Advances in concrete construction

  • 제17권4호
  • /
  • Pages.211-220
  • /
  • 2024
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effects of waste marble and glass powders on concrete properties and performance

  • Nouraldin Abunassar (Department of Civil Engineering, Faculty of Engineering, Eastern Mediterranean University) ;
  • Tulin Akcaoglu (Department of Civil Engineering, Faculty of Engineering, Eastern Mediterranean University)
  • 투고 : 2021.07.23
  • 심사 : 2024.08.27
  • 발행 : 2024.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

Concrete, consisting mainly of cement, water and aggregates; is the most used construction material all over the world. Cement manufacturing industry is one of the carbon dioxide producing sources that contributes to global warming. Therefore, in the last few years, there is a growing interest in using waste materials and by-products as cement replacement materials. Using these kinds of materials as a part of cement replacement reduces the air pollution, cost and also enhances some properties of concretes. In the present work, marble dust (MD) was examined as a partial cement replacement material with seven proportions as 0%, 10%, 20%, 30%, 40%, 50%, 60% and glass powder (GP) was used as an additive, 8% by cement weight, in a 0.55 water-binder ratio concrete. In order to evaluate their effects; workability, strength (compressive, flexural and split tensile), alkalinity, sulphate resistance and ultrasonic pulse velocity tests were performed. Experimental results indicated that with MD replacement and GP addition; there is a loss in the workability but improvement in mechanical properties. With 10% replacement of MD compressive, flexural and tensile strengths increased by 10.7%, 6.2% and 5.3% respectively. Moreover, up to 30% replacement of MD reasonable strength values were obtained.

키워드

참고문헌

  1. Al-Amoudi, O.S.B. (2002), "Attack on plain and blended cements exposed to aggressive sulfate environments", Cement Concrete Compos., 24(3-4), 305-316. https://doi.org/10.1016/S0958-9465(01)00082-8
  2. Amran, Y.M., Alyousef, R., Alabduljabbar, H. and El-Zeadani, M. (2020), "Clean production and properties of geopolymer concrete; A review", J. Cleaner Product., 251, 119679. https://doi.org/10.1016/j.jclepro.2019.119679
  3. Amran, M., Debbarma, S. and Ozbakkaloglu, T. (2021), "Fly ash-based eco-friendly geopolymer concrete: A critical review of the long-term durability properties", Constr. Build. Mater., 270, 121857. https://doi.org/10.1016/j.conbuildmat.2020.121857
  4. Anwar, A. (2016), "The influence of waste glass powder as a pozzolanic material in concrete", Int. J. Civil Eng. Technol., 7(6), 131-148.
  5. Ashish, D.K. (2018), "Feasibility of waste marble powder in concrete as partial substitution of cement and sand amalgam for sustainable growth", J. Build. Eng., 15, 236-242. https://doi.org/10.1016/j.jobe.2017.11.024
  6. ASTM C 597 (1999), Standard Test Method for Pulse Velocity through Concrete; Annual Book of ASTM Standards, West Conshohocken, PA, USA.
  7. ASTM C136/C136M-14 (2014), Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates, ASTM International, West Conshohocken, PA, USA.
  8. ASTM C143/C143M-15a (2015), Standard test method for slump of hydraulic-cement concrete; ASTM International, West Conshohocken, PA, USA.
  9. ASTM C39/C39M-18 (2018), Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens; ASTM International, West Conshohocken, PA, USA.
  10. ASTM C496/C496M-17 (2017), Standard test method for splitting tensile strength of cylindrical concrete specimens; ASTM International, West Conshohocken, PA, USA.
  11. ASTM C78/C78M-16 (2016), Standard test method for flexural strength of concrete (using simple beam with third-point loading); ASTM International, West Conshohocken, PA, USA.
  12. Bescher, E., Rice, E.K., Ramseyer, C. and Roswurm, S. (2016), "Sulfate resistance of calcium sulphoaluminate cement", J. Struct. Integr. Maint., 1(3), 131-139. http://dx.doi.org/10.1080/24705314.2016.1211235
  13. Bhat, V.V. and Rao, N.B. (2014), "Influence of glass powder on the properties of concrete", Int. J. Eng. Trends Technol., 16, 196-199. https://www.doi.org/10.14445/22315381/IJETT-V16P242
  14. Binici, H., Kaplan, H. and Yilmaz, S. (2007), "Influence of marble and limestone dusts as additives on some mechanical properties of concrete", Scientif. Res. Essays, 2(9), 372-379.
  15. Karasahin, M. and Terzi, S. (2007), "Evaluation of marble waste dust in the mixture of asphaltic concrete", Constr. Build. Mater., 21(3), 616-620. https://doi.org/10.1016/j.conbuildmat.2005.12.001
  16. Karim, Y., Khan, Z., Alsoufi, M.S. and Yunus, M. (2016), "A review on recycled aggregates for the construction industry", Am. J. Civil Eng. Architect., 4(1), 32-38. https://doi.org/10.12691/ajcea-4-1-5
  17. Khaliq, S.U., Shahzada, K., Alam, B., Bilal, F., Zeb, M. and Akbar, F. (2016), "Marble powder's effect on permeability and mechanical properties of concrete", Int. J. Civil Environ. Eng., 10(4), 537-542.
  18. Kumar, R. and Kumar, S.K. (2015), "Partial replacement of cement with marble dust powder", Int. J. Eng. Res. Applicat., 5(8), 106-114.
  19. Kumar, A. and Thakur, A. (2018), "Strength behaviour of concrete produced with marble dust powder", Int. J. Civil Eng. Technol., 9(7), 1058-1065.
  20. Malay, N., Kumar, M. and Kujur, J. (2015), "Effect of partial replacement of cement by marble dust on compressive strength and carbonation of PPC concrete", In: International UKIERI Concrete Congress. NIT Jalandhar, Punjab, India. https://doi.org/10.13140/RG.2.2.12150.40003
  21. Raghunath, P.N., Suguna, K., Karthick, J. and Sarathkumar, B. (2019), "Mechanical and durability characteristics of marble-powder-based high-strength concrete", Scientia Iranica, 26(6), 3159-3164. https://www.doi.org/10.24200/SCI.2018.4953.1005
  22. Sakalkale, A.D., Dhawale, G.D. and Kedar, R.S. (2014), "Experimental study on use of waste marble dust in concrete", Int. J. Eng. Res. Appl., 4(10), 44-50.
  23. Samadi, M., Huseien, G.F., Mohammadhosseini, H., Lee, H.S., Lim, N.H.A.S., Tahir, M.M. and Alyousef, R. (2020), "Waste ceramic as low cost and eco-friendly materials in the production of sustainable mortars", J. Cleaner Product., 266, 121825. https://doi.org/10.1016/j.jclepro.2020.121825
  24. Saribiyik, M., Piskin, A. and Saribiyik, A. (2013), "The effects of waste glass powder usage on polymer concrete properties", Constr. Build. Mater., 47, 840-844. https://doi.org/10.1016/j.conbuildmat.2013.05.023
  25. Sharma, N. and Kumar, R. (2015), "Use of waste marble powder as partial replacement in cement sand mix", Int. J. Eng. Res. Appl., 4(5), 501-504. https://www.doi.org/10.17577/IJERTV4IS050698
  26. Sharma, U., Khatri, A. and Kanoungo, A. (2014), "Use of waste marble dust in Concrete", In: National Conference on Sustainable Infrastructure Development, Chandigarh, India.
  27. Shilpa, R. and Kumar, P.R. (2014), "Effect of using glass powder in concrete", Int. J. Innov. Res. Sci. Eng. Technol., 3(5), 421-427.
  28. Shirule, P.A., Rahman, A. and Gupta, R.D. (2012), "Partial replacement of cement with marble dust powder", Int. J. Adv. Eng. Res. Studies, 1(3), 175-177.
  29. Singh, G. and Madan, S.K. (2019), "Durability of concrete made with marble dust as partial replacement of cement subjected to sulphate attack", Infra Construction and Equipment Magazine, NBMCW.
  30. Sivakrishna, A., Adesina, A., Awoyera, P.O. and Kumar, K.R. (2020), "Green concrete: A review of recent developments", Materials Today: Proceedings, 27, 54-58. https://doi.org/10.1016/j.matpr.2019.08.202
  31. Topcu, I.B. and Canbaz, M. (2004), "Properties of concrete containing waste glass", Cement Concrete Res., 34(2), 267-274. https://doi.org/10.1016/j.cemconres.2003.07.003
  32. Vijayakumar, G., Vishaliny, H. and Govindarajulu, D. (2013), "Studies on glass powder as partial replacement of cement in concrete production", Int. J. Emerg. Technol. Adv. Eng., 3(2), 153-157.