface of the roller tappet assembly. The results of this study were applied to the mass production of the corresponding roller tappet assembly and are currently in use.

키워드

과제정보

This study was conducted with support of the research fund from the academic research project of the Republic of Korea Naval Academy's Ocean Research Institute in 2024.

참고문헌

  1. J.F. Archard, "Contact and Rubbing of Flat Surfaces," Journal of Applied Physics, Vol. 24, pp. 981-988, August, 1953. DOI: 10.1063/1.1721448 
  2. J. Williams, "Engineering Tribology, 2nd Edition," Cambridge University Press, Chap.5, pp.167, November, 2000. 
  3. K. Kitamura, "Wear of Tool," Transactions of Materials Proceeding, Vol. 16, No. 7, pp. 493-501, November, 2007.  https://doi.org/10.5228/KSPP.2007.16.7.493
  4. S.M. Byon, "Experimental Study to Examine Wear Characteristics and Determine the Wear Coefficient of Ductile Cast Iron(DCI) Roll," Journal of Korean Society of Tribologists & Lubrication Engineers, Vol. 33, No. 3, pp. 98-105, June, 2017. DOI: 10.9725/kstle.2017.33.3.98 
  5. P. Pointner, "High strength rail steels-The importance of materia properties in contact mechanics problems," Wear, Vol. 265, pp. 1373-1379, October, 2008. DOI: 10.1016/j.wear.2008.03.015 
  6. P. Bolton, P. Clayton, "Rolling-sliding wear damage in rail and tyre steels," Wear, Vol. 93, pp. 145-165, January, 1984. DOI: 10.1016/0043-1648(84)90066-8 
  7. D. Markov, "Laboratory tests for wear of rail and wheels," Wear, Vol. 181-183, Part 2, pp. 678-686, March, 1995. DOI: 10.1016/0043-1648(95)90184-1 
  8. Y. Hu, L. Zhou, H.H. Ding, G.X. Tan, R. Lewis, Q.Y. Liu, J. Guo, W.J. Wang, "Investigation on wear and rolling contact fatigue of wheel-rail materials under various wheel/rail hardness and creepage conditions," Tribology International, Vol. 143, pp. 1-14., March, 2020. DOI: 10.1016/j.triboint.2019.106091 
  9. T.P. Leso, C.W. Siyasiya, R. Mostert, J. Moema, "Effect of normal load on the wear and rolling contact fatigue behavior of AAR class B wheel against R350HT rail in a twin disc simulator," MATEC Web of Conferences, Vol. 388, pp. 1-8, December, 2023. DOI: 10.1051.matecconf/202338805008  https://doi.org/10.1051.matecconf/202338805008
  10. A.G. Petrakova, "Optimization of material hardness of solid-rolled wheel of freight cars," Journal of Friction and Wear, Vol. 30, No. 1, pp. 41-45, May, 2009. DOI: 10.3103/S1068366609010073 
  11. A.A. Razhkovskiy, T.G. Bunkova, A.G. Petrakova, O.V. Gateluk, "Optimization of hardness ratio in rail-wheel friction pair," Journal of Friction and Wear, Vol. 36, No. 4, pp. 334-341, July, 2015. DOI: 10.3103/S1068366615040157 
  12. Z. hi, L. Nencioni, E. Meli, H. Ding, W. Wang, R. Andrea, "Effect of material hardness ratio on wear and rolling contact fatigue: Development and validation of new laws," Wear, Vol. 514-515, pp. 1-13, February, 2023. DOI: 10.1016/j.wear.2022.204561 
  13. H. Moon, G.W. Bang, "Factors and Test Methods Affecting Rolling Contact Fatigue," Journal of the Korean Society of Mechanical Engineers, Vol. 29, pp. 125-137, April, 1989 
  14. M. Fujita, K. Kuki, "An Evaluation of Mechanical Properties with the Hardness of Building Steel Structural Members for Reuse by NDT," Metals, Vol. 6, No. 247, October, 2016. DOI: 10.3390/met6100247 
  15. M. Barszcz, J. Jozwik, K Dziedzic, K. Stec, "Evaluation of tribological properties of selected engine oils during operation of the friction pairs of steel-on-steel," International Conference Energy, Environment and Material Systems, Vol. 19, October, 2017. DOI: 10.1051/e3sconf/20171903027 
  16. W.F. Rohr, "Experimental and Theoretical Investigation of Lube Oil Performance and Engine Friction," Doctoral Dissertations, University of Tennessee, Knoxville, May, 2013. 
  17. R. Steele, R. Reiff, "Rail: Its behavior and relationship to total system wear," Proceedings of 2nd conference on heavy Haul, September, 1982. 
  18. J.W. Lee, S.H. Na, D.H. Yoon, S.H. Han, "Wear Characteristics of Carburized SCM415 Steel for Control Valve," The Transaction of Korean Society of Mechanical Engineers A, Vol. 40, No. 10, pp. 873-878, October, 2016. DOI: 10.3795/KSME-A.2016.40.10.873 
  19. G.P. Cavallaro, "Bending Fatigue and Contact Fatigue Characterisitics of Carburized Gears," Surface and Coating Technology, Vol. 71, No. 2, pp. 182-192, 1995. DOI: 10.1016/0257-8972(94)01019-F 
  20. H.Y. Lee, "Effects of Carburizing Process on Sliding wear Behavior of Carburized SCM420H Steel," Tribology and Lubricants, Vol. 36, No. 1, pp. 18-26, February, 2020. DOI: 10.9725/kts.2020.36.1.18