Journal of the korean academy of Pediatric Dentistry (대한소아치과학회지)

Korean Academy of Pediatric Dentistry (대한소아치과학회)
권호 표지
DOI QR코드

DOI QR Code

Color Stability and Surface Roughness of Single-Shade Composite Resin after Finishing and Polishing

  • Hyewon Shin (Department of Pediatric Dentistry, Oral Science Research Center, College of Dentistry, Gangneung-Wonju National University) ;
  • Haeni Kim (Department of Pediatric Dentistry, Oral Science Research Center, College of Dentistry, Gangneung-Wonju National University) ;
  • Minho Hong (Department of Dental Biomaterials and Research Institute of Oral Science, College of Dentistry, Gangneung-Wonju National University) ;
  • Juhyun Lee (Department of Pediatric Dentistry, Oral Science Research Center, College of Dentistry, Gangneung-Wonju National University)
  • Received : 2024.04.25
  • Accepted : 2024.05.30
  • Published : 2024.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

This study aims to evaluate the color stability and surface roughness of the single-shade composite resin after finishing and polishing for primary molars. A single-shade composite resin (OM, OMNICHROMA) and two multi-shade composite resins (FT, FiltekTM Z350XT; ES, ESTELITE® SIGMA QUICK) were included. The specimens were divided into three subgroups using different polishing methods: control, Sof-Lex XT, and Sof-Lex Diamond. For color stability tests, cavities were prepared on extracted primary second molars and restored with experimental composite resins. Each specimen was immersed in the coffee solution for 48 hours. The color difference of each specimen was calculated. For surface roughness tests, cylindrical specimens were crafted with experimental composite resins. Surface roughness was analyzed using an atomic force microscope and a scanning electron microscope. In the color stability tests, FT demonstrated a significantly lower ΔEab than ES among the control groups, but no significant differences were observed between the ΔEab values of OM and FT or OM and ES. Additionally, no significant differences were found between the Sof-Lex XT and Sof-Lex Diamond subgroups in the three composite groups. Moreover, no significant differences in the surface roughness were found between the three composite groups, regardless of the polishing methods. The single-shade composite resin demonstrated comparable color stability and surface roughness to that of the multi-shade composite resins regardless of the polishing methods used in restoring primary molars. The single-shade composite resin is expected to be applicable in clinical pediatric dentistry reducing chair time due to the easy shade matching procedures.

Keywords

References

  1. Lynch CD, Frazier KB, McConnell RJ, Blum IR, Wilson NH : Minimally invasive management of dental caries: Contemporary teaching of posterior resin-based composite placement in U.S. and Canadian dental schools. J Am Dent Assoc, 142:612-620, 2011.
  2. Pani SC, Saffan AA, AlHobail S, Salem FB, AlFuraih A, AlTamimi M : Esthetic Concerns and Acceptability of Treatment Modalities in Primary Teeth: A Comparison between Children and Their Parents. Int J Dent, 2016:3163904, 2016.
  3. Salami A, Walia T, Bashiri R : Comparison of Parental Satisfaction with Three Tooth-Colored Full-Coronal Restorations in Primary Maxillary Incisors. J Clin Pediatr Dent, 39:423-428, 2015.
  4. Alhamdan EM, Bashiri A, Alnashmi F, Al-selah S, Al-shahrani K, Al-shahrani S, Alsharani A, Alzahrani KM, Alqarawi FK, Vohra F, Abduljabbar T : Evaluation of smart chromatic technology for a single-shade dental polymer resin: An in vitro study. Appl Sci, 11:10108-10118, 2021.
  5. Morsy A, Gamal W, Riad M : Color matching of single shade structurally colored universal resin composite with the surrounding hard dental tissues. Egyptian Dent J, 66:2721-2727, 2020.
  6. Iyer RS, Babani VR, Yaman P, Dennison J : Color match using instrumental and visual methods for single, group, and multi-shade composite resins. J Esthet Restor Dent, 33:394-400, 2021.
  7. Sanchez NP, Power JM, Paravina RD : Instrumental and visual evaluation of the color adjustment potential of resin composite. J Esthet Restor Dent, 31:465-470, 2019.
  8. Kim HS, Lee JH, Kim HN, Park HW : Surface Roughness and cariogenic microbial adhesion after polishing of smart chromatic technology-based composite resin. J Korean Acad Pediatr Dent, 50:65-74, 2023.
  9. Hayashi K, Kurokawa H, Saegusa M, Aoki R, Takamizawa T, Kamimoto A, Miyazaki M : Influence of surface roughness of universal shade resin composites on color adjustment potential. Dent Mater J, 42:676-682, 2023.
  10. Guler AU, Guler E, Yuce AC, Ertas E : Effects of polishing procedures on color stability of composite resins. J Appl Oral Sci, 17:108-112, 2009.
  11. Bansal K, Acharya SR, Saraswathi V : Effect of alcoholic and non-alcoholic beverages on color stability and surface roughness of resin composites: An in vitro study. J Conserv Dent, 15:283-288, 2021.
  12. Tan BL, Yap AUJ, Ma HNT, Chew J, Tan WJ : Effect of Beverages on Color and Translucency of New Tooth-Colored Restoratives. Oper Dent, 40:E56-E65, 2015.
  13. da Silva TM, Dantas DCB, Franco TT, Franco LT, Huhtala MFRL : Surface degradation of composite resins under staining and brushing challenges. J Dent Sci, 14:87-92, 2019.
  14. Lee YK, Lu H, Oguri M, Powers JM : Changes in gloss after simulated generalized wear of composite resins. J Prosthet Dent, 94:370-376, 2005.
  15. Asmussen E : Softening of BISGMA-based polymers by ethanol and by organic acids of plaque. Scand J Dent Res, 92:257-261, 1984.
  16. Hyun HK, Ferracane JL : Influence of biofilm formation on the optical properties of novel bioactive glass-containing composites. Dent Mater, 32:1144-1151, 2016.
  17. Asmussen E, Hansen EK : Surface discoloration of restorative resins in relation to surface softening and oral hygiene. Scand J Dent Res, 94:174-177, 1986.
  18. Lee YK, Powers JM : Discoloration of dental resin composites after immersion in a series of organic and chemical solutions. J Biomed Mater Res B Appl Biomater, 73:361-367, 2005.
  19. Jung M, Eichelberger K, Klimek J : Surface geometry of four nanofiller and one hybrid composite after one-step and multiple-step polishing. Oper Dent, 32:347-355, 2007.
  20. Watanabe T, Miyazaki M, Moore BK : Influence of polishing instruments on the surface texture of resin composites. Quintessence Int, 37:61-67, 2006.
  21. Zimmerli B, Lussi A, Flury S : Operator variability using different polishing methods and surface geometry of a nanohybrid composite. Oper Dent, 36:52-59, 2011.
  22. Kim J, Paravina R, Chen JW : In Vivo Evaluation of Color of Primary Teeth. Pediatr Dent, 29:383-386, 2007.
  23. Ellakany P, Fouda SM, Alghamdi MA, Aly NM : Comparison of the color stability and surface roughness of 3-unit provisional fixed partial dentures fabricated by milling, conventional and different 3D printing fabrication techniques. J Dent, 131:104458, 2023.
  24. Gonulol N, Yilmaz F : The effects of finishing and polishing techniques on surface roughness and color stability of nanocomposites. J Dent, 40(Suppl 2):E64-E70, 2012.
  25. Ertas E, Guler AU, Yucel AC, Koprulu H, Guler E : Color stability of resin composites after immersion in different drinks. Dent Mater J, 25:371-376, 2006.
  26. Sideridou I, Tserki V, Papanastasiou G : Study of water sorption, solubility and modulus of elasticity of lightcured dimethacrylate-based dental resins. Biomaterials, 24:655-665, 2003.
  27. Tanthanuch S, Kukiattrakoon B, Peerasukprasert T, Chanmanee N, Chaisomboonphun P, Rodklai A : The effect of red and white wine on color changes of nanofilled and nanohybrid resin composites. Restor Dent Endod, 41:130-136, 2016.
  28. Kim HJ, Kim MY, Song BC, Kim SH, Kim JH : Effect of polishing methods on color change by water absorption in several composite resins. J Dent Rehabil Appl Sci, 35:1-10, 2019.
  29. Senawongse P, Pongprueksa P : Surface roughness of nanofill and nanohybrid resin composites after polishing and brushing. J Esthet Restor Dent, 19:265-273, 2007.
  30. Alshehri A, Alhalabi F, Mustafa M, Awad MM, Alqhtani M, Almutairi M, Alhijab F, Jurado CA, Fischer NG, Nurrohman H, Alshabib A : Effects of accelerated aging on color stability and surface roughness of a biomimetic composite: an in vitro study. Biomimetics (Basel), 7:158, 2022.
  31. Kumari RV, Nagaraj H, Siddaraju K, Poluri RK : Evaluation of the effect of surface polishing, oral beverages and food colorants on color stability and surface roughness of nanocomposite resins. J Int Oral Health, 7:63-70, 2015.
  32. Jaramillo-Cartagena R, Lopez-Galeano EJ, Latorre-Correa F, Agudelo-Suarez AA : Effect of polishing systems on the surface roughness of nano-hybrid and nano-filling composite resins: A systematic review. Dent J (Basel), 9:95, 2021.
  33. El-Rashidy AA, Shaalan O, Abdelraouf RM, Habib NA : Effect of immersion and thermocycling in different beverages on the surface roughness of single- and multi-shade resin composites, BMC Oral Health, 23:367, 2023.
  34. Aydin N, Karaoglanoglu S, Oktay EA, Ersoz B : Investigation of single shade composite resin surface roughness and color stability. J Dent Fac Ataturk Uni, 31:207-214, 2021.
  35. Da Costa J, Ferracane J, Paravina RD, Mazur RF, Roeder L : The effect of different polishing systems on surface roughness and gloss of various resin composites. J Esthet Restor Dent, 19:214-224, 2007.
  36. Amaya-Pajares SP, Koi K, Watanabe H, da Costa JB, Ferracane JL : Development and maintenance of surface gloss of dental composites after polishing and brushing: Review of the literature. J Esthet Resor Dent, 34:15-41, 2022.
  37. AlAli M, Silikas N, Satterthwaite J : The effects of toothbrush wear on the surface roughness and gloss of resin composites with various types of matrices. Dent J, 9:8, 2021.
  38. Ruivo MA, Pacheco RR, Sebold M, Giannini M : Surface roughness and filler particles characterization of resin-based composites. Microsc Res Tech, 82:1756-1767, 2019.
  39. Park JW, An JS, Lim WH, Lim BS, Ahn SJ : Microbial changes in biofilms on composite resins with different surface roughness: An in vitro study with a multispecies biofilm model. J Prosthet Dent, 122:493.E1-E8, 2019.
  40. Mizutani K, Takamizaawa T, Ishii R, Shibasaki S, Kurokawa H, Suzuki M, Tsujimoto A, Miyazaki M : Flexural properties and polished surface characteristics of a structural colored resin composite. Oper Dent, 46:E117-E131, 2021.
  41. Sang EJ, Song JS, Chung SH, Jin BH, Hyun HK : Influence of a new polishing system on changes in gloss and surface roughness of resin composites after polishing and brushing. Dent Mater J, 40:727-735, 2021.
  42. Ahamed SAS, Raheel SA, Ajmal MB, Kaur M, Alqahtani NM, Tasleem R, Bahamdan GK, Hegde M, Bhavikatti SK : Evaluation of color stability of composite resin used to characterize acrylic teeth - An in vitro study. Appl Sci, 13:1498-1510, 2023.
  43. Falkensammer F, Arnetzl GV, Wildburger A, Freudenthaler J : Color stability of different composite resin materials. J Prosthet Dent, 109:378-383, 2013.
  44. Kim YS, Park HW, Lee JH, Kim HN : Evaluation of the color adjustment potential of single-shade composite resin in primary teeth. J Korean Acad Pediatr Dent, 50:113-120, 2023.